I/O Module PCE-S4AI
US$ 269.90
ex. VAT, ex. delivery costs

The I/O module PCE-SM4AI has 4 analog inputs for process signals, thermometers etc. All inputs from the I/O module are individually programmable. The I/O module is used to provide analog measurement signals in a Modbus network.

  • 4 analog inputs
  • Modbus RTU slave
  • 2 programmable alarm outputs
  • USB interface for programming

1-Phase-Power Meter PCE-N30P-1
US$ 269.00
ex. VAT, ex. delivery costs
Power Meter with one phase measurement for all parameters: voltage, current, etc.
Panel Meter PCE-N30P
US$ 269.00
ex. VAT, ex. delivery costs
The panel meter can determine the most important system parameters of a single-phase network. Based on the current and voltage, the panel meter calculates the apparent, active and reactive power, as well as the phase difference angle and the power factor. The panel meter can also determine the average power for a 15 minute period and the average voltage for a 10 minute period.

  • Input: 0.02…6 A / 0…480 V / 45.00…100.00 Hz
  • Accuracy: 0.2 %
  • IP65 protected front
  • two alarm outputs

Automotive Tester PCE-CM 5-ICA incl. ISO Calibration Certificate
US$ 268.00
ex. VAT, ex. delivery costs
ISO Calibration

The automotive tester is a multimeter with a multitude of different functions. Current measurements up to 200 A AC can be carried out with the current clamp without contact. This current range of the automotive tester covers a large range of current measurements.

Measurement function:

  • AC current
  • DC current
  • DC voltage
  • AC voltage
  • LowZ AC/DC
  • Resistance
  • Continuity test
  • Diode test
  • Capacitances
  • Temperature (type K)
  • Frequency (with current clamp)
  • Frequency (with voltage measurement)
  • Frequency (direct measurement)
  • Duty cycle
  • incl. ISO Calibration Certificate

Car Measuring Device PCE-CM 5-ICA incl. ISO Calibration Certificate
US$ 268.00
ex. VAT, ex. delivery costs
ISO Calibration
The car measuring device is a multimeter with a multitude of different functions. Current measurements up to 200 A AC can be carried out with the car measuring device without contact. This current range of the car measuring device covers a large range of current measurements.

Measurement function:
  • AC current
  • DC current
  • DC voltage
  • AC voltage
  • LowZ AC/DC
  • Resistance
  • Continuity test
  • Diode test
  • Capacitances
  • Temperature (type K)
  • Frequency (with current clamp)
  • Frequency (with voltage measurement)
  • Frequency (direct measurement)
  • Duty cycle
  • incl. ISO Calibration Certificate
Clamp Meter PCE-CM 5-ICA incl. ISO Calibration Certificate
US$ 268.00
ex. VAT, ex. delivery costs
ISO Calibration

The clamp meter is a multimeter with a multitude of different functions. Current measurements up to 200 A AC can be carried out with the current clamp without contact. This current range of the clamp meter covers a large range of current measurements.

Measurement function:

  • AC current
  • DC current
  • DC voltage
  • AC voltage
  • LowZ AC/DC
  • Resistance
  • Continuity test
  • Diode test
  • Capacitances
  • Temperature (type K)
  • Frequency (with current clamp)
  • Frequency (with voltage measurement)
  • Frequency (direct measurement)
  • Duty cycle
  • incl. ISO Calibration Certificate

Clamp on Tester PCE-CM 5-ICA incl. ISO Calibration Certificate
US$ 268.00
ex. VAT, ex. delivery costs
ISO Calibration

The clamp on tester is a multimeter with a multitude of different functions. Current measurements up to 200 A AC can be carried out with the current clamp without contact. This current range of the clamp on tester covers a large range of current measurements.

Measurement function:

  • AC current
  • DC current
  • DC voltage
  • AC voltage
  • LowZ AC/DC
  • Resistance
  • Continuity test
  • Diode test
  • Capacitances
  • Temperature (type K)
  • Frequency (with current clamp)
  • Frequency (with voltage measurement)
  • Frequency (direct measurement)
  • Duty cycle
  • incl. ISO Calibration Certificate

Condition Monitoring Rotation Meter PCE-T236
US$ 268.00
ex. VAT, ex. delivery costs

PCE-T236 is a digital handheld tachometer or rotation meter for both contact and non-contact measurement. This condition monitoring tachometer measures rotation speed as well as linear or surface speed, displaying units in rpm, m/min or ft/min. A unique feature of this tachometer is that the orientation of the 5-digit LCD screen automatically rotates 180° to accommodate either contact or non-contact measurement.


  • Optical laser measurement range: 5 … 99999 rpm
  • Contact measurement range: 0.05 … 19999 rpm
  • Accuracy: Less than 60000 rpm = ±0.05% fs , Greater than 60000 rpm = ±0.15%  fs

Current Clamp PCE-CM 5-ICA incl. ISO Calibration Certificate
US$ 268.00
ex. VAT, ex. delivery costs
ISO Calibration

The current clamp is a multimeter with a multitude of different functions. Current measurements up to 200 A AC can be carried out with the current clamp without contact. This current range of the current clamp covers a large range of current measurements.

Measurement function:

  • AC current
  • DC current
  • DC voltage
  • AC voltage
  • LowZ AC/DC
  • Resistance
  • Continuity test
  • Diode test
  • Capacitances
  • Temperature (type K)
  • Frequency (with current clamp)
  • Frequency (with voltage measurement)
  • Frequency (direct measurement)
  • Duty cycle
  • incl. ISO Calibration Certificate