Industrial Measurement Products and Solutions
Order no.: PCE-ND10
The current indicator PCE-ND10 measures all 3-phase network parameters. Power, voltage, and power measurements are not a problem for the PCE-ND10 power indicator. 

 

- Detection of wrong phase sequence
- Pulse output of the effective energy
- IP 65 on the front
- Voltage supply via measuring connections
- Different variants can be selected! Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
US$ 222.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DX-AS-ICA

Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 254.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DX-AS-ICA

Mechanical shore hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 254.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-675-ICA
The dew point thermometer PCE-675-ICA incl. ISO calibration certificate has a 13:1 spot-to-spot ratio and can accurately measure surface temperatures and ambient humidity over a very long distance. The dew point thermometer is universally applicable.

Measuring function
- Measuring range infrared: -50 ... 550 °C
Thermoelement Type-K: -50 … 850 ºC 
- Measuring range air temperature: -20 … 60 ºC
- Measuring range humidity: 0 … 100 % r.H.
- Measuring range dew point: -20 … 60 ºC
- Measuring range wet bulb temp.: -20 … 60ºC 
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 253.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-675-ICA
The digital thermometer PCE-675-ICA incl. ISO calibration certificate has a 13:1 spot-to-spot ratio and can accurately measure surface temperatures and ambient humidity over a very long distance. The digital thermometer is universally applicable.

Measuring function
- Measuring range infrared: -50 ... 550 °C
Thermoelement Type-K: -50 … 850 ºC 
- Measuring range air temperature: -20 … 60 ºC
- Measuring range humidity: 0 … 100 % r.H.
- Measuring range dew point: -20 … 60 ºC
- Measuring range wet bulb temp.: -20 … 60ºC 
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 253.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-675-ICA
The HVAC meter PCE-675-ICA incl. ISO calibration certificate has a 13:1 spot-to-spot ratio and can accurately measure surface temperatures and ambient humidity over a very long distance. The HVAC meter is universally applicable.

Measuring function
- Measuring range infrared: -50 ... 550 °C
Thermoelement Type-K: -50 … 850 ºC 
- Measuring range air temperature: -20 … 60 ºC
- Measuring range humidity: 0 … 100 % r.H.
- Measuring range dew point: -20 … 60 ºC
- Measuring range wet bulb temp.: -20 … 60ºC 
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 253.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-675-ICA
The infrared thermometer PCE-675-ICA incl. ISO calibration certificate has a 13:1 spot-to-spot ratio and can accurately measure surface temperatures and ambient humidity over a very long distance. The infrared thermometer is universally applicable.

Measuring function
- Measuring range infrared: -50 ... 550 °C
Thermoelement Type-K: -50 … 850 ºC 
- Measuring range air temperature: -20 … 60 ºC
- Measuring range humidity: 0 … 100 % r.H.
- Measuring range dew point: -20 … 60 ºC
- Measuring range wet bulb temp.: -20 … 60ºC 
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 253.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-675-ICA
The PCE-675-ICA incl. ISO calibration certificate pyrometer has a 13:1 spot-to-spot ratio and can accurately measure surface temperatures and ambient humidity over a very long distance. The pyrometer is universally applicable.

Measuring function
- Measuring range infrared: -50 ... 550 °C
Thermoelement Type-K: -50 … 850 ºC 
- Measuring range air temperature: -20 … 60 ºC
- Measuring range humidity: 0 … 100 % r.H.
- Measuring range dew point: -20 … 60 ºC
- Measuring range wet bulb temp.: -20 … 60ºC 
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 253.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-675-ICA
The Surface Testing - Temperature Meter PCE-675-ICA Incl. ISO Calibration Certificate has a 13:1 spot-to-spot ratio and can accurately measure surface temperatures and ambient humidity over a very long distance. The Surface Testing - Temperature Meter is universally applicable.

Measuring function
- Measuring range infrared: -50 ... 550 °C
Thermoelement Type-K: -50 … 850 ºC 
- Measuring range air temperature: -20 … 60 ºC
- Measuring range humidity: 0 … 100 % r.H.
- Measuring range dew point: -20 … 60 ºC
- Measuring range wet bulb temp.: -20 … 60ºC 
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 253.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-675-ICA
The Temperature Meter PCE-675-ICA incl. ISO calibration certificate has a 13:1 spot-to-spot ratio and can accurately measure surface temperatures and ambient humidity over a very long distance. The Temperature Meter is universally applicable.

Measuring function
- Measuring range infrared: -50 ... 550 °C
Thermoelement Type-K: -50 … 850 ºC 
- Measuring range air temperature: -20 … 60 ºC
- Measuring range humidity: 0 … 100 % r.H.
- Measuring range dew point: -20 … 60 ºC
- Measuring range wet bulb temp.: -20 … 60ºC 
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 253.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-675-ICA
The thermometer PCE-675-ICA incl. ISO calibration certificate has a 13:1 spot-to-spot ratio and can accurately measure surface temperatures and ambient humidity over a very long distance. The thermometer is universally applicable.

Measuring function
- Measuring range infrared: -50 ... 550 °C
Thermoelement Type-K: -50 … 850 ºC 
- Measuring range air temperature: -20 … 60 ºC
- Measuring range humidity: 0 … 100 % r.H.
- Measuring range dew point: -20 … 60 ºC
- Measuring range wet bulb temp.: -20 … 60ºC 
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 253.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N30P-1
Power Meter with one phase measurement for all parameters: voltage, current, etc.
Manufacturer: PCE Instruments
US$ 252.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N30P-1
Power Meter with one phase measurement for all parameters: voltage, current, etc.
Manufacturer: PCE Instruments
US$ 252.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-423

The PCE-423 air flow meter with thermal sensor is highlighted by its good relation between price and quality. The PCE-423 air flow meter has a high resolution to be used for different applications. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Kind of sensor: Hot wire
- External
- Memory: No
- Interface: USB
- Measurement range: 0.1 ... 25.0 m/s, 0.2 ...55.8 mph
- Resolution: 0.01 m/s, 0.1 mph

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-423

The PCE-423 Airflow Meter with thermal sensor is highlighted by its good relation between price and quality. The PCE-423 Airflow Meter has a high resolution to be used for different applications. This PCE-423 Airflow Meter. It belongs to the the basic equipment for professionals working with ventilation systems.


- Kind of sensor: Hot wire
- External
- Memory: No
- Interface: USB
- Measurement range: 0.1 ... 25.0 m/s, 0.2 ...55.8 mph
- Resolution: 0.01 m/s, 0.1 mph

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-423

The PCE-423 Air Velocity Meter with thermal sensor is highlighted by its good relation between price and quality. The PCE-423 Air Velocity Meter has a high resolution to be used for different applications. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Kind of sensor: Hot wire
- External
- Memory: No
- Interface: USB
- Measurement range: 0.1 ... 25.0 m/s, 0.2 ...55.8 mph
- Resolution: 0.01 m/s, 0.1 mph

 

Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LCT 3
The automotive tester is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the automotive tester.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CAL-SH5-Z
[more]
Manufacturer: Exova Metech GmbH ( Caldi )
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LCT 3
The clamp meter is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the clamp meter.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 3
With the clamp meter AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the clamp meter. 

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer