Car Measuring Device PCE-EVSE 310+
US$ 562.00
ex. VAT, ex. delivery costs
Topseller
The Car Measuring Device is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets
- incl. type 2 plug and adapter to type 1
Electric Vehicle EVSE Tester PCE-EVSE 310+
US$ 562.00
ex. VAT, ex. delivery costs
Topseller
The electric vehicle EVSE tester is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets
incl. type 2 plug and adapter to type 1
EV Test Instrument PCE-EVSE 310+
US$ 562.00
ex. VAT, ex. delivery costs
Topseller
The EV test instrument is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets
incl. type 2 plug and adapter to type 1
PAT Tester / Portable Appliance Testing Equipment PCE-EVSE 310+
US$ 562.00
ex. VAT, ex. delivery costs
Topseller
The PAT tester / portable appliance testing equipment is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets
incl. type 2 plug and adapter to type 1
Air Flow Meter Alarm Controller PCE-WSAC 50
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-WSAC 50 is an air flow meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This air flow meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


  • Pre-alarm and full alarm with visual and audible warnings
  • Optional RS-485 modbus interface for data communication
  • Measuring range: 0 … 50 m/s or 0 … 110 mph
  • Incl. ISO calibration certificate

Air Flow Meter PCE-WSAC 50-910
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

A strong wind is not esssential to use the PCE-WSAC 50-910 air flow meter, as it has a measuring range of 0 to 110 mph. In addition to the actual wind speed, this versatile air flow meter can display the average wind speed over the last two minutes and five minutes. The air flow meter is suitable for numerous wind detection applications in outdoor industries, e.g. on construction sites.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 4...20 mA
- incl. ISO calibration certificate

Air Flow Meter PCE-WSAC 50-920
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-WSAC 50-920 air flow meter shows the speed of the wind and also the average figure over the prior two minutes and five minutes. The smallest wind motion is detected by this accurate air flow meter. The timber industry, the mining industry, and the construction industry are some examples of applicable wind monitoring application areas for the air flow meter.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 0...10 V
- incl. ISO calibration certificate

Air Velocity Meter Alarm Controller PCE-WSAC 50
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-WSAC 50 is an air velocity meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This air velocity meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


  • Pre-alarm and full alarm with visual and audible warnings
  • Optional RS-485 modbus interface for data communication
  • Measuring range: 0 … 50 m/s or 0 … 110 mph
  • Incl. ISO calibration certificate

Air Velocity Meter PCE-WSAC 50-910
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

A strong wind is not esssential to use the PCE-WSAC 50-910 air velocity meter, as it has a measuring range of 0 to 110 mph. In addition to the actual wind speed, this versatile air velocity meter can display the average wind speed over the last two minutes and five minutes. The air velocity meter is suitable for numerous wind detection applications in outdoor industries, e.g. on construction sites.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 4...20 mA
- incl. ISO calibration certificate