Industrial Measurement Products and Solutions
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 529.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 529.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 529.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 529.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CWG 1

Compact air flow meter CWG1 for weather monitoring. Basic cup anemometer with 4 … 20 mA output.


- Output: 4 … 20 mA
- Measurement reading range: 0 … 50 m/s
- Accuracy: ± 0,5 m/s or 3 % v.M

Manufacturer: Adolf Thies GmbH & Co. KG
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-AQD 10-ICA
The Air Quality Station is used to measure air quality. The Air Quality Station measures carbon dioxide, temperature and humidity. The CO2 sensor from the Air Quality Station is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
- incl. ISO Calibration Certificate (only for CO2)
Manufacturer: PCE Instruments
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CWG 1

Compact wind sensor CWG1 for weather monitoring. Basic cup anemometer with 4 … 20 mA output.


- Output: 4 … 20 mA
- Measurement reading range: 0 … 50 m/s
- Accuracy: ± 0,5 m/s or 3 % v.M

 

Manufacturer: Adolf Thies GmbH & Co. KG
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-200

Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Battery operation
- Different sensor heads can be selected!

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-200

Ozone Meter AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Battery operation
- Different sensor heads can be selected!

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CP 30
The multi-parameter pH Meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH Meter. With this multi-parameter pH Meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg / l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:
- Alkalinity
- Chlorine
- Cyanuric acid
- pH
- Total hardness
- Calcium hardness
- Active oxygen
- Chlorine dioxide
- Bromine
- Ozone
- Hydrogen peroxide
- PHMB (polyhexanide)
- Urea
Manufacturer: PCE Instruments
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PHD 1-R

The redox meter PCE-PHD 1-R is a multifunction meter for checking water quality. The portable redox meter is very well suited for controlling the redox value in water.


- Redox: 1999 ... 0 ... 1999 mV
- Real-time data logger
- SD card memory (16 GB max.)
- RS-232 interface for online data transmission
- BNC connector
- Electrode for redox included

Manufacturer: PCE Instruments
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PHD 1-R

The redox meter PCE-PHD 1-R is a multifunction meter for checking water quality. The portable redox meter is very well suited for controlling the redox value in water.


- Redox: 1999 ... 0 ... 1999 mV
- Real-time data logger
- SD card memory (16 GB max.)
- RS-232 interface for online data transmission
- BNC connector
- Electrode for redox included

Manufacturer: PCE Instruments
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-228SF
The surface pH meter PCE-228SF is used to measure the pH on surfaces such as paper, cardboard, leather, textiles and skin. The special pH electrode of the pH meter is particularly flat and made of epoxy, which makes it particularly resistant to impact. The pH meter can also be used to measure very small sample volumes from 0.1 ml upwards. For this, a special measuring cuvette is supplied.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- pH meter for surfaces
Manufacturer: PCE Instruments
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CWG 1

Compact wind sensor CWG1 for weather monitoring. Basic cup anemometer with 4 … 20 mA output.


- Output: 4 … 20 mA
- Measurement reading range: 0 … 50 m/s
- Accuracy: ± 0,5 m/s or 3 % v.M

 

Manufacturer: Adolf Thies GmbH & Co. KG
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CWG 1

Compact wind speed meter CWG1 for weather monitoring. Basic cup wind speed meter with 4 … 20 mA output.


- Output: 4 … 20 mA
- Measurement reading range: 0 … 50 m/s
- Accuracy: ± 0,5 m/s or 3 % v.M

 

Manufacturer: Adolf Thies GmbH & Co. KG
US$ 528.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS11

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 524.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS11

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 524.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS11

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 524.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS11

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 524.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-BT 200

Affordable Benchtop Scale. It can be calibrated with  (200 g), weighing units can also be selected, with piece counting function.

 


- Weighing capacity: 210 g
- power or battery use
- Automatic calibration
- Removable stainless steel weighing plate

 

 

Manufacturer: PCE Instruments
US$ 521.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer