Voltmeter PCE-ITM 20
US$ 499.00
ex. VAT, ex. delivery costs
This Voltmeter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this Voltmeter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitancemeasurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000V, CAT IV 600V
  • Frequency measurement
Voltmeter PCE-ITM 20
US$ 499.00
ex. VAT, ex. delivery costs
This voltmeter combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this voltmeter is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitance measurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000 V, CAT IV 600 V
  • Frequency measurement
Water Analysis Meter PCE-228HTE-ICA incl. ISO Calibration Certificate
US$ 499.00
ex. VAT, ex. delivery costs
ISO Calibration

The Water Analysis Meter PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.


  • Measurement range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Accuracy: ± (0.02 pH + 2 digits)
  • Memory: flexible via SD card memory 1 … 16 GB
  • Interface: RS-232
  • Incl. special pH electrode: for temperatures to 100°C / 212°F
  • Incl. ISO Calibration Certificate

Air Flow Meter CWG 2
US$ 496.00
ex. VAT, ex. delivery costs

Air flow meter with 0 … 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 50 m/s
  • Output signal: 0 … 10 V
  • Mounting: Pipe mounting / mounting via PG screw connection
  • Heating: yes

Air Flow Meter CWG 2
US$ 496.00
ex. VAT, ex. delivery costs

Air flow meter with 0 … 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 50 m/s
  • Output signal: 0 … 10 V
  • Mounting: Pipe mounting / mounting via PG screw connection
  • Heating: yes

Air Velocity Meter CWG 2
US$ 496.00
ex. VAT, ex. delivery costs

Air velocity meter with 0 … 10 V output. Air velocity meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 50 m/s
  • Output signal: 0 … 10 V
  • Mounting: Pipe mounting / mounting via PG screw connection
  • Heating: yes

Anemometer CWG 2
US$ 496.00
ex. VAT, ex. delivery costs

Anemometer with 0 … 10 V output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 50 m/s
  • Output signal: 0 … 10 V
  • Mounting: Pipe mounting / mounting via PG screw connection
  • Heating: yes

Benchtop Scale PCE-SCS 60-ICA incl. ISO Calibration Certificate
US$ 496.00
ex. VAT, ex. delivery costs
ISO Calibration
The benchtop scale has a 300 x 400 mm stainless steel platform that can be removed for cleaning. Benchtop scale for flexible use, independent of the power supply.

  • Weighing range: 60 kg / 132 lb
  • Readability: 5 g / 0.17 oz
  • Taring range: over the full range
  • Piece counting
  • Settling time: adjustable
  • Weighing units: kg / lb
  • Platform size: 300 x 400 mm / 11.8 x 15.7"
  • Mains and battery operation
  •  incl. ISO Calibration Certificate
Checkweighing Scale PCE-EP 150P1
US$ 496.00
ex. VAT, ex. delivery costs

The robust checkweighing scale is a real all-arounder. The stand of the checkweighing scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


  • Weighing range: 60/150 kg
  • Readability: 10/20 g
  • P1 - weighing surface: 400 x 500 mm
  • Removable tripod
  • Calibratable

Checkweighing Scale PCE-EP 30P1
US$ 496.00
ex. VAT, ex. delivery costs

The robust checkweighing scale is perfect for all general weighing tasks. The stand of the checkweighing scale can be easily separated along with the tripod mount from the platform and possibly mounted on the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long. P1 is 400 x 500 mm size.


  • Weighing range: 15/30 kg
  • Readability: 2/5 g
  • P1 - weighing surface: 400 x 500 mm
  • Removable tripod
  • Calibrateable

Climate Meter CWG 2
US$ 496.00
ex. VAT, ex. delivery costs

Climate meter with 0 … 10 V output. Climate meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 50 m/s
  • Output signal: 0 … 10 V
  • Mounting: Pipe mounting / mounting via PG screw connection
  • Heating: yes

Compact Balance PCE-SCS 60-ICA incl. ISO Calibration Certificate
US$ 496.00
ex. VAT, ex. delivery costs
ISO Calibration
The compact balance has a 300 x 400 mm stainless steel platform that can be removed for cleaning. Compact balance for flexible use, independent of the power supply.

  • Weighing range: 60 kg / 132 lb
  • Readability: 5 g / 0.17 oz
  • Taring range: over the full range
  • Piece counting
  • Settling time: adjustable
  • Weighing units: kg / lb
  • Platform size: 300 x 400 mm / 11.8 x 15.7"
  • Mains and battery operation
  • incl. ISO Calibration Certificate
Counting Scale PCE-SCS 60-ICA incl. ISO Calibration Certificate
US$ 496.00
ex. VAT, ex. delivery costs
ISO Calibration
The counting scale has a 300 x 400 mm stainless steel platform that can be removed for cleaning. Counting scale for flexible use, independent of the power supply.

  • Weighing range: 60 kg / 132 lb
  • Readability: 5 g / 0.17 oz
  • Taring range: over the full range
  • Piece counting
  • Settling time: adjustable
  • Weighing units: kg / lb
  • Platform size: 300 x 400 mm / 11.8 x 15.7"
  • Mains and battery operation
  • incl. ISO Calibration Certificate
Counting Scales PCE-EP 150P1
US$ 496.00
ex. VAT, ex. delivery costs

The robust counting scales is a real all-arounder. The stand of the counting scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


  • Weighing range: 60/150 kg
  • Readability: 10/20 g
  • P1 - weighing surface: 400 x 500 mm
  • Removable tripod
  • Calibrateable
Environmental Meter CWG 2
US$ 496.00
ex. VAT, ex. delivery costs

Environmental meter with 0 … 10 V output. Environmental meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 50 m/s
  • Output signal: 0 … 10 V
  • Mounting: Pipe mounting / mounting via PG screw connection
  • Heating: yes

Environmental Tester CWG 2
US$ 496.00
ex. VAT, ex. delivery costs

Environmental tester with 0 … 10 V output. Environmental tester for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 50 m/s
  • Output signal: 0 … 10 V
  • Mounting: Pipe mounting / mounting via PG screw connection
  • Heating: yes

Industrial Scale PCE-EP 150P1
US$ 496.00
ex. VAT, ex. delivery costs

The robust industrial scale is a real all-arounder. The stand of the industrial scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


  • Weighing range: 60/150 kg
  • Readability: 10/20 g
  • P1 - weighing surface: 400 x 500 mm
  • Removable tripod
  • Calibrateable

Industrial Scale PCE-EP 30P1
US$ 496.00
ex. VAT, ex. delivery costs

The robust industrial scale is perfect for all general weighing tasks. The stand of the Laboratory Balance can be easily separated along with the tripod mount from the platform and possibly mounted on the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long. P1 is 400 x 500 mm size.


  • Weighing range: 15/30 kg
  • Readability: 2/5 g
  • P1 - weighing surface: 400 x 500 mm
  • Removable tripod
  • Calibratable