Electrical Tester PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose electrical tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Environmental Meter PCE-PH 30
US$ 257.00
ex. VAT, ex. delivery costs
The environmental meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Environmental Meter PCE-PH20-ICA incl. ISO calibration certificate
US$ 257.00
ex. VAT, ex. delivery costs
ISO Calibration
The environmental meter was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

Environmental Tester PCE-PH 30
US$ 257.00
ex. VAT, ex. delivery costs
The environmental tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental tester PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Environmental Tester PCE-PH20-ICA incl. ISO calibration certificate
US$ 257.00
ex. VAT, ex. delivery costs
ISO Calibration
The Environmental Tester PCE-PH20-ICA was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

HVAC Meter PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose HVAC meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

pH Meter PCE-PH 30
US$ 257.00
ex. VAT, ex. delivery costs
The pH meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable pH meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
pH Meter PCE-PH20-ICA incl. ISO calibration certificate
US$ 257.00
ex. VAT, ex. delivery costs
ISO Calibration
The pH meter was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

Portable Power Analyzer PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose Portable Power Analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Power Analyzer PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a multipurpose power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Salt Meter PCE-PH 30
US$ 257.00
ex. VAT, ex. delivery costs
The salt meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable salt meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Three Phase Power Data Logger PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

PCE-PCM 1 is a three phase power data logger or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Three-Phase Power Meter PCE-PCM 1
US$ 257.00
ex. VAT, ex. delivery costs

This device is a multipurpose three- / 3- phase-power meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.


- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Water Analysis Meter PCE-PH 30
US$ 257.00
ex. VAT, ex. delivery costs
The water analysis meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable water analysis meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Water Analysis Meter PCE-PH20-ICA incl. ISO calibration certificate
US$ 257.00
ex. VAT, ex. delivery costs
ISO Calibration
The water analysis meter was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

DIN-Rail Measuring Instrument PCE-SM5
US$ 256.00
ex. VAT, ex. delivery costs
The PCE-SM5 DIN rail measuring device is suitable for making binary signals bus-capable. This input module enables machine and switching states to be queried.

 

- Input channels: 8
- Inputs: binary input
- Interface: RS485 Modbus (ASCII RTU)
- Power supply: 85 ... 253 V / 20 ... 50 V AC/DC (selectable)

Air Flow Meter Station PCE-FWS 20N-1
US$ 253.00
ex. VAT, ex. delivery costs

This air flow meter station with outside sensor is a real all-rounder. The wireless air flow meter station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless air flow meter station and outside sensors. The weather data of the air flow meter station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Air Humidity Meter Station PCE-FWS 20N-1
US$ 253.00
ex. VAT, ex. delivery costs

This air humidity meter station with outside sensor is a real all-rounder. The wireless air humidity meter station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless air humidity meter station and outside sensors. The weather data of the air humidity meter station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...