Infrared thermometer for temperatures up to + 500 °C. The measured data can be stored and snet to a computer later on, but the main significant feature of this infrared thermometer is the built-in printer. This makes the test instrument very attractive for use in food applications. As all test equipment, this infrared thermometer is delivered manufacturer calibrated and can additionally be certified to ISO.

- Temperature range: -40 to 500 °C / -40 ... 932 °F
- Resolution: 0.1 °C / 0.18 °F
- Accuracy: ±2 % of reading or ±2 °C / 3.6 °F
- Optical resolution: 8:1
- Emissivity: 0.3 to 1.0 (adjustable)
- Interface: RS-232
- Display: LCD

The PCE-VE 200SV1 inspection camera is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 inspection camera is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction and construction industry are among the main applications of the inspection camera PCE-VE 200SV1.

- Camera head diameter 9 mm / 0.4 in
- Cable length: 1 m / 3.3 ft 
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

The PCE-JR-911 temperature meter with Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This temperature meter comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option.

- Temperature range: -40 to 500°C / -40 ... 932°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ±2% of reading or ±2°C / 3.6°F
- Optical resolution: 8:1
- Emissivity: 0.3 to 1.0 (adjustable)
- Interface: RS-232
- Display: LCD

 

The PCE-JR-911 Non-Contact Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Non-Contact Thermometer comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option.

- Temperature range: -40 to 500°C / -40 ... 932°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ±2% of reading or ±2°C / 3.6°F
- Optical resolution: 8:1
- Emissivity: 0.3 to 1.0 (adjustable)
- Interface: RS-232
- Display: LCD

 

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity

The PCE-VE 200SV1 videoscope is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 videoscope is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction industry are among the main applications of the videoscope camera PCE-VE 200SV1.

 

- Camera head diameter: 9 mm / 0.4 in
- Cable length: 1 m / 3.3 ft 
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

PCE-CS 300 is a digital, battery-powered Crane Scale for indoor use. The rugged design of the Crane Scale accommodates applications in rough industrial conditions as well as in fields such as food and hygiene.

- Maximum capacity: 300 kg / 661.39 lb
- Readability: 0.05 kg / 0.11 lbs
- TARE: Full range
- Power off screen reminder after 30 minutes of inactivity
- incl. ISO Calibration Certificate

PCE-CS 300 is a digital, battery-powered dynamometer for indoor use. The rugged design of the dynamometer accommodates applications in rough industrial conditions as well as in fields such as food and hygiene.

- Maximum capacity: 300 kg / 661.39 lb
- Readability: 0.05 kg / 0.11 lbs
- TARE: Full range
- Power off screen reminder after 30 minutes of inactivity
- incl. ISO Calibration Certificate

PCE-CS 300 is a digital, battery-powered Force Gauge for indoor use. The rugged design of the Force Gauge accommodates applications in rough industrial conditions as well as in fields such as food and hygiene.

- Maximum capacity: 300 kg / 661.39 lb
- Readability: 0.05 kg / 0.11 lbs
- TARE: Full range
- Power off screen reminder after 30 minutes of inactivity
- incl. ISO Calibration Certificate

PCE-CS 300 are digital, battery-powered Hanging Scales for indoor use. The rugged design of the Hanging Scales accommodates applications in rough industrial conditions as well as in fields such as food and hygiene.

- Maximum capacity: 300 kg / 661.39 lb
- Readability: 0.05 kg / 0.11 lbs
- TARE: Full range
- Power off screen reminder after 30 minutes of inactivity
- Incl. ISO calibration certificate

PCE-CS 300 is a digital, battery-powered Weighing Hook or Hanging Scale for indoor use. The rugged design of the Hanging Scale accommodates applications in rough industrial conditions as well as in fields such as food and hygiene.

- Maximum capacity: 300 kg / 661.39 lb
- Readability: 0.05 kg / 0.11 lbs
- TARE: Full range
- Power off screen reminder after 30 minutes of inactivity
- Incl. ISO calibration certificate

The one phase power meter PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.

- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus 

 

Note: This item must be configured before ordering!

The power display PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power meter PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power indicator can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.

- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus 

 

Note: This item must be configured before ordering!

The power indicator PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.

- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus 

 

Note: This item must be configured before ordering!

The power meter PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.

- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus 

 

Note: This item must be configured before ordering!

The three phase power meter PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.

- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus 

 

Note: This item must be configured before ordering!

With this Automotive Tester, layer thicknesses on metallic surfaces can be reliably determined. The Automotive Tester has a measuring range of 1500 µm. This means that the Automotive Tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

With this Coating Thickness Gauge, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Gauge has a measuring range of 1500 µm. This means that the Coating Thickness Gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

PCE-CT 65 is a coating thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.

- Measuring range of 0 ... 1350 µm / 0 ... 53 mils
- Accuracy of ±2.5 % ±2 µm for 0 ... 1000 µm / ±3.5 % for 1000 µm ... 1350 µm / ±2 % ±0.08 mils for 0 ... 39.3 mils / ±3.5 % for 39.3 mils ... 53.1 mils
- Saves up to 1500 measurements to memory
- Incl. ISO Calibration Certificate

With this Coating Thickness Measuring Device, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Measuring Device has a measuring range of 1500 µm. This means that the Coating Thickness Measuring Device is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values