Industrial Measurement Products and Solutions
Order no.: PCE-ET 5000
The earth tester is a versatile ohmmeter. With this earth tester a variety of resistance measurements can be performed. Thus, with the earth tester, the possibility exists to perform a normal resistance measurement of 2- or 4-pole application.

- Interference currents, interference voltages, frequencies
- Direct and indirect resistance measurement
- Data memory for later analysis on the PC
- Mobile use thanks to battery and batteries
Manufacturer: PCE Instruments
US$ 2,530.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-3000U
The UCI Durometer PCE-3000U can be used to quickly check the hardness of components even when they are installed. The device impresses with its large measuring range, easy handling, robust design and temperature resistance down to -20°C. 

- Measurement according to UCI method
- Testing of HRC, HRB, HV, HB, MPa
- Measuring direction 360 °
- Large LCD
- USB interface
- Incl. 50 N / 11.2 lbs UCI probe
Manufacturer: PCE Instruments
US$ 2,466.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-3000U

The UCI hardness tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing or UCI 
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
US$ 2,466.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-3000U

The UCI material tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
US$ 2,466.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-3000U

The UCI metal hardness tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI metal hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
US$ 2,466.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-3000U
The UCI ultrasonic tester PCE-3000U can be used to quickly check the hardness of components even when they are installed. The device impresses with its large measuring range, easy handling, robust design and temperature resistance down to -20°C / -4°F. 

- Measurement according to UCI method
- Testing of HRC, HRB, HV, HB, MPa
- Measuring direction 360 °
- Large LCD
- USB interface
- Incl. 50 N / 11.2 lbs UCI probe
Manufacturer: PCE Instruments
US$ 2,466.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TDS 100H+

The ultrasonic flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the ultrasonic flow meter is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. evaluation software
- Incl. temperature datalogger
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 2,441.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TDS 100H+

The ultrasonic flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the ultrasonic flow meter is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. evaluation software
- Incl. temperature datalogger
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 2,441.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TDS 100H+

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the ultrasonic flow tester is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. evaluation software
- Incl. temperature datalogger
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 2,441.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VM 31

The PCE-VM 31 Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Sensors not included - sold separately (see accessories)

 

Manufacturer: PCE Instruments
US$ 2,411.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VM 31

The PCE-VM 31 Human Vibration Meter is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Sensors not included - sold separately (see accessories)

 

Manufacturer: PCE Instruments
US$ 2,411.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VM 31

The PCE-VM 31 Tri-Axial Accelerometer is designed for measuring human vibration at the workplace. The Accelerometer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Sensors not included - sold separately (see accessories)

 

Manufacturer: PCE Instruments
US$ 2,411.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 12US
The dust measuring device PCE-PQC 12US quickly detects where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Handheld Particle Counter with 10 hour battery life continuous use
- 3 channel measuring range 0.3(fixed) 0.5-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
- Made in the USA
Manufacturer: PCE Instruments
US$ 2,395.01

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 12US
The dust monitor PCE-PQC 12US quickly detects where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Handheld Particle Counter with 10 hour battery life continuous use
- 3 channel measuring range 0.3(fixed) 0.5-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
- Made in the USA
Manufacturer: PCE Instruments
US$ 2,395.01

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 12US
The particle counter PCE-PQC 12US quickly detects where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Handheld Particle Counter with 10 hour battery life continuous use
- 3 channel measuring range 0.3(fixed) 0.5-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
- Made in the USA
Manufacturer: PCE Instruments
US$ 2,395.01

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PM5

PM5 is a portable handheld paper moisture analyzer used to take accurate nondestructive measurements of the moisture content or water content and temperature of cardboard and paper products. Ideal for stacks and rolls of paper products and warm running rolls and stationary cold rolls. Infrared temp sensor and optional bluetooth for data transfer.


- Moisture content range: 1 ... 25%
- Temperature range: 0 ... +80 °C / +32 ... +176 °F
- Accuracy: ±1 %, ±1 °C
- Measuring depth to 50 mm
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 2,386.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PM5

PM5 is a portable handheld paper moisture meter used to take accurate nondestructive measurements of the moisture content or water content and temperature of cardboard and paper products. Ideal for stacks and rolls of paper products and warm running rolls and stationary cold rolls. Infrared temp sensor and optional bluetooth for data transfer.


- Moisture content range: 1 ... 25%
- Temperature range: 0 ... +80 °C / +32 ... +176 °F
- Accuracy: ±1 %, ±1 °C
- Measuring depth to 50 mm
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 2,386.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PM5

PM5 is a portable handheld paper moisture meter used to take accurate nondestructive measurements of the moisture content or water content and temperature of cardboard and paper products. Ideal for stacks and rolls of paper products and warm running rolls and stationary cold rolls. Infrared temp sensor and optional bluetooth for data transfer.


- Moisture content range: 1 ... 25%
- Temperature range: 0 ... +80 °C / +32 ... +176 °F
- Accuracy: ±1 %, ±1 °C
- Measuring depth to 50 mm
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 2,386.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-432

PCE-432 is a class 1 data logging sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter is equipped with GPS functionality, allowing measured values to be assigned to an exact geographic location. The sound level meter calculates the equivalent continuous sound level Leq (LXeq).


- Measuring range: 22 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- GPS receiver for location determination
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
US$ 2,342.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-432

PCE-432 is a class 1 data-logging decibel meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter is equipped with GPS functionality, allowing measured values to be assigned to an exact geographic location.

- Measuring range: 22 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
US$ 2,342.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer