Environmental Tester PCE-WS V
US$ 258.00
ex. VAT, ex. delivery costs
No-Shopping
The Environmental Tester impresses with its compact design and various output signals. The Environmental Tester can be used for applications in warning technology, building automation and home technology.

  • Measuring range:  0.8 m / s … 50 m / s
  • Measurement from: ≤0.8 m / s
  • Output: 0 … 10 V
  • IP 65 protection 
  • mA, V, pulse or Modbus output
Flow Meter PCE-WS V
US$ 258.00
ex. VAT, ex. delivery costs
No-Shopping
The Flow Meter impresses with its compact design and various output signals. The Flow Meter can be used for applications in warning technology, building automation and home technology. 

  • Measuring range:  0.8 m / s … 50 m / s
  • Measurement from: ≤0.8 m / s
  • Output: 0 … 10 V
  • IP 65 protection 
  • mA, V, pulse or Modbus output
Weather Station PCE-WS V
US$ 258.00
ex. VAT, ex. delivery costs
No-Shopping
The Weather Station impresses with its compact design and various output signals. The Weather Station can be used for applications in warning technology, building automation and home technology. 

  • Measuring range:  0.8 m / s … 50 m / s
  • Measurement from: ≤0.8 m / s
  • Output: 0 … 10 V
  • IP 65 protection 
  • mA, V, pulse or Modbus output
Wind Measurement Device PCE-WS V
US$ 258.00
ex. VAT, ex. delivery costs
No-Shopping
The Wind Measurement Device impresses with its compact design and various output signals. The Wind Measurement Device can be used for applications in warning technology, building automation and home technology. 

  • Measuring range:  0.8 m / s … 50 m / s
  • Measurement from: ≤0.8 m / s
  • Output: 0 … 10 V
  • IP 65 protection 
  • mA, V, pulse or Modbus output
Wind Speed Meter / Wind Speed Sensor PCE-WS V
US$ 258.00
ex. VAT, ex. delivery costs
No-Shopping
The Wind Speed Meter / Wind Speed Sensor impresses with its compact design and various output signals. The Wind Speed Meter can be used for applications in warning technology, building automation and home technology. 

  • Measuring range:  0.8 m / s … 50 m / s
  • Measurement from: ≤0.8 m / s
  • Output:  0 … 10 V
  • IP 65 protection 
  • mA, V, pulse or Modbus output
Clamp Meter PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose clamp meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

  • Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
  • Internal memory: Stores up to 99 measurement values
  • Includes USB cable and PC software
  • Three-phase power measurement
  • True RMS

Clamp-on Tester PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose clamp-on tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

  • Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
  • Internal memory: Stores up to 99 measurement values
  • Includes USB cable and PC software
  • Three-phase power measurement
  • True RMS

Conductivity Meter PCE-PH 30
US$ 257.00
ex. VAT, ex. delivery costs
The conductivity meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable conductivity meter PCE-PH 30 is used to control pH and conductivity.

  • 6 in 1 pH tester
  • Measuring range: 0 … 2000 μS, 2 … 20 mS
  • 3 point pH calibration
  • Exchangeable electrodes
  • Automatic electrode detection
Current Clamp PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose current clamp or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

  • Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
  • Internal memory: Stores up to 99 measurement values
  • Includes USB cable and PC software
  • Three-phase power measurement
  • True RMS

Digital Multimeter PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose digital multimeter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

  • Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
  • Internal memory: Stores up to 99 measurement values
  • Includes USB cable and PC software
  • Three-phase power measurement
  • True RMS

Electrical Tester PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose electrical tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

  • Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
  • Internal memory: Stores up to 99 measurement values
  • Includes USB cable and PC software
  • Three-phase power measurement
  • True RMS

Environmental Meter PCE-PH 30
US$ 257.00
ex. VAT, ex. delivery costs
The environmental meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental meter PCE-PH 30 is used to control pH and conductivity.

  • 6 in 1 pH tester
  • Measuring range: 0 … 2000 μS, 2 … 20 mS
  • 3 point pH calibration
  • Exchangeable electrodes
  • Automatic electrode detection
Environmental Meter PCE-PH20-ICA incl. ISO calibration certificate
US$ 257.00
ex. VAT, ex. delivery costs
ISO Calibration
The environmental meter was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.


  • Measuring range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Waterproof (IP 67)
  • Data-Hold function
  • Calibration: automatic, pH 4, 7 or 10
  • Aqueous media
  • Incl. ISO calibration certificate

Environmental Tester PCE-PH 30
US$ 257.00
ex. VAT, ex. delivery costs
The environmental tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental tester PCE-PH 30 is used to control pH and conductivity.

  • 6 in 1 pH tester
  • Measuring range: 0 … 2000 μS, 2 … 20 mS
  • 3 point pH calibration
  • Exchangeable electrodes
  • Automatic electrode detection
Environmental Tester PCE-PH20-ICA incl. ISO calibration certificate
US$ 257.00
ex. VAT, ex. delivery costs
ISO Calibration
The Environmental Tester PCE-PH20-ICA was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.


  • Measuring range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Waterproof (IP 67)
  • Data-Hold function
  • Calibration: automatic, pH 4, 7 or 10
  • Aqueous media
  • Incl. ISO calibration certificate

HVAC Meter PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose HVAC meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

  • Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
  • Internal memory: Stores up to 99 measurement values
  • Includes USB cable and PC software
  • Three-phase power measurement
  • True RMS

pH Meter PCE-PH 30
US$ 257.00
ex. VAT, ex. delivery costs
The pH meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable pH meter PCE-PH 30 is used to control pH and conductivity.

  • 6 in 1 pH tester
  • Measuring range: 0 … 2000 μS, 2 … 20 mS
  • 3 point pH calibration
  • Exchangeable electrodes
  • Automatic electrode detection
pH Meter PCE-PH20-ICA incl. ISO calibration certificate
US$ 257.00
ex. VAT, ex. delivery costs
ISO Calibration
The pH meter was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.


  • Measuring range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Waterproof (IP 67)
  • Data-Hold function
  • Calibration: automatic, pH 4, 7 or 10
  • Aqueous media
  • Incl. ISO calibration certificate