Query results | PCE Instruments

US$ 409.00

ex. VAT, ex. delivery costs

The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

- Frequency range: 10 Hz ... 1 kHz

- Easy to handle and battery operated

- Standard probe: 10 mm

- including magnetic sensor

Weighing Hook PCE-HS 200N-ICA incl. ISO Calibration Certificate

US$ 409.00

ex. VAT, ex. delivery costs

The weighing hook is available with a measuring range of 0 ... 200 kg / 440.9 lbs. With an accuracy of ± 1% of the measuring range, the weighing hook is a precise measuring device. The LCD display of the weighing hook has a digit height of 22 mm and is backlit.

- Measuring range: 0 ... 200 kg / 0 ... 440.9 lbs
- Resolution: 50 g
- Accuracy: ± 1% of full scale
- Units: kg, lb, N
- Including shackles and hooks
- incl. ISO Calibration Certificate

HVAC Meter Gasman-FL "Flammable Gases"

US$ 406.84

ex. VAT, ex. delivery costs

This HVAC meter is designed as a cost-effective solution for applications where protection against a specific combustible or toxic gas is required. The Gasman HVAC meter is a single gas detector.

- Gas detector for flammable gases
- Range: 0...100%
- Alarm: 20%
- Memory for 5000 events
- Data logger for 900 hours of storage with 1 minute intervals
- Interface for calibrating, configuring and reading out the data
- Weight: 130g / 4.5 oz
- incl. charger

Clamp Meter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 405.00

ex. VAT, ex. delivery costs

With the Clamp Meter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Clamp Meter captures these currents and displays them on the display.

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate

Clamp on Tester PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 405.00

ex. VAT, ex. delivery costs

With the Clamp on Tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Clamp on Tester captures these currents and displays them on the display.

Current Clamp PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 405.00

ex. VAT, ex. delivery costs

With the Current Clamp it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Current Clamp captures these currents and displays them on the display.

Digital Multimeter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 405.00

ex. VAT, ex. delivery costs

With the Digital Multimeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The digital multimeter captures these currents and displays them on the display.

Electrical Tester PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 405.00

ex. VAT, ex. delivery costs

With the Electrical Tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Electrical Tester captures these currents and displays them on the display.

HVAC Meter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 405.00

ex. VAT, ex. delivery costs

With the HVAC Meter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The HVAC Meter captures these currents and displays them on the display.

Voltmeter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 405.00

ex. VAT, ex. delivery costs

With the Voltmeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Voltmeter captures these currents and displays them on the display.

Dissolved Oxygen Meter PCE-DOM 20

US$ 404.00

ex. VAT, ex. delivery costs

The Dissolved Oxygen Meter is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor

Environmental Meter PCE-DOM 20

US$ 404.00

ex. VAT, ex. delivery costs

The environmental meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the environmental meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor

Environmental Meter PCE-PDR 10

US$ 404.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 environmental meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental meter and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected.

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!

Environmental Tester PCE-DOM 20

US$ 404.00

ex. VAT, ex. delivery costs

The environmental tester PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental tester, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the environmental tester is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor

Environmental Tester PCE-PDR 10

US$ 404.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 environmental tester is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental tester and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected.

Food / Hygiene Meter PCE-DOM 20

US$ 404.00

ex. VAT, ex. delivery costs

The food / hygiene meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this food / hygiene meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the food / hygiene meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor

HVAC Meter PCE-PDR 10

US$ 404.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 HVAC meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this HVAC meter and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected.

Manometer PCE-PDR 10

US$ 404.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 Manometer is a pressure measurement gauge. Up to three pressure sensors can be connected to this manometer and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected.