Industrial Measurement Products and Solutions
Order no.: PCE-DC 41

The clamp meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the clamp meter, or you can use the integrated clamp mechanism. By using the clamp of the clamp meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC 41

The clamp on tester PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the clamp on tester, or you can use the integrated clamp mechanism. By using the clamp of the clamp on tester, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-T 238
The condition monitoring tachometer PCE-T 238 is a battery-powered hand-held device that allows mobile use. The condition monitoring tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The condition monitoring tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM
- Contact measurement range: 0.5 ... 19,999 RPM
- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC 41

The current clamp PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the current clamp, or you can use the integrated clamp mechanism. By using the clamp of the current clamp, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC 41

The digital multimeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the digital multimeter, or you can use the integrated clamp mechanism. By using the clamp of the digital multimeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-127/4
DIN flow cup meters are viscosity meters to determine the viscosity of liquids. The flow cup meters are often used in industry and research laboratories.

- Capacity: 100 ml
- Ø nozzle: 4 mm (± 0.02 mm)
- Material: anodized aluminum
- Standard: DIN 53211
Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-127/4
DIN flow cup viscometers are viscosity meters to determine the viscosity of liquids. The flow cup viscometers are often used in industry and research laboratories.

- Capacity: 100 ml
- Ø nozzle: 4 mm (± 0.02 mm)
- Material: anodized aluminum
- Standard: DIN 53211
Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC 41

The electrical tester PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the electrical tester, or you can use the integrated clamp mechanism. By using the clamp of the electrical tester, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-T 238
The handheld tachometer PCE-T 238 is a battery-powered device that allows mobile use. The handheld tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The handheld tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM
- Contact measurement range: 0.5 ... 19,999 RPM
- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC 41

The HVAC meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the HVAC meter, or you can use the integrated clamp mechanism. By using the clamp of the HVAC meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: CAL-PCE-LUX
ISO Calibration Certificate for Lux Meters.
Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-128/3
ISO flow cup meters are suitable for determining the flow time of Newtonian / near-Newtonian liquids and are often used in laboratories and industrial production.

- Measuring range: 7 ... 42 cSt
- Ø nozzle: 3 mm
- Material: anodized aluminum and stainless steel
- Standard: ISO 2431, DIN 53224, EN 535, ASTM D5125
Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-128/3
ISO flow cup viscometers are suitable for determining the flow time of Newtonian / near-Newtonian liquids and are often used in laboratories and industrial production.

- Measuring range: 7 ... 42 cSt
- Ø nozzle: 3 mm
- Material: anodized aluminum and stainless steel
- Standard: ISO 2431, DIN 53224, EN 535, ASTM D5125
Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LED 20

PCE-LED 20 is a light meter with an external LED light sensor. The cable of the LED light sensor has a length of approximately 1.5 m / 4.9 ft.


- Measuring range: 40 / 400 / 4000 / 40000 / 400000 lx or fc
- Measuring units (selectable): Lux (lx) or footcandle (fc)
- Accuracy: ± 3% (with a standard incandescent lamp at 2856 K and LED white light), ± 6% for other visible light sources

Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LED 20

PCE-LED 20 is a lux meter with an external LED light sensor. The cable of the LED light sensor has a length of approximately 1.5 m / 4.9 ft.


- Measuring range: 40 / 400 / 4000 / 40000 / 400000 lx or fc
- Measuring units (selectable): Lux (lx) or footcandle (fc)
- Accuracy: ± 3% (with a standard incandescent lamp at 2856 K and LED white light), ± 6% for other visible light sources

Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-127/4
Paint viscosity testers are viscosity meters to determine the viscosity of liquids. The paint viscosity testers are often used in industry and research laboratories.

- Capacity: 100 ml
- Ø nozzle: 4 mm (± 0.02 mm)
- Material: anodized aluminum
- Standard: DIN 53211
Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-128/3
Paint viscosity testers are suitable for determining the flow time of Newtonian / near-Newtonian liquids and are often used in laboratories and industrial production.

- Measuring range: 7 ... 42 cSt
- Ø nozzle: 3 mm
- Material: anodized aluminum and stainless steel
- Standard: ISO 2431, DIN 53224, EN 535, ASTM D5125
Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Easycount-1-CEE-G

The Easycount-1-CEE-G 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-G energy meter are equipped with male and female connectors.


- Calibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ


Manufacturer: J. Schell GmbH
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Easycount-1-Schuko-G

The Easycount-1-Schuko-G 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-G energy meter are equipped with male and female connectors.


- Calibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ


Manufacturer: J. Schell GmbH
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LED 20

The PCE-LED 20 is a photometer with an external LED light sensor. The cable of the LED light sensor has a length of approximately 1.5 m / 4.9 ft.


- Measuring range: 40 / 400 / 4000 / 40000 / 400000 lx or fc
- Measuring units (selectable): Lux (lx) or footcandle (fc)
- Accuracy: ± 3% (with a standard incandescent lamp at 2856 K and LED white light), ± 6% for other visible light sources

Manufacturer: PCE Instruments
US$ 232.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer