The PCE-WNM 100 brightness tester is used to measure the whiteness of flat surfaces or powders. In particular, the brightness tester can be used to measure the white of textile prints, dyes, building materials, cardboard and paper as well as plastics.

- Measuring range: 0 ... 120 
- Resolution: 0.1
- Repeat accuracy : < 0.5
- R457 nm LED illumination
- 45/0 measuring geometry
- For many surfaces and materials

The PCE-WNM 100 whiteness meter is used to measure the whiteness of flat surfaces or powders. In particular, the whiteness meter can be used to measure the white of textile prints, dyes, building materials, cardboard and paper as well as plastics.

- Measuring range: 0 ... 120 
- Resolution: 0.1
- Repeat accuracy : < 0.5
- R457 nm LED illumination
- 45/0 measuring geometry
- For many surfaces and materials

PCE-P50 is a differential pressure manometer used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 689.5 kPa / 0 to 100 psi / 0 to 6.9 bar
- Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

PCE-P50 is a differential pressure meter used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 689.5 kPa / 0 to 100 psi / 0 to 6.9 bar
- Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

PCE-P50 is a HVAC meter used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 689.5 kPa / 0 to 100 psi / 0 to 6.9 bar
- Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

PCE-P50 is a pressure meter used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 689.5 kPa / 0 to 100 psi / 0 to 6.9 bar
- Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

The automotive tester PCE-VE 200SV3 is a nondestructive inspection camera. Thus, the automotive tester PCE-VE 200SV3 is the ideal instrument for diagnosis in hard-to-reach places. For example, the areas of mechanical engineering, sanitary and heating engineering, and the entire construction and construction industry are among the main areas of application of the automotive tester PCE-VE 200SV3.

- Camera head diameter 9 mm / 0.4 in
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Applications: Shampoo, pastes, paints, cosmetics
- Incl. ISO calibration certificate

PCE-CS 3000N is a digital rechargeable battery-powered heavy-duty crane scale that displays measurement values in kilograms (kg) or pounds (lbs). The crane scale comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.

- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control

The decibel meter PCE-318 detects the volume from a sound level of 26 dB (A). The decibel meter is ideal for measuring very low noises, for example, noises from computer fans. 

- Measuring range: 26...130 dB 
- Accuracy: ±1.5 dB
- Frequency: 31.5...8000 Hz
- A and C rating
- Fast and. slow time evaluation
- incl. ISO Calibration Certificate

Parameter:
- AC voltage, DC voltage
- AC / DC
- Resistance, conductivity
- Capacitance measurement, temperature
- Frequency measurement , duty cycle ratio
- Pulse width, continuity test
- Diode test

PCE-CS 3000N is a digital rechargeable battery-powered heavy-duty Dynamometer that displays measurement values in kilograms (kg) or pounds (lbs). The Dynamometer comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.

- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale 
- Includes hook, shackle, and remote control

 

Parameter:
- AC voltage, DC voltage
- AC / DC
- Resistance, conductivity
- Capacitance measurement, temperature
- Frequency measurement , duty cycle ratio
- Pulse width, continuity test
- Diode test

PCE-CS 3000N is a digital rechargeable battery-powered heavy-duty Force Gauge that displays measurement values in kilograms (kg) or pounds (lbs). The Force Gauge comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.

- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg / 1.1 lbs
- Tare range: 100 % full scale 
- Includes hook, shackle, and remote control

 

PCE-CS 3000N are digital rechargeable battery-powered heavy-duty hanging scales that display measurement values in kilograms (kg) or pounds (lbs). The hanging scales are delivered factory calibrated and include a hook, shackle and remote control. For an additional fee, the scales can be calibrated according to ISO standards.

- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg / 1.1 lbs
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control

PCE-CS 3000N is a digital rechargeable battery-powered heavy-duty Heavy Duty Scale that displays measurement values in kilograms (kg) or pounds (lbs). The Heavy Duty Scale comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.

- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale 
- Includes hook, shackle, and remote control

 

The HVAC meter PCE-VE 200SV3 is a nondestructive inspection camera. Thus, the HVAC meter PCE-VE 200SV3 is the ideal instrument for diagnosis in hard-to-reach places. For example, the areas of mechanical engineering, sanitary and heating engineering, and the entire construction and construction industry are among the main areas of application of the HVAC meter PCE-VE 200SV3.

- Camera head diameter 9 mm / 0.4 in
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

The industrial borescope PCE-VE 200SV3 is a nondestructive inspection camera. Thus, the industrial borescope PCE-VE 200SV3 is the ideal instrument for diagnosis in hard-to-reach places. For example, the areas of mechanical engineering, sanitary and heating engineering, and the entire construction and construction industry are among the main areas of application of the industrial borescope PCE-VE 200SV3.

- Camera head diameter 9 mm / 0.4 in
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

The inspection camera PCE-VE 200SV3 is a nondestructive inspection camera. Thus, the inspection camera PCE-VE 200SV3 is the ideal instrument for diagnosis in hard-to-reach places. For example, the areas of mechanical engineering, sanitary and heating engineering, and the entire construction and construction industry are among the main areas of application of the inspection camera PCE-VE 200SV3.

- Camera head diameter 9 mm / 0.4 in
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

Laboratory Scale PCE-BT 2000 to be used in Laboratories, production, quality controls, etc. Some important aspects of the accurate balance are both its design consisting on a flat surface and also it is very easy to use. It small size together with its high resolution in wider weighing ranges are other advantages of the Laboratory Scale PCE-BT 2000.

- Weighing capacity: 2100 g
- Readability: 0.01 g
- Powered by battery or power adapter
- Removable stainless steel weighing plate