Order no.: PCE-PHD 1

The PCE-PHD 1 Salt Meter is a portable and effective measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the salt meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.


- Measuring range salinity: 0 ... 12% (weight percent)
- Automatic temperature compensation
- Sampling rate of 1 sec.
- SD card memory (16 GB max.)
- Interface: RS-232
- 3 point calibration
- Electrodes for pH and conductivity included

Manufacturer: PCE Instruments
US$ 508.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WB 20SD

The temperature data logger is used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data recording device is an ideal tool for evaluating heat stress risks in different work environments.


- Programmable WBGT alarm setting with audible and visual alerts
- Manual (push-button) or automatic (adjustable 1 ... 3600 sec) sampling
- SD card memory (1 ... 16 GB) allows for quick and easy data transfer to a PC

Manufacturer: PCE Instruments
US$ 508.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WB 20SD

PCE-WB 20SD is a data-logging thermo-hygrometer used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data-recording device is an ideal tool for evaluating heat stress risks in different work environments.


- Programmable WBGT alarm setting with audible and visual alerts
- Manual (push-button) or automatic (adjustable 1 ... 3600 sec) sampling
- SD card memory (1 ... 16 GB) allows for quick and easy data transfer to a PC

 

Manufacturer: PCE Instruments
US$ 508.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PHD 1

The PCE-PHD 1 Water Analysis Meter is a portable and effective measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the water analysis meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.


- Parameter: pH, Redox, Conductivity, TDS, Salt, Oxygen, Temperature
- Automatic temperature compensation
- Sampling rate of 1 sec.
- SD card memory (16 GB max.)
- Interface: RS-232
- 3 point calibration
- Electrodes for pH and conductivity included

Manufacturer: PCE Instruments
US$ 508.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FMW-T

The Absolute Moisture Meter FMW-T covers all your needs while measuring moisture contents in all types of wood and building materials. The Absolute Moisture Meter works without causing any damage to the material and it is mainly used to measure building walls.


- Test / Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement 

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 503.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FMW-T

The building moisture meter covers all your needs while measuring moisture contents in all types of wood and building materials. The building moisture meter works without causing any damage to the material and it is mainly used to measure building walls.


- Test / Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement 

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 503.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FMW-T

The Concrete Moisture Meter FMW-T covers all your needs while measuring moisture contents in all types of wood and building materials. The Concrete Moisture Meter works without causing any damage to the material and it is mainly used to measure building walls.


- Test / Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement 

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 503.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FMW-T

The Moisture Analyzer for Building Materials FMW-T covers all your needs while measuring moisture contents in all types of wood and building materials. The Moisture Analyzer for Building Materials works without causing any damage to the material and it is mainly used to measure building walls.


- Test / Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement 

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 503.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FMW-T

The Moisture Tester for Wood FMW-T covers all your needs while measuring moisture contents in all types of wood and building materials. The Moisture Tester for Wood works without causing any damage to the material and it is mainly used to measure building walls.


- Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement 

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 503.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FMW-T

The Timber Moisture Meter FMW-T covers all your needs while measuring moisture contents in all types of wood and building materials. The Timber Moisture Meter works without causing any damage to the material and it is mainly used to measure building walls.


- Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 503.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FMW-T

The Wood Moisture Meter FMW-T covers all your needs while measuring moisture contents in all types of wood and building materials. The Wood Moisture Meter works without causing any damage to the material and it is mainly used to measure building walls.


- Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 503.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VDL 16I
The accelerometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this accelerometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
US$ 501.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VDL 16I
The Air Quality Station from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this Air Quality Station is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
US$ 501.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VDL 16I
The climate data logger meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this climate data logger meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
US$ 501.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VDL 16I
The vibration meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
US$ 501.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VDL 16I
The data logger PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this data logger is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
US$ 501.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VDL 16I
The data logger for temperature and humidity from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this data logger is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
US$ 501.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-917-ICA

PCE-917 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 501.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-917-ICA

PCE-917 is a portable handheld digital HVAC Meter, gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 501.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-917-ICA

PCE-917 is a portable handheld digital differential pressure manometer, gauge, or meter used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 501.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer