HVAC Meter Gasman-FL "Flammable Gases"
US$ 406.84
ex. VAT, ex. delivery costs
This HVAC meter is designed as a cost-effective solution for applications where protection against a specific combustible or toxic gas is required. The Gasman HVAC meter is a single gas detector.

- Gas detector for flammable gases
- Range: 0...100%
- Alarm: 20%
- Memory for 5000 events
- Data logger for 900 hours of storage with 1 minute intervals
- Interface for calibrating, configuring and reading out the data
- Weight: 130g / 4.5 oz
- incl. charger
Clamp Meter PCE-LCT 1-ICA incl. ISO Calibration Certificate
US$ 405.00
ex. VAT, ex. delivery costs
ISO Calibration
With the Clamp Meter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Clamp Meter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Clamp on Tester PCE-LCT 1-ICA incl. ISO Calibration Certificate
US$ 405.00
ex. VAT, ex. delivery costs
ISO Calibration
With the Clamp on Tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Clamp on Tester captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Current Clamp PCE-LCT 1-ICA incl. ISO Calibration Certificate
US$ 405.00
ex. VAT, ex. delivery costs
ISO Calibration
With the Current Clamp it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Current Clamp captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Digital Multimeter PCE-LCT 1-ICA incl. ISO Calibration Certificate
US$ 405.00
ex. VAT, ex. delivery costs
ISO Calibration
With the Digital Multimeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The digital multimeter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Electrical Tester PCE-LCT 1-ICA incl. ISO Calibration Certificate
US$ 405.00
ex. VAT, ex. delivery costs
ISO Calibration
With the Electrical Tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Electrical Tester captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
HVAC Meter PCE-LCT 1-ICA incl. ISO Calibration Certificate
US$ 405.00
ex. VAT, ex. delivery costs
ISO Calibration
With the HVAC Meter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The HVAC Meter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Voltmeter PCE-LCT 1-ICA incl. ISO Calibration Certificate
US$ 405.00
ex. VAT, ex. delivery costs
ISO Calibration
With the Voltmeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Voltmeter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Dissolved Oxygen Meter PCE-DOM 20
US$ 404.00
ex. VAT, ex. delivery costs
The Dissolved Oxygen Meter is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Environmental Meter PCE-DOM 20
US$ 404.00
ex. VAT, ex. delivery costs
The environmental meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the environmental meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Environmental Meter PCE-PDR 10
US$ 404.00
ex. VAT, ex. delivery costs
The PCE-PDR 10 environmental meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental meter and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Environmental Tester PCE-DOM 20
US$ 404.00
ex. VAT, ex. delivery costs
The environmental tester PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental tester, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the environmental tester is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Environmental Tester PCE-PDR 10
US$ 404.00
ex. VAT, ex. delivery costs
The PCE-PDR 10 environmental tester is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental tester and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Food / Hygiene Meter PCE-DOM 20
US$ 404.00
ex. VAT, ex. delivery costs
The food / hygiene meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this food / hygiene meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the food / hygiene meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
HVAC Meter PCE-PDR 10
US$ 404.00
ex. VAT, ex. delivery costs
The PCE-PDR 10 HVAC meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this HVAC meter and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Manometer PCE-PDR 10
US$ 404.00
ex. VAT, ex. delivery costs
The PCE-PDR 10 Manometer is a pressure measurement gauge. Up to three pressure sensors can be connected to this manometer and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Oxygen Meter PCE-DOM 20
US$ 404.00
ex. VAT, ex. delivery costs
The oxygen meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Pressure Data Logger PCE-PDR 10
US$ 404.00
ex. VAT, ex. delivery costs
The PCE-PDR 10 pressure data logger is a pressure measurement gauge. Up to three pressure sensors can be connected to this pressure data logger and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!