The PCE-JR-911 Infrared Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Infrared Thermometer comes complete with a Data Logger, allowing the user to program specific time intervals for taking measurements, such as over an entire week. This kind of temperature logging testers is manufacturer calibrated and the ISO certificate is delivery included.

- Non-Contact temperature measurement (infrared)
- Sampling rate: 1/ sec.
- Memory size: 1200 values
- Adjustable date and time
- Printer, memory, data Logger integrated
- Incl. ISO calibration certificate

The PCE-JR-911 Data Logger is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Data Logger comes complete with a Data Logger, allowing the user to program specific time intervals for taking measurements, such as over an entire week.

This kind of temperature logging testers is manufacturer calibrated and the ISO certificate is delivery included.

- Non-Contact temperature measurement (infrared)
- Sampling rate: 1/ sec.
- Memory size: 12,000 values
- Adjustable date and time
- Printer, memory, data Logger integrated
- Incl. ISO calibration certificate

The Multifunction Conductivity Meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction conductivity meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

The multifunction pH meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction pH meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

The pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

The water analysis meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable water analysis meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

PCE-CT 50 is a Automotive Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm 

The SKM 1.0 Automotive Tester precisely measures closing forces to prevent personal injuries. The closing Automotive Tester is suitable for measuring forces in the field of automatic doors, windows, and cut off walls; such as in warehouses, general stores, and public offices. The Automotive Tester is delivered manufacturer calibrated and can optionally be certified to ISO standards.

- Measurement range: 1000 N
- Resolution: 1 N
- Accuracy: ± 3 N
- External load cell

PCE-CT 50 is a Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, copper,  brass, zinc, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm 

The SKM 1.0 Force Gauge precisely measures closing forces to prevent personal injuries. The closing Force Gauge is suitable for measuring forces in the field of automatic doors, windows, and cut off walls; such as in warehouses, general stores, and public offices. The Force Gauge is delivered manufacturer calibrated and can optionally be certified to ISO standards.

- Measurement range: 1000 N
- Resolution: 1 N
- Accuracy: ± 3 N
- External load cell

PCE-CT 50 is a Paint Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

PCE-CT 50 is a Surface Testing - Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

PCE-CT 50 is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

PCE-CT 50 is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils
  ±3.5 % of 1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm