Universal Testing Machine PCE-HTS 50
US$ 2,206.00
ex. VAT, ex. delivery costs

The motorized tension-compression Universal Testing Machine is a motorized test station with a force range of up to 500 N. With the help of the horizontal Universal Testing Machine, it is possible to to carry out tension-compression tests.

  • Force range: 500 N / 50 kg / 110 lb
  • Distance display resolution: 0.02 mm
  • Resolution: 1 mm/min
  • Tensile and compression testing
  • Travel: 270 mm / 10.6"

Gloss Meter PCE-SGM 60
US$ 2,204.00
ex. VAT, ex. delivery costs

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm

Gloss Test Instrument PCE-SGM 60
US$ 2,204.00
ex. VAT, ex. delivery costs

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm

Paint Gloss Tester PCE-SGM 60
US$ 2,204.00
ex. VAT, ex. delivery costs

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm

Surface Testing - Gloss Meter PCE-SGM 60
US$ 2,204.00
ex. VAT, ex. delivery costs

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm

Electrical Tester PCE-MO 3001
US$ 2,198.00
ex. VAT, ex. delivery costs

Electrical Tester in a robust case with a resolution of up to 1 μΩ.


  • Four-wire method
  • Six selectable measuring ranges
  • Large LCD display
  • Max. Current is 1 A
  • Safety: EN 61010-1


Electrical Tester PCE-MO 3001-ICA incl. ISO-Calibration certificate
US$ 2,198.00
ex. VAT, ex. delivery costs
ISO Calibration

The ohm meter PCE-MO 3001 is made to measure smallest electrical resistances. It uses four test cables that can be connected to the ohm meter. The ohm meter uses two test cables and a constant current source to allow stable current to flow within the measured device. 


  • Four-wire method
  • Six selectable measuring ranges
  • Large LCD display
  • Max. Current is 1 A
  • Safety: EN 61010-1
  • incl. ISO-Calibration certificate

 


Microohm-Meter PCE-MO 3001
US$ 2,198.00
ex. VAT, ex. delivery costs

Microohm-Meter in a robust case with a resolution of up to 1 μΩ.


  • Four-wire method
  • Six selectable measuring ranges
  • Large LCD display
  • Max. current is 1 A
  • Safety: EN 61010-1 

Microohm-Meter PCE-MO 3001
US$ 2,198.00
ex. VAT, ex. delivery costs

The microohm meter PCE-MO 3001 is made to measure smallest electrical resistances. It uses four test cables that can be connected to the microohm meter. The microohm meter uses two test cables and a constant current source to allow stable current to flow within the measured device. 


  • Four-wire method
  • Six selectable measuring ranges
  • Large LCD display
  • Max. current is 1 A
  • Safety: EN 61010-1