Order no.: PCE-LCT 3
The voltmeter is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the voltmeter.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 3
With the voltmeter AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the voltmeter. 

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PH 23
The water analysis meter PCE-PH 23 is used for rapid fluid analysis. The water analysis meter offers the possibility of determining the temperature and the pH value. The operation of the water analysis meter PCE-PH 23 is carried out via the four front-mounted buttons.

- Measuring range pH measurement: 0.00 ... 14.00 pH
- Resolution pH measurement: 0.01 pH
- Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
- Graphic display
- 1-, 2- or 3-point calibration
- Four front panel buttons
- Memory (Save & Recall)
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PHC 10
The water analysis meter PCE-PHC 10 measures and regulates the pH of various substances and is able to influence the pH value. The water analysis meter PCE-PHC 10 is a classic 2-point controller, depending on the application, the controller can be used to influence the liquid in the direction of alkaline or acidic. 

- Measuring range: 0 ... 14 pH
- Measuring range: 0 ... 65°C / 32 ... 149°F
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating ...
- Sensors selectable
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-423

The PCE-423 Wind measurer with thermal sensor is highlighted by its good relation between price and quality. The PCE-423 Wind measurer has a high resolution to be used for different applications. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Kind of sensor: Hot wire
- External
- Memory: No
- Interface: USB
- Measurement range: 0.1 ... 25.0 m/s, 0.2 ...55.8 mph
- Resolution: 0.01 m/s, 0.1 mph

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-423

The PCE-423 Wind speed meter with thermal sensor is highlighted by its good relation between price and quality. The PCE-423 Wind speed meter has a high resolution to be used for different applications. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Kind of sensor: Hot wire
- External
- Memory: No
- Interface: USB
- Measurement range: 0.1 ... 25.0 m/s, 0.2 ...55.8 mph
- Resolution: 0.01 m/s, 0.1 mph

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LRF 600

PCE-LRF 600 is a metric-only rangefinding distance meter that not only measures distance, but also determines the speed of moving objects. Ideal for hunting, shooting, golfing and more, these compact laser rangefinding binoculars make great gifts for sports and outdoor enthusiasts.


- Distance measurement range: 6 ... 800 m
- Distance measurement accuracy: ±1 m; ± 0.2%
- Speed measurement range: 0 ... 300 km/h
- Speed measurement accuracy: ±1 km/h
- Measurement resolution: 1 m or 1 km/h

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RCM 15
The air humidity meter PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the air humidity meter measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1.999 mg / m³
- TVOC: 0 ... 9.999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RCM 15
The air quality meter PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the air quality meter measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1.999 mg / m³
- TVOC: 0 ... 9.999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RCM 15
The Air Quality Station  is specially designed to monitor the quality of indoor air. Among other things, the Air Quality Station measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1.999 mg / m³
- TVOC: 0 ... 9.999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HVAC 3S
The climate meter PCE-HVAC 3S is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the climate meter also determines the dew point and wet bulb temperature in °C and °F.

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HVAC 3S
The dew point thermometer PCE-HVAC 3S is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the dew point thermometer also determines the dew point and wet bulb temperature in °C and °F.

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DOM 10
The Dissolved Oxygen Meter is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RCM 15
The Dust Monitor PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the Dust Monitor measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1.999 mg / m³
- TVOC: 0 ... 9.999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RCM 15
The dust particle measuring device PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the dust particle measuring device the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1.999 mg / m³
- TVOC: 0 ... 9.999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DOM 10
The environmental meter PCE-DOM 10 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the environmental meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HVAC 3S
The environmental meter PCE-HVAC 3S is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the environmental meter also determines the dew point and wet bulb temperature in °C and °F.

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RCM 15
The environmental meter PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the environmental meter measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

 

Measured quantity:
- Formaldehyde: 0 ... 1.999 mg / m³
- TVOC: 0 ... 9.999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function

Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DOM 10
The environmental tester PCE-DOM 10 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental tester, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the environmental tester is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HVAC 3S
The environmental tester PCE-HVAC 3S is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the environmental tester also determines the dew point and wet bulb temperature in °C and °F.

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer