Industrial Measurement Products and Solutions
Order no.: PCE-BDM 20-ICA
This is a digital multimeter for a stationary workplace. In addition to measuring the current, voltage and resistance, the PCE-BDM 20-ICA digital multimeter can also measure the temperature using two thermocouples and also determine the conductivity.

Parameter:
- AC voltage, DC voltage
- AC / DC
- Resistance, conductivity
- Capacitance measurement, temperature
- Frequency measurement , duty cycle ratio
- Pulse width, continuity test
- Diode test
Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-BDM 20-ICA
This is a electrical tester for a stationary workplace. In addition to measuring the current, voltage and resistance, the PCE-BDM 20-ICA electrical tester can also measure the temperature using two thermocouples and also determine the conductivity.

Parameter:
- AC voltage, DC voltage
- AC / DC
- Resistance, conductivity
- Capacitance measurement, temperature
- Frequency measurement , duty cycle ratio
- Pulse width, continuity test
- Diode test
Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MSR 400

PCE-MSR 400 is a multi-position magnetic stirrer with four stirring points for stirring up to four beakers simultaneously. This multi-beaker laboratory stir plate uses the induction method for quiet stirring. The flat stainless steel design is both low profile and easy to clean.


- Adjustable speed: 15 ... 1200 rpm
- Timer
- Stir plate made of stainless steel
- IP65 ingress protection rating
- 4 stirring points

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SLT-KIT
The noise meter /sound meter SLT consists of a measuring microphone with handle and a wall holder with 1.5 m cable, a noise transmitter and a digital display. The main application of the noise meter /sound meter is the continuous noise measurement and noise monitoring of factory halls, production rooms and large events (discotheques, folk festivals, kart tracks, etc.).

- Measuring range: 30...130dB(A)
- Resolution: 0.1dB
- Accuracy: ±1.5dB
- Alarm relay: 5A/240VAC
- Input.: 110V or 220V/50Hz or 60HZ
Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SLT-KIT
The sound level meter / noise level meter  SLT is used for continuous measurement of noise in various applications and industries. The digital indicator of the sound level meter has a relay output to control alarm beeps or the blinking lights that are an optical or acoustic warning as well as a regulation output. The limit value for the alarm output can be programmed in the indicator. The kit includes the acoustic calibrator PCE-SC 42 for convenient, regular calibration.

- Measuring range: 30...130dB(A)
- Resolution: 0.1dB
- Accuracy: ±1.5dB
- Alarm relay: 5A/up to 240VAC
- Input.: 110V or 220V/50Hz or 60HZ
Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GM 80
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
Manufacturer: PCE Instruments
US$ 592.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GM 80
The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
Manufacturer: PCE Instruments
US$ 592.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GM 80
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
Manufacturer: PCE Instruments
US$ 592.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GM 80
The surface testing gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
Manufacturer: PCE Instruments
US$ 592.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Automotive Tester is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Automotive Tester goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 5000 µm / 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Coating Thickness Gauge is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Coating Thickness Gauge goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 0 ... 5000 µm / 0 ... 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Paint Gauge is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Paint Gauge goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 5000 µm / 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Thickness Test Instrument is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Thickness Test Instrument goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.

  • Measuring range: 5000 µm / 196.8 mils
  • Ferrous metals (Fe)
  • Non-ferrous metals (NFe)
  • Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)
Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CWR1

Wind Measurer CWR1 for weather monitoring. Basic wind vane meter with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal.


- Simple wind transmitter
- 12 m connection cable
- Easy assembly
- 4 … 20 mA output

Manufacturer: Adolf Thies GmbH & Co. KG
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 28-ICA

The PCE-CT 28 Coating Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Coating Thickness Gauge stands out due to its high range of measurement.


- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9 mils)
  1 µm / 0.04 mils (above the range)
- Accuracy: ±2 % or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
US$ 587.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PWM 10
The HVAC measuring device is suitable for testing and setting high-efficiency pumps (HE pumps). The HVAC measuring device can be used both as a transmitter and as a receiver of PWM signals. The HVAC measuring device is able to check the pump controller in addition to the HE pump.

- PWM frequency: 40 ... 2000 Hz
- Measuring range: 0 ... 15 V
- PWM simulation
- Measurement and simulation 
- Testing of HE pumps
Manufacturer: PCE Instruments
US$ 587.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 28-ICA

The PCE-CT 28 Paint Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Paint Thickness Gauge stands out due to its high range of measurement.


- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9 mils)
  1 µm / 0.04 mils (above the range)
- Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
US$ 587.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 28-ICA

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.


- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9 mils)
  1 µm / 0.04 mils (above the range)
- Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 587.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PWM 10
The pump calibrator is suitable for testing and setting high-efficiency pumps (HE pumps). The pump calibrator can be used both as a transmitter and as a receiver of PWM signals. The pump calibrator is able to check the pump controller in addition to the HE pump.

- PWM frequency: 40 ... 2000 Hz
- Measuring range: 0 ... 15 V
- PWM simulation
- Measurement and simulation 
- Testing of HE pumps
Manufacturer: PCE Instruments
US$ 587.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 28-ICA

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.


- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9 mils)
  1 µm / 0.04 mils (above the range)
- Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 587.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer