Order no.: PCE-PHD 1-R

The redox meter PCE-PHD 1-R is a multifunction meter for checking water quality. The portable redox meter is very well suited for controlling the redox value in water.


- Redox: 1999 ... 0 ... 1999 mV
- Real-time data logger
- SD card memory (16 GB max.)
- RS-232 interface for online data transmission
- BNC connector
- Electrode for redox included

Manufacturer: PCE Instruments
US$ 494.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-228SF
The surface pH meter PCE-228SF is used to measure the pH on surfaces such as paper, cardboard, leather, textiles and skin. The special pH electrode of the pH meter is particularly flat and made of epoxy, which makes it particularly resistant to impact. The pH meter can also be used to measure very small sample volumes from 0.1 ml upwards. For this, a special measuring cuvette is supplied.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- pH meter for surfaces
Manufacturer: PCE Instruments
US$ 494.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 494.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 494.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 494.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CWG 1

Compact wind sensor CWG1 for weather monitoring. Basic cup anemometer with 4 … 20 mA output.


- Output: 4 … 20 mA
- Measurement reading range: 0 … 50 m/s
- Accuracy: ± 0,5 m/s or 3 % v.M

 

Manufacturer: Adolf Thies GmbH & Co. KG
US$ 494.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CWG 1

Compact wind speed meter CWG1 for weather monitoring. Basic cup wind speed meter with 4 … 20 mA output.


- Output: 4 … 20 mA
- Measurement reading range: 0 … 50 m/s
- Accuracy: ± 0,5 m/s or 3 % v.M

 

Manufacturer: Adolf Thies GmbH & Co. KG
US$ 494.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 27FN

PCE-CT 27FN is a Car Measuring Device that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils 

 

Manufacturer: PCE Instruments
US$ 492.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 27FN

PCE-CT 27FN is a Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils 

 

Manufacturer: PCE Instruments
US$ 492.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 27FN

PCE-CT 27FN is a Paint Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils

 

Manufacturer: PCE Instruments
US$ 492.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 27FN

PCE-CT 27FN is a Surface Testing - Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ±(2 % + 2 µm) / ±(2 % + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils

 

Manufacturer: PCE Instruments
US$ 492.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 27FN

PCE-CT 27FN is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ±(2 % + 2 µm) / ±(2 % + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils 

 

Manufacturer: PCE Instruments
US$ 492.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 27FN

PCE-CT 27FN is a Thickness Test Instrument that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

 

- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ±(2 % + 2 µm) / ±(2 % + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils

Manufacturer: PCE Instruments
US$ 492.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS11

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 491.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS11

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 491.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS11

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 491.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VS11

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
US$ 491.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-BT 200

Affordable Benchtop Scale. It can be calibrated with  (200 g), weighing units can also be selected, with piece counting function.

 


- Weighing capacity: 210 g
- power or battery use
- Automatic calibration
- Removable stainless steel weighing plate

 

 

Manufacturer: PCE Instruments
US$ 488.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WNM 100
The PCE-WNM 100 brightness tester is used to measure the whiteness of flat surfaces or powders. In particular, the brightness tester can be used to measure the white of textile prints, dyes, building materials, cardboard and paper as well as plastics.

- Measuring range: 0 ... 120 
- Resolution: 0.1
- Repeat accuracy : < 0.5
- R457 nm LED illumination
- 45/0 measuring geometry
- For many surfaces and materials
Manufacturer: PCE Instruments
US$ 488.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MMK 1

The building moisture meter is designed for mobile use by technicians and assemblers. It not only measures the absolute moisture in construction materials or wood, but can also display data regarding air humidity and temperature.

- Self-test of building moisture meter
- Wood, board paper and construction material
- Battery display
- Wet-dry-indicator
- Temperature unit eligible between °C and °F
- Resistive Measuring

Manufacturer: PCE Instruments
US$ 488.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer