The humidity detector PCE-780A is a dual-function instrument used to measure both temperature and humidity. The dew point, which is calculated by the PCE-780, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the PCE-780 emits a warning tone and displays either a LOW or a HIGH alarm.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Incl. ISO Calibration Certificate

The hygrometer PCE-780A is a dual-function instrument used to measure both temperature and humidity. The dew point, which is calculated by the PCE-780, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the PCE-780 emits a warning tone and displays either a LOW or a HIGH alarm.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Incl. ISO Calibration Certificate

The pyrometer PCE-780A is a dual-function instrument used to measure both temperature and humidity. The dew point, which is calculated by the PCE-780, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the PCE-780 emits a warning tone and displays either a LOW or a HIGH alarm.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Incl. ISO Calibration Certificate

The thermometer PCE-780A is a dual-function instrument used to measure both temperature and humidity. The dew point, which is calculated by the PCE-780, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the PCE-780 emits a warning tone and displays either a LOW or a HIGH alarm.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Incl. ISO Calibration Certificate

The wall moisture meter is a dual-function instrument used to measure both temperature and humidity. The dew point, which is calculated by the wall moisture meter, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the wall moisture meter emits a warning tone and displays either a LOW or a HIGH alarm.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Incl. ISO Calibration Certificate

The condition monitoring sound level meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The condition monitoring sound level meter has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The data logger with USB interface is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The data logger with USB interface has a logger function which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The data logging sound level meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The sound level meter has a logger function which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The decibel meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The decibel meter has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

PCE-910 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

PCE-910 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

PCE-910 is a portable handheld digital differential pressure vacuum gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

The digital thermometer is suitable for private and industrial use because of its price-performance ratio. A digital infrared thermometer is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

- Optical resolution 30:1
- Measuring range of -50 ... 1000 °C / -58 ... 1832 °F
- Maximum value display
- Adjustable emissivity
- incl. ISO Calibration Certificate

The environmental meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The environmental meter has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The environmental tester is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The environmental tester has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The HVAC meter is suitable for private and industrial use because of its price-performance ratio. An infrared HVAC meter is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

- Optical resolution 30:1
- Measuring range of -50 ... 1000 °C / -58 ... 1832 °F
- Maximum value display
- Adjustable emissivity
- incl. ISO Calibration Certificate

PCE-910 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory