Order no.: PCE-123

PCE-123 is a voltage calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the calibrator useful in a wide range of applications.


- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz

 

Manufacturer: PCE Instruments
US$ 551.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-123

PCE-123 is a voltmeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use voltmeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the voltmeter useful in a wide range of applications.


- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz

 

Manufacturer: PCE Instruments
US$ 551.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-C-R1S 50t

Due to its ball bearing, the load cell has a special resistance against lateral forces. The load cell has a strong output signal of approx. 4 mV / V and works with a measurement uncertainty of 0.03% F.S.. The load cell is used especially in harsh environments such as truck scales, train scales, machine weighing, etc..

- Rated load / force F.S.: 50 t / 0.5 MN
- Corrosion resistant IP67
- Bearing surface ball bearing
- 700 Ohm

 

- Other force sensor nominal loads available - see variants!

Manufacturer: PCE Instruments
US$ 550.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 1000L

The relative pressure HVAC meter PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this HVAC pressure meter in the range between -100 ... 2000 kPa. The relative pressure HVAC meter PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

 

- Measuring range pressure: -100 ... 2000 kPa relative
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: <± 0.5% of the measuring range
- USB interface
- Data logger
- Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

Manufacturer: PCE Instruments
US$ 550.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 1000L

The relative pressure manometer PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure manometer in the range between -100 ... 2000 kPa. The relative pressure manometer PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.


- Measuring range pressure: -100 ... 2000 kPa relative
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: <± 0.5% of the measuring range
- USB interface
- Data logger
- Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

Manufacturer: PCE Instruments
US$ 550.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 1000L

The relative pressure gauge PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure gauge in the range between -100 ... 2000 kPa. The relative pressure gauge PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.


- Measuring range pressure: -100 ... 2000 kPa relative
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: <± 0.5% of the measuring range
- USB interface
- Data logger
- Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

Manufacturer: PCE Instruments
US$ 550.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 1000L

The relative pressure meter PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure meter in the range between -100 ... 2000 kPa. The relative pressure meter PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.


- Measuring range pressure: -100 ... 2000 kPa relative
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: <± 0.5% of the measuring range
- USB interface
- Data logger
- Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

Manufacturer: PCE Instruments
US$ 550.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 clamp on tester is used to measure the current of 1- or 3-phase loads. This clamp on tester PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp on tester.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 HVAC meter is used to measure the current of 1- or 3-phase loads. This HVAC meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the HVAC meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the 1-phase power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 3-phase power meter is used to measure the current of 1- or 3-phase loads. This 3-phase power meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the 3-phase power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 power analyzer is used to measure the current of 1- or 3-phase loads. This power analyzer PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power analyzer.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 50
The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeterPCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: GS-3

Data Logger with acoustic signal, internal memory and software.


- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV.
- Online, to transfer data to a PC , with pulse interval of 10, 30 or 60 sg
- With additional alarm and acoustic pulse indicator

Manufacturer: Gamma-Scout
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: GS-3

Online version - the instrument ican be used to send reatime radiation measurement data to a PC or Laptop. It is a Geiger counter with acoustic signal, internal memory and software. The online version is mainly used in the radiation testing of imported goods (steel, wood) from critical areas, as well as to measure food which has been previously irradiated. Very often the instrument is a perfect measurement tool (because of the realtime data transfer) for industrial or institutional research and development.


- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV
- Online, to transfer data to a PC, with pulse interval of 10, 30 or 60 sg
- With additional alarm and acoustic pulse indicator

Manufacturer: Gamma-Scout
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: GS-3

Radiation detector with acoustic signal, internal memory and software.


- Measurement ranges: 0.01 µSv/h - 1000 µSv/h
- Radiation detector: Geiger-Müller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV
- Online, to transfer data to a PC , with pulse interval of 10, 30 or 60 sg
- With additional alarm and acoustic pulse indicator

Manufacturer: Gamma-Scout
US$ 543.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer