Order no.: PCE-932

PCE-932 is an easy-to-use, digital, handheld device for high pressure measurement in hydraulic and compressor systems, pumps, tanks and silos in chemical, manufacturing, plastics and HVAC industries. This portable pressure measuring device can be connected to pressure sensors with ranges up to 400 bar (each with a 1.2 m / 3.9 ft connecting cable). Please note: Pressure sensors are sold separately.


- Measuring range: 0 to 400 bar / 0 to 5801 psi, depending on sensor
- Measures system pressure in all media (e.g., gasses, liquids, etc.)
- Offers min, max and hold functionality

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-ND20

The PCE-ND20 built-in one phase power meter measures 3-phase all network parameters. Power, voltage, and power measurements are no problem for the PCE-ND20 built-in one phase power meter. The current measurement can be done with the built-in power measuring device 3-phase and directly. However, it is also possible to measure high currents by means of transducers using the built-in one phase power meter PCE-ND20.


- Illuminated 3.5" LCD display
- Easy installation
- RS485 Modbus interface 

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PH 23
The pH meter PCE-PH 23 is used for rapid fluid analysis. The pH meter offers the possibility of determining the temperature and the pH value. The operation of the pH meter PCE-PH 23 is carried out via the four front-mounted buttons.

- Measuring range pH measurement: 0.00 ... 14.00 pH
- Resolution pH measurement: 0.01 pH
- Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
- Graphic display
- 1-, 2- or 3-point calibration
- Four front panel buttons
- Memory (Save & Recall)
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PHC 10
The pH meter PCE-PHC 10 measures and regulates the pH of various substances and is able to influence the pH value. The pH meter PCE-PHC 10 is a classic 2-point controller, depending on the application, the controller can be used to influence the liquid in the direction of alkaline or acidic. 

- Measuring range: 0 ... 14 pH
- Measuring range: 0 ... 65°C / 32 ... 149°F
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating ...
- Sensors selectable
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PHC 10
The pH value controller PCE-PHC 10 measures and regulates the pH of various substances and is able to influence the pH value. The pH value controller PCE-PHC 10 is a classic 2-point controller, depending on the application, the controller can be used to influence the liquid in the direction of alkaline or acidic. 

- Measuring range: 0 ... 14 pH
- Measuring range: 0 ... 65°C / 32 ... 149°F
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating ...
- Sensors selectable
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 3
With the power analyzer AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the power analyzer. 

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-ND20

The PCE-ND20 built-in power meter measures 3-phase all network parameters. Power, voltage, and power measurements are no problem for the PCE-ND20 built-in power meter. The current measurement can be done with the built-in power measuring device 3-phase and directly. However, it is also possible to measure high currents by means of transducers using the built-in power meter PCE-ND20.


- Illuminated 3.5" LCD display
- Easy installation
- RS485 Modbus interface 

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-ND20

The PCE-ND20 built-in power indicator measures 3-phase all network parameters. Power, voltage, and power measurements are no problem for the PCE-ND20 built-in power indicator. The current measurement can be done with the built-in power measuring device 3-phase and directly. However, it is also possible to measure high currents by means of transducers using the built-in power indicator PCE-ND20.


- Illuminated 3.5" LCD display
- Easy installation
- RS485 Modbus interface 

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-ND20

The PCE-ND20 built-in power meter measures 3-phase all network parameters. Power, voltage, and power measurements are no problem for the PCE-ND20 built-in power meter. The current measurement can be done with the built-in power measuring device 3-phase and directly. However, it is also possible to measure high currents by means of transducers using the built-in power meter PCE-ND20.


- Illuminated 3.5" LCD display
- Easy installation
- RS485 Modbus interface 

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 3
With the power meter AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the power meter. 

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-932

PCE-932 is an easy-to-use, digital, handheld device for high pressure measurement in hydraulic and compressor systems, pumps, tanks and silos in chemical, manufacturing, plastics and HVAC industries. This portable pressure measuring device can be connected to pressure sensors with ranges up to 400 bar (each with a 1.2 m / 3.9 ft connecting cable). Please note: Pressure sensors are sold separately.


- Measuring range: 0 to 400 bar / 0 to 5801 psi, depending on sensor
- Measures system pressure in all media (e.g., gasses, liquids, etc.)
- Offers min, max and hold functionality


Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-P50
The pressure gauge PCE-P50 with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

- Range: ± 6900mbar / ± 100 psi
- Resolution: 4mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-932

PCE-932 is an easy-to-use, digital, handheld device for high pressure measurement in hydraulic and compressor systems, pumps, tanks and silos in chemical, manufacturing, plastics and HVAC industries. This portable pressure measuring device can be connected to pressure sensors with ranges up to 400 bar (each with a 1.2 m / 3.9 ft connecting cable). Please note: pressure sensors are sold separately.


- Measuring range: 0 to 400 bar / 0 to 5801 psi, depending on sensor
- Measures system pressure in all media (e.g., gases, liquids, etc.)
- Offers min, max and hold functionality


Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-P50
The pressure meter PCE-P50 with highest accuracy and best performance. With this pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure meter is ideal for use in industry, in service and in the laboratory.

- Range: ± 6900mbar / ± 100 psi
- Resolution: 4mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PHC 10
The process controller / pH controller PCE-PHC 10 measures and regulates the pH of various substances and is able to influence the pH value. The pH controller PCE-PHC 10 is a classic 2-point controller, depending on the application, the controller can be used to influence the liquid in the direction of alkaline or acidic. 

- Measuring range: 0 ... 14 pH
- Measuring range: 0 ... 65°C / 32 ... 149°F
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating ...
- Sensors selectable
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LPS 3305
A Programmable Power Supply is used in the professional laboratory, for example in development. Such a programmable power supply helps the operator to provide the right voltages in a matter of seconds.

- 1 adjustable output up to 30 V and 5 A.
- adjustable via PC with software
- additionally with two fixed voltage regulators
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LRF 600

PCE-LRF 600 is a metric-only laser rangefinding distance meter that not only measures distance, but also determines the speed of moving objects. Ideal for hunting, shooting, golfing and more, these compact rangefinding binoculars make great gifts for sports and outdoor enthusiasts.


- Distance measurement range: 6 ... 800 m
- Distance measurement accuracy: ±1 m; ± 0.2%
- Speed measurement range: 0 ... 300 km/h
- Speed measurement accuracy: ±1 km/h
- Measurement resolution: 1 m or 1 km/h

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-423

The PCE-423 Thermo-anemometer with thermal sensor is highlighted by its good relation between price and quality. The PCE-423 Thermo-anemometer has a high resolution to be used for different applications. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Kind of sensor: Hot wire
- External
- Memory: No
- Interface: USB
- Measurement range: 0.1 ... 25.0 m/s, 0.2 ...55.8 mph
- Resolution: 0.01 m/s, 0.1 mph

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-ND20

The PCE-ND20 built-in three phase power meter measures 3-phase all network parameters. Power, voltage, and power measurements are no problem for the PCE-ND20 built-in three phase power meter. The current measurement can be done with the built-in power measuring device 3-phase and directly. However, it is also possible to measure high currents by means of transducers using the built-in three phase power meter PCE-ND20.


- Illuminated 3.5" LCD display
- Easy installation
- RS485 Modbus interface 

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LCT 3
The voltmeter is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the voltmeter.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer