Industrial Measurement Products and Solutions
Order no.: MCW09T12-1

The MCW09T12 stainless steel Crane Scales are designed to be sturdy and reliable, weighing goods up to 12000 kg indoors or outdoors. The Crane Scales, with a large 40 mm DOT LED display, allow for maximum visibility from all angles and in any lighting condition, including direct sunlight. The Crane Scales are IP67 rated.


- Capacity [Max]: 12000 kg / 26455 lbs
- Readability [d]: 5 kg / 11 lbs 

 

Manufacturer: Dini Argeo GmbH
US$ 2,596.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: MCW09T12-1

The MCW09T12 stainless steel Force Gauge is designed to be sturdy and reliable, weighing goods up to 12000 kg indoors or outdoors. The Force Gauge, with a large 40 mm DOT LED display, allows for maximum visibility from all angles and in any lighting condition, including direct sunlight. The Force Gauge is IP67 rated.


- Capacity [Max]: 12000 kg / 26455 lbs
- Readability [d]: 5 kg / 11 lbs

 

Manufacturer: Dini Argeo GmbH
US$ 2,596.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: MCW09T12-1

The MCW09T12 stainless steel hanging scales are designed to be sturdy and reliable, weighing goods up to 12000 kg indoors or outdoors. The hanging scales, with a large 40 mm DOT LED display, allow for maximum visibility from all angles and in any lighting condition, including direct sunlight. The hanging scales are IP67 rated.


- Capacity [Max]: 12000 kg / 26455 lbs
- Readability [d]: 5 kg / 11 lbs

Manufacturer: Dini Argeo GmbH
US$ 2,596.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 33US
The dust measuring device PCE-PQC 33US is the most advanced dust measuring device on the market. This dust measuring device PCE-PQC 33US stores up to 45,000 measured values ​​with time stamp.

- Wall Mount Particle Counter
- 6 channel measuring range 0.5(fixed) 0.6-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921


Manufacturer: PCE Instruments
US$ 2,595.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 33US
The dust monitor PCE-PQC 33US is the most advanced dust monitor on the market. This dust monitorPCE-PQC 33US stores up to 45,000 measured values ​​with time stamp.

- Wall Mount Particle Counter
- 6 channel measuring range 0.5(fixed) 0.6-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921


Manufacturer: PCE Instruments
US$ 2,595.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 33US
The particle counter PCE-PQC 33US is the most advanced particle counter on the market. This particle counter PCE-PQC 33US stores up to 45,000 measured values ​​with time stamp.

- Wall Mount Particle Counter
- 6 channel measuring range 0.5(fixed) 0.6-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921


Manufacturer: PCE Instruments
US$ 2,595.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Force Gauge Quick Balance
The Force Gauge can be placed on a cable, measure its tension and removed in seconds!
The Force Gauge can be employed in many industries for the balancing of multiple line installations. Typical applications include elevators, tower and stack guy wire rope and crane rigging sets.

- Measuring range: 4.500 kg / 45.000 N / 10.000 lb
- Resolution: 5 kg / 50 N / 10 lb
- Display Type: Digital
- Sensor: Internal
- Calibratable
Manufacturer: Dillon Force Measurement Equipment
US$ 2,568.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Easyloc

This cable locating device is capable of finding underground cables and pipes laid to a depth of 7m, and determining their laying depth. Transmitter and receiver included.


- Frequency ranges: 15 kHz ... 23 kHz
- Resolution: 0.1 m
- Accuracy (with undisturbed signal): ± 10% (up to 2 m) 

 

Manufacturer: Seba Dynatronic
US$ 2,539.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-ET 5000
The earth tester is a versatile ohmmeter. With this earth tester a variety of resistance measurements can be performed. Thus, with the earth tester, the possibility exists to perform a normal resistance measurement of 2- or 4-pole application.

- Interference currents, interference voltages, frequencies
- Direct and indirect resistance measurement
- Data memory for later analysis on the PC
- Mobile use thanks to battery and batteries
Manufacturer: PCE Instruments
US$ 2,530.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 2300-ICA
The material tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 material tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote testing and data save.

- Large measuring range:  320 μm  / 12.6 mil 
- Accuracy: ± 10%
- Repeat accuracy: ± 7%
- Touchscreen configuration and bluetooth connectivity 
- Sensor has diamond test head 
- Optional sensors and extension rod for small holes and curved surfaces 
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 2,472.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 2300-ICA
The profilometer PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 profilometer tester has a detachable motorized sensor that allows the material tester to determine the surface profile roughness even on small or narrow profiles. Free software download for remote testing and data save.

- Large measuring range:  320 μm  / 12.6 mil 
- Accuracy: ± 10%
- Repeat accuracy: ± 7%
- Touchscreen configuration and bluetooth connectivity 
- Sensor has diamond test head 
- Optional sensors and extension rod for small holes and curved surfaces
- Incl. ISO calibration certificate  
Manufacturer: PCE Instruments
US$ 2,472.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 2300-ICA
The surface testing - roughness tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 roughness tester has a detachable motorized sensor that allows the roughness tester to determine the surface roughness even on small or narrow profiles. Free software download for remote testing and data save.

- Large measuring range:  320 μm  / 12.6 mil 
- Accuracy: ± 10%
- Repeat accuracy: ± 7%
- Touchscreen configuration and bluetooth connectivity 
- Sensor has diamond test head 
- Optional sensors and extension rod for small holes and curved surfaces
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 2,472.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SD 1500B SST

The Pallet Beams PCE-SD..B SST are a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the pallet beams are well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

Manufacturer: PCE Instruments
US$ 2,472.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SD 300B SST

The Pallet Beams PCE-SD..B SST are a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the Pallet Beams are well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 300 kg
- Readability: 0.1 kg
- Calibration value: 0.1 kg
- Verifiable M III

Manufacturer: PCE Instruments
US$ 2,472.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SD 600B SST

The pallet beams PCE-SD..B SST are a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the pallet beams are well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 600 kg
- Readability: 0.2 kg
- Calibration value: 0.2 kg
- Verifiable M III

Manufacturer: PCE Instruments
US$ 2,472.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 2300-ICA
The roughness tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 roughness tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote testing and data save.

- Large measuring range:  320 μm  / 12.6 mil 
- Accuracy: ± 10%
- Repeat accuracy: ± 7%
- Touchscreen configuration and bluetooth connectivity 
- Sensor has diamond test head 
- Optional sensors and extension rod for small holes and curved surfaces
- Incl. ISO calibration certificate  
Manufacturer: PCE Instruments
US$ 2,472.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-3000U

The UCI Durometer PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included
- Other probes as option

 

Manufacturer: PCE Instruments
US$ 2,466.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-3000U

The UCI hardness tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
US$ 2,466.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-3000U

The UCI material tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
US$ 2,466.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-3000U

The UCI ultrasonic tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI ultrasonic tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
US$ 2,466.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer