The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg/l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Total hardness
- Iron

The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Cyanuric acid
- Bromine
- Iron
- Iodine

The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- pH
- Urea
- Nitrite
- Nitrate
- Phosphate
- Ammonia
- Iron
- Copper
- Potassium

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

- Adjustable units: mg/l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Total hardness
- Iron

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Cyanuric acid
- Bromine
- Iron
- Iodine

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- pH
- Urea
- Nitrite
- Nitrate
- Phosphate
- Ammonia
- Iron
- Copper
- Potassium

The PCE-FM 500N force gage is a microprocessor controlled dynamometer with fast and accurate readout of tensile and compressive forces in N, Kg and lb. The display of the force gage is easily readable by the large numbers. The force gage is equipped with an internal load cell for tensile and compression tests.

- Measuring range: 5... 500 N / 1.1 ... 112 lbs
- Resolution: 0.1 N / 0.02 lbs
- Different shaped measuring adapters
- Evaluation via USB interface
- Device for mounting on test stands

The Ozone meter / base unit AQ-FM S900 is used to measure and control gas concentrations, and can communicate with a variety of hardware systems. The transmitter can also be used as switching relays with user-set values, as 4-20 mA output gas transmitter and it can communicate with a network via the RS485 interface. Changing sensor heads is quick and easy, no configuration changes required. Calibration certificate included.

- Analog Output: 4-20 mA (optional isolated), 10... 30V
- External control signal: Min Max. Alarm, control and diagnostics
- Power supply: 12V DC 1A supply is not supplied but required
- Interface: RS485

Attention! No AQ sensor head is included in the delivery, it must be ordered separately as an accessory!

 

The Ozone meter / base unit AQ-FM S900 is used to measure and control gas concentrations, and can communicate with a variety of hardware systems. The transmitter can also be used as switching relays with user-set values, as 4-20 mA output gas transmitter and it can communicate with a network via the RS485 interface. Changing sensor heads is quick and easy, no configuration changes required. Calibration certificate included.

- Analog Output: 4-20 mA (optional isolated), 10... 30V
- External control signal: Min Max. Alarm, control and diagnostics
- Power supply: 12V DC 1A supply is not supplied but required
- Interface: RS485

Attention! No AQ sensor head is included in the delivery, it must be ordered separately as an accessory!

 

PCE-288-R Redox Meter is a very easy to use meter to measure mV /pH / ºC. In the PC-228-R Redox Meter values can be directly stored in the SD memory card (Excel format) or can be directly transferred in real time to a PC or laptop by means of the RS-232 interface.

- Good quality at an affordable price
- SD memory card (1 ... 16 GB)
- Values are directly stored in Excel format in the SD memory card (any
  additional software is required)
- RS-232 interface for real time data transference

 

The PCE-288-R Water Analysis Meter or Redox Meter is a very easy to use meter to measure mV / pH / ºC. In the PCE-228-R Redox Meter, values can be directly stored in the SD memory card (Excel format) or can be directly transferred in real time to a PC or laptop by means of the RS-232 interface.

- Good quality at an affordable price
- SD memory card (1 ... 16 GB)
- Values are directly stored in Excel format in the SD memory card (any
  additional software is required)
- RS-232 interface for real-time data transfer

 

- Wind speed measuring range: 0.00 ... 30.00 m/s / 98 ft/s / 67 mph
- Temperature measuring range: -20 ... 60 °C / -4 ... 140 °F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm / 0.47"
- 390 mm / 15.4" telescopic pole
- Bluetooth 4.0 interface
- incl. ISO Calibration Certificate (wind speed function only)

- Wind speed measuring range: 0.00 ... 30.00 m/s / 98 ft/s / 67 mph
- Temperature measuring range: -20 ... 60 °C / -4 ... 140 °F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm / 0.47"
- 390 mm / 15.4" telescopic pole
- Bluetooth 4.0 interface
- incl. ISO Calibration Certificate (wind speed function only)

- Wind speed measuring range: 0.00 ... 30.00 m/s / 98 ft/s / 67 mph
- Temperature measuring range: -20 ... 60 °C / -4 ... 140 °F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm / 0.47"
- 390 mm / 15.4" telescopic pole
- Bluetooth 4.0 interface
- incl. ISO Calibration Certificate (wind speed function only)

- Wind speed measuring range: 0.00 ... 30.00 m/s / 98 ft/s / 67 mph
- Temperature measuring range: -20 ... 60 °C / -4 ... 140 °F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm / 0.47"
- 390 mm / 15.4" telescopic pole
- Bluetooth 4.0 interface
- incl. ISO Calibration Certificate (wind speed function only)