Semi-micro pH electrode PCE-PH-SME
US$ 459.00
ex. VAT, ex. delivery costs
Semi-micro pH electrode, suitable for measurement in a small container

  • pH electrode (refillable)
  • Measuring range: 0 ... 14 pH
  • Diameter: 6 mm
  • Temperature range: 0 ... 80 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application: Laboratory flasks, test tubes
Condition Monitoring Sound Level Meter PCE-SLT-TRM
US$ 458.00
ex. VAT, ex. delivery costs

The class 2 (type 2) condition monitoring sound level meter is a noise meter, sound pressure level (SPL), or decibel (dB) meter with an audible or visual alarm. Used for long-term measurement of occupational noise exposure limits, the condition monitoring sound level meter is an effective device across the industry spectrum. 


  • Class 2
  • Measuring range: 30 … 130 dB in 3 ranges
  • Resolution: 0.1 dB
  • Accuracy: ±1.5 dB
  • Frequency weighting: A
  • Time weighting: Fast
  • Output: 4 … 20 mA
  • IP 54 ingress protection rating on transmitter

Decibel Meter PCE-SLT-TRM
US$ 458.00
ex. VAT, ex. delivery costs

PCE-SLT-TRM is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. PCE-SLT-TRM is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.


  • Measuring range: 30 … 130 dB in 3 ranges
  • Resolution: 0.1 dB
  • Accuracy: ± 1.5 dB
  • IP 54 ingress protection rating on transmitter

Durometer PCE-DX-AS-ICA Shore A incl. ISO Calibration Certificate
US$ 458.00
ex. VAT, ex. delivery costs
ISO Calibration

Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


  • Force of pressure: 0 to 12.5 N
  • Penetrating body: 35º (according to Shore A)
  • Equipped with drag needle
  • Measurement range: 10 … 90  (pressure diminishes below 10 and above 90)
  • Margin of error: ± 1
  • Division of scale: 1
  • incl. ISO Calibration Certificate

Environmental Meter PCE-SLT-TRM
US$ 458.00
ex. VAT, ex. delivery costs

The environmental meter is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. The environmental meter is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.

  • Measuring range: 30 … 130 dB in 3 ranges
  • Resolution: 0.1 dB
  • Accuracy: ± 1.5 dB
  • IP 54 ingress protection rating on transmitter

Environmental Tester PCE-SLT-TRM
US$ 458.00
ex. VAT, ex. delivery costs

The environmental tester is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. The environmental tester is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.

  • Measuring range: 30 … 130 dB in 3 ranges
  • Resolution: 0.1 dB
  • Accuracy: ± 1.5 dB
  • IP 54 ingress protection rating on transmitter

Hardness Tester PCE-DX-AS-ICA Shore A incl. ISO Calibration Certificate
US$ 458.00
ex. VAT, ex. delivery costs
ISO Calibration

Mechanical shore hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


  • Force of pressure: 0 to 12.5 N
  • Penetrating body: 35º (according to Shore A)
  • Equipped with drag needle
  • Measurement range: 10 … 90  (pressure diminishes below 10 and above 90)
  • Margin of error: ± 1
  • Division of scale: 1
  • incl. ISO Calibration Certificate

NDT Tester PCE-DX-AS-ICA Shore A incl. ISO Calibration Certificate
US$ 458.00
ex. VAT, ex. delivery costs
ISO Calibration

Mechanical shore hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


  • Force of pressure: 0 to 12.5 N
  • Penetrating body: 35º (according to Shore A)
  • Equipped with drag needle
  • Measurement range: 10 … 90  (pressure diminishes below 10 and above 90)
  • Margin of error: ± 1
  • Division of scale: 1
  • incl. ISO Calibration Certificate

Noise Meter / Sound Meter PCE-SLT-TRM
US$ 458.00
ex. VAT, ex. delivery costs

PCE-SLT-TRM is a class II (type 2) sound meter, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. PCE-SLT-TRM is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.


  • Measuring range: 30 … 130 dB in 3 ranges
  • Resolution: 0.1 dB
  • Accuracy: ± 1.5 dB
  • IP 54 ingress protection rating on transmitter