Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality decibel meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory or an SD card (SD card included).


- Measuring range:
  30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ± 3.5 dB (31.5 Hz) ... ± 5.6 dB (8000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A and C

Manufacturer: PCE Instruments
US$ 526.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality noise dose meter or sound level meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory or an SD card (SD card included).


- Measuring range: 30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ± 3.5 dB (31.5 Hz) ... ± 5.6 dB (8000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A and C

 

Manufacturer: PCE Instruments
US$ 526.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality noise meter or sound meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory or an SD card (SD card included).


- Measuring range: 30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ± 3.5 dB (31.5 Hz) ... ± 5.6 dB (8000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A and C

 

Manufacturer: PCE Instruments
US$ 526.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality sound level meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory or an SD card (SD card included).


- Measuring range:
  30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ± 3.5 dB (31.5 Hz) ... ± 5.6 dB (8000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A and C

 

Manufacturer: PCE Instruments
US$ 526.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-NDL 10

PCE-NDL 10 is a high-quality class 2 sound level meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory or an SD card (SD card included). These sound logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- Measuring range:
  30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ± 3.5 dB (31.5 Hz) ... ± 5.6 dB (8000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A and C

Manufacturer: PCE Instruments
US$ 526.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VT 2700

PCE-VT 2700 is a portable digital battery-powered HVAC meter used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes.  PCE-VT 2700 is one of many high-quality test instruments offered by PCE Instruments (PCE). PCE's vibration test instruments are manufacturer calibrated and includes an ISO calibration certificate. Commonly used to measure the vibration of parts, machinery, or other equipment, the PCE-VT 2700 vibration test instrument features peak hold functionality and shows acceleration, velocity, and displacement directly on its 4-digit LCD display, making it an especially handy inspection tool for maintenance staff and field personnel.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz (in 10 kHz
  mode) acceleration; 10 Hz ... 1 kHz velocity / displacement
- Resolution: 0.1 m/s² / 0.1 yd/s²; 0.1 mm/s / 0.004 in/s ; 1 µm / 3.3814e-14 oz ;
  1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included 

 

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 200-S

PCE-VE 200-S is an industrial inspection camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 1 m / 3.28 ft cable length
- 180° image rotation


Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VT 2700

PCE-VT 2700 is a portable digital battery-powered HVAC meter used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes.  PCE-VT 2700 is one of many high-quality test instruments offered by PCE Instruments (PCE). PCE's vibration test instruments are manufacturer calibrated and includes an ISO calibration certificate. Commonly used to measure the vibration of parts, machinery, or other equipment, the PCE-VT 2700 vibration test instrument features peak hold functionality and shows acceleration, velocity, and displacement directly on its 4-digit LCD display, making it an especially handy inspection tool for maintenance staff and field personnel.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz (in 10 kHz
  mode) acceleration; 10 Hz ... 1 kHz velocity / displacement
- Resolution: 0.1 m/s² / 0.1 yd/s²; 0.1 mm/s / 0.004 in/s ; 1 µm / 3.3814e-14 oz ;
  1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included 

 

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VT 2700S

PCE-VT 2700S is a factory-calibrated (certificate included) portable digital battery-powered handheld condition monitoring vibration meter used to measure the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes. The PCE-VT 2700S comes with a special attachment to adapt the probe for handheld use.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz
  (in 10 kHz mode) acceleration; 10 Hz ... 1 kHz velocity /
  displacement
- Resolution: 0.1 m/s? / 0.1 yd/s?; 0.1 mm/s / 0.004 in/s ; 1 µm /
  3.3814e-14 oz ; 1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included

 

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDD 10

The PCE-DDD 10 Shore D durometer is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).


- Portable handheld digital device
- For Shore D hardness testing
- Single and serial measurements
- Data transfer to PC

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IT 120
The electrical tester PCE-IT 120 detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this PCE-IT 120 electrical tester offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ.

- DC test voltage: 250/500 / 1000V
- OLED display
- Automatic polarity display
- Automatic range selection
- PI and DAR test
- Degree of protection / standardization: IEC 1010-1, 700V CAT III
Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VT 2700S

PCE-VT 2700S is a factory-calibrated (certificate included) portable digital battery-powered handheld accelerometer used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes. The PCE-VT 2700S comes with a special attachment to adapt the probe for handheld use.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz
  (in 10 kHz mode) acceleration; 10 Hz ... 1 kHz velocity /
  displacement
- Resolution: 0.1 m/s2 / 0.1 yd/s2; 0.1 mm/s / 0.004 in/s ; 1 µm / 3.3814e-14 oz ;
  1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included

 

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VT 2700S

PCE-VT 2700S is a factory-calibrated (certificate included) portable digital battery-powered handheld vibration analyzer used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes. The PCE-VT 2700S comes with a special attachment to adapt the probe for handheld use.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz (in 10 kHz
  mode) acceleration; 10 Hz ... 1 kHz velocity / displacement
- Resolution: 0.1 m/s² / 0.1 yd/s²; 0.1 mm/s / 0.004 in/s ; 1 µm / 3.3814e-14 oz ;
  1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included

 

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VT 2700S

PCE-VT 2700S is a factory-calibrated (certificate included) portable digital battery-powered handheld vibration meter used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes. The PCE-VT 2700S comes with a special attachment to adapt the probe for handheld use.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz (in 10 kHz
  mode) acceleration; 10 Hz ... 1 kHz velocity / displacement
- Resolution: 0.1 m/s² / 0.1 yd/s²; 0.1 mm/s / 0.004 in/s ; 1 µm / 3.3814e-14 oz ;
  1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included 

 

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDD 10

The PCE-DDD 10 shore hardness tester and durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.  The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.


- Handheld device
- For Shore D measurements
- Single and Serial Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VT 2700

PCE-VT 2700 is a portable digital battery-powered HVAC meter used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes.  PCE-VT 2700 is one of many high-quality test instruments offered by PCE Instruments (PCE). PCE's vibration test instruments are manufacturer calibrated and includes an ISO calibration certificate. Commonly used to measure the vibration of parts, machinery, or other equipment, the PCE-VT 2700 vibration test instrument features peak hold functionality and shows acceleration, velocity, and displacement directly on its 4-digit LCD display, making it an especially handy inspection tool for maintenance staff and field personnel.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz (in 10 kHz
  mode) acceleration; 10 Hz ... 1 kHz velocity / displacement
- Resolution: 0.1 m/s² / 0.1 yd/s²; 0.1 mm/s / 0.004 in/s ; 1 µm / 3.3814e-14 oz ;
  1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included 

 

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VT 2700S

PCE-VT 2700S is a factory-calibrated (certificate included) portable digital battery-powered handheld HVAC meter used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes. The PCE-VT 2700S comes with a special attachment to adapt the probe for handheld use.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz (in 10 kHz
  mode) acceleration; 10 Hz ... 1 kHz velocity / displacement
- Resolution: 0.1 m/s² / 0.1 yd/s²; 0.1 mm/s / 0.004 in/s ; 1 µm / 3.3814e-14 oz ;
  1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included 

 

Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 200-S

The PCE-VE 200-S is an industrial inspection borescope camera or engine borescope for the non-destructive evaluation (NDE) of engines, machines and constructions. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head of this borescope camera features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 1 m / 3.28 ft cable length
- 180° image rotation


Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 200-S

PCE-VE 200-S is an industrial inspection camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 1 m / 3.28 ft cable length
- 180° image rotation


Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IT 120
The insulation tester PCE-IT 120 detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this PCE-IT 120 insulation tester offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ.

- DC test voltage: 250/500 / 1000V
- OLED display
- Automatic polarity display
- Automatic range selection
- PI and DAR test
- Degree of protection / standardization: IEC 1010-1, 700V CAT III
Manufacturer: PCE Instruments
US$ 525.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer