Query results | PCE Instruments

US$ 2,085.00

ex. VAT, ex. delivery costs

The torque meter PCE-DFG N 100TW consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

Measurement range: 100 Nm / 73.76 ft-lb
Resolution: 0.1 Nm / 0.0738 ft-lb
Measurement uncertainty: ± 0.5% of the measurement range
Memory for 100 measurement series with 8,000 measurement points each
USB interface including PC software
Graphic display

Gas Detector AQ-300 Set EOZ

US$ 2,084.00

ex. VAT, ex. delivery costs

Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

High accuracy and functionality
Interchangeable sensor heads!
Battery operation
Sensor head EOZ included in delivery (Ozone 0-10 ppm)
Alarm function

Gas Detector AQ-300 Set OZL

US$ 2,084.00

ex. VAT, ex. delivery costs

Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

High accuracy and functionality
Interchangeable sensor heads!
Battery operation
Sensor head OZL included in delivery (0-0.5 ppm)
Alarm function

Gas Leak Detector AQ-300 Set EOZ

US$ 2,084.00

ex. VAT, ex. delivery costs

Gas Leak Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.

High accuracy and functionality
Interchangeable sensor heads!
Battery operation
Sensor head EOZ included in delivery (Ozone 0-10 ppm)
Alarm function

Gas Leak Detector AQ-300 Set OZL

US$ 2,084.00

ex. VAT, ex. delivery costs

High accuracy and functionality
Interchangeable sensor heads!
Battery operation
Sensor head OZL included in delivery (0-0.5 ppm)
Alarm function

Ozone Meter AQ-300 Set EOZ

US$ 2,084.00

ex. VAT, ex. delivery costs

Ozone Meter AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

High accuracy and functionality
Interchangeable sensor heads!
Battery operation
Sensor head EOZ included in delivery (Ozone 0-10 ppm)- Alarm function

Ozone Meter AQ-300 Set OZL

US$ 2,084.00

ex. VAT, ex. delivery costs

Ozone Meter AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

High accuracy and functionality
Interchangeable sensor heads!
Battery operation
Sensor head OZL included in delivery (0-0.5 ppm)
Alarm function

Flow Meter PCE-UFM 65CU

US$ 2,079.00

ex. VAT, ex. delivery costs

Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN65 (59 ... 67 mm)

Flow Meter PCE-UFM 65PVC

US$ 2,079.00

ex. VAT, ex. delivery costs

Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN65 (72 ... 80 mm)

Heat Pump Test Equipment PCE-UFM 65CU

US$ 2,079.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN65 (59 ... 67 mm)

Heat Pump Test Equipment PCE-UFM 65PVC

US$ 2,079.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN65 (72 ... 80 mm)

HVAC Meter / HVACR Tester PCE-UFM 65CU

US$ 2,079.00

ex. VAT, ex. delivery costs

Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN65 (59 ... 67 mm)

HVAC Meter / HVACR Tester PCE-UFM 65PVC

US$ 2,079.00

ex. VAT, ex. delivery costs

Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN65 (72 ... 80 mm)

Ultrasonic Flow Meter PCE-UFM 65CU

US$ 2,079.00

ex. VAT, ex. delivery costs

Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Ultrasonic Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN65 (59 ... 67 mm)

Ultrasonic Flow Meter PCE-UFM 65PVC

US$ 2,079.00

ex. VAT, ex. delivery costs

Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Ultrasonic Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN65 (72 ... 80 mm)

Ultrasonic Tester / Ultrasonic Testing PCE-UFM 65CU

US$ 2,079.00

ex. VAT, ex. delivery costs

Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN65 (59 ... 67 mm)

Ultrasonic Tester / Ultrasonic Testing PCE-UFM 65PVC

US$ 2,079.00

ex. VAT, ex. delivery costs

Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN65 (72 ... 80 mm)

Gloss Meter PCE-PGM 100-ICA incl. ISO calibration certificate

US$ 2,072.00

ex. VAT, ex. delivery costs

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

Measurement geometry: 20° / 60° / 85°
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU
Incl. ISO calibration certificate