Counting Scale PCE-BS 300
US$ 211.00
ex. VAT, ex. delivery costs

The Counting Scale PCE-BS 300 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Counting Scale PCE-BS 300 can be used for weighing as well as for piece counting.


- Weighing capacity: Max. 300 g
- Readability (g): 0.01
- Repeatability (g): 0.01
- Calibratable

Counting Scale PCE-BSK 5100
US$ 211.00
ex. VAT, ex. delivery costs
The counting scale is a scale for daily laboratory use. Another function besides the normal measuring function of the counting scale is the piece counting function. This function allows the counting scale to determine the number of screws, for example.

- Measuring range: 0 ... 5100 g
- Resolution: 0.1 g
- Piece counting function
- RS-232 interface
- External calibration
Digital Multimeter PCE-BDM 20
US$ 211.00
ex. VAT, ex. delivery costs
This is a digital multimeter for a stationary workplace. In addition to measuring the current, voltage and resistance, the PCE-BDM 20 digital multimeter can also measure the temperature using two thermocouples and also determine the conductivity.

Parameter:
- AC voltage, DC voltage
- AC / DC
- Resistance, conductivity
- Capacitance measurement, temperature
- Frequency measurement , duty cycle ratio
- Pulse width, continuity test
- Diode test
Digital Thermometer PCE-ST 1-ICA incl. ISO-Calibration Cerificate
US$ 211.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-ST 1 Digital Thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The Digital Thermometer is very easy to use, with small dimensions and short response time.


- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF
incl. ISO-Calibration Cerificate

Electrical Tester PCE-BDM 20
US$ 211.00
ex. VAT, ex. delivery costs
This is a electrical tester for a stationary workplace. In addition to measuring the current, voltage and resistance, the PCE-BDM 20 electrical tester can also measure the temperature using two thermocouples and also determine the conductivity.

Parameter:
- AC voltage, DC voltage
- AC / DC
- Resistance, conductivity
- Capacitance measurement, temperature
- Frequency measurement , duty cycle ratio
- Pulse width, continuity test
- Diode test
Environmental Meter PCE-ST 1-ICA incl. ISO-Calibration Cerificate
US$ 211.00
ex. VAT, ex. delivery costs
ISO Calibration

The environmental meter is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The environmental meter is very easy to use, with small dimensions and short response time.


- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF
incl. ISO-Calibration Cerificate

Environmental Tester PCE-ST 1-ICA incl. ISO-Calibration Cerificate
US$ 211.00
ex. VAT, ex. delivery costs
ISO Calibration

The environmental tester is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The environmental tester is very easy to use, with small dimensions and short response time.


- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF
incl. ISO-Calibration Cerificate

Food / Hygiene Temperature Meter PCE-ST 1-ICA incl. ISO-Calibration Cerificate
US$ 211.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-ST 1 Food / Hygiene Temperature Meter is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The food / hygiene temperature meter is very easy to use, with small dimensions and short response time.


- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF
incl. ISO-Calibration Cerificate

Food Thermometer PCE-ST 1-ICA incl. ISO-Calibration Cerificate
US$ 211.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-ST 1 food thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The thermometer is very easy to use, with small dimensions and short response time.


- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF
incl. ISO-Calibration Cerificate

Humidity Detector PCE-P18 0...10V
US$ 211.00
ex. VAT, ex. delivery costs
The humidity detector is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity detector as a standard signal 4 ... 20 mA. Air humidity and temperature are precisely determined in this compact humidity detector using a semiconductor component.

- Measuring range humidity: 0 ... 100% RH
- Measuring range temperature: - 20 ... 60 ° C
- Interface: RS 485 Modbus 
- Analog output: 0 ... 10 V
Humidity Sensor PCE-P18 0...10V
US$ 211.00
ex. VAT, ex. delivery costs
The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity sensor as a standard signal 4 ... 20 mA. Air humidity and temperature are precisely determined in this compact humidity sensor using a semiconductor component.

- Measuring range humidity: 0 ... 100% RH
- Measuring range temperature: - 20 ... 60 ° C
- Interface: RS 485 Modbus 
- Analog output: 0 ... 10 V
HVAC Meter PCE-P18 0...10V
US$ 211.00
ex. VAT, ex. delivery costs
The HVAC meter is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the HVAC meter as a standard signal 4 ... 20 mA. Air humidity and temperature are precisely determined in this compact HVAC meter using a semiconductor component.

- Measuring range humidity: 0 ... 100% RH
- Measuring range temperature: - 20 ... 60 ° C
- Interface: RS 485 Modbus 
- Analog output: 0 ... 10 V 
HVAC Meter PCE-ST 1-ICA incl. ISO-Calibration Cerificate
US$ 211.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-ST 1 HVAC Meter is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The HVAC Meter is very easy to use, with small dimensions and short response time.


- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF
incl. ISO-Calibration Cerificate

Hygrometer PCE-P18 0...10V
US$ 211.00
ex. VAT, ex. delivery costs
The hygrometer is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the hygrometer as a standard signal 4 ... 20 mA. Air humidity and temperature are precisely determined in this compact hygrometer using a semiconductor component.

- Measuring range humidity: 0 ... 100% RH
- Measuring range temperature: - 20 ... 60 ° C
- Interface: RS 485 Modbus 
- Analog output: 0 ... 10 V 
Inventory Scale PCE-BSK 5100
US$ 211.00
ex. VAT, ex. delivery costs
The inventory scale is a scale for daily laboratory use. Another function besides the normal measuring function of the inventory scale is the piece counting function. This function allows the inventory scale to determine the number of screws, for example.

- Measuring range: 0 ... 5100 g
- Resolution: 0.1 g
- Piece counting function
- RS-232 interface
- External calibration
ISO Calibration Certificate CAL-PCE-AB
US$ 211.00
ex. VAT, ex. delivery costs
ISO Calibration Certificate for PCE-ABT series scales certifies accuracy and is often required to comply with DIN ISO 9000.

Calibration certificates are issued specifically for the customer and are excluded from the right of return.
ISO Calibration Certificate for Temperature and Humidity
US$ 211.00
ex. VAT, ex. delivery costs
An ISO calibration certificate is often required to comply with DIN ISO 9000. Each calibration certificate is issued specifically for the customer and instrument. Therefore, calibration certificates are excluded from the right of return.

- Thermometer function (3 measuring points) 15 °C; 25 °C and 35 °C
- Hygrometer function (3 measuring points)  30% r.H.; 50% r.H. and 80% r.H.
Laboratory Balance PCE-BS 300
US$ 211.00
ex. VAT, ex. delivery costs

The Laboratory Balance PCE-BS 300 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Laboratory Balance PCE-BS 300 can be used for weighing as well as for piece counting.


- Weighing capacity: Max. 300 g
- Readability (g): 0.01
- Repeatability (g): 0.01
- Calibratable