Technical Support

Technical advice

Monday - Friday
9 am - 5 pm ET

(561) 320-9162

2 Years Warrenty 2 Years Warrenty

2-Year Warranty

All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects

  1. You are here:
  2. Home
  3. Query results
Condition Monitoring Surface Tester PCE-CT 90-ICA Incl. ISO Calibration Cert.
US$ 2,085.00
ex. VAT, ex. delivery costs
ISO Calibration
The condition monitoring surface tester is a versatile measuring device. This is made possible by the various optional sensors on the condition monitoring surface tester. Thanks to the surface temperature sensor, the condition monitoring surface tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Details
Material Tester PCE-CT 90-ICA Incl. ISO Calibration Certificate
US$ 2,085.00
ex. VAT, ex. delivery costs
ISO Calibration
The material tester is a versatile measuring device. This is made possible by the various optional sensors on the material tester. Thanks to the surface temperature sensor, the material tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Details
NDT Tester PCE-CT 90-ICA Incl. ISO Calibration Certificate
US$ 2,085.00
ex. VAT, ex. delivery costs
ISO Calibration
The NDT tester is a versatile measuring device. This is made possible by the various optional sensors on the NDT tester. Thanks to the surface temperature sensor, the surface tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Details
Paint Thickness Gauge PCE-CT 90-ICA Incl. ISO Calibration Certificate
US$ 2,085.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the paint thickness gauge. Thanks to the surface temperature sensor, the paint thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Details
Paint Thickness Tester PCE-CT 90-ICA Incl. ISO Calibration Certificate
US$ 2,085.00
ex. VAT, ex. delivery costs
ISO Calibration
The thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the thickness gauge. Thanks to the surface temperature sensor, the thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Details
Surface Tester PCE-CT 90-ICA Incl. ISO Calibration Certificate
US$ 2,085.00
ex. VAT, ex. delivery costs
ISO Calibration
The surface tester is a versatile measuring device. This is made possible by the various optional sensors on the surface tester. Thanks to the surface temperature sensor, the surface tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Details
Thickness Gauge PCE-CT 90-ICA Incl. ISO Calibration Certificate
US$ 2,085.00
ex. VAT, ex. delivery costs
ISO Calibration
The thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the thickness gauge. Thanks to the surface temperature sensor, the thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm(Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Details
Thickness Meter PCE-CT 90-ICA Incl. ISO Calibration Certificate
US$ 2,085.00
ex. VAT, ex. delivery costs
ISO Calibration
The Thickness Meter is a versatile measuring device. This is made possible by the various optional sensors on the Thickness Meter. Thanks to the surface temperature sensor, the Thickness Meter can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm(Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Details
Force Gage PCE-DFG N 100TW
US$ 2,084.00
ex. VAT, ex. delivery costs
The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
Details
Force Gauge PCE-DFG N 100TW
US$ 2,084.00
ex. VAT, ex. delivery costs
The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
Details
Torque Meter PCE-DFG N 100TW
US$ 2,084.00
ex. VAT, ex. delivery costs
The torque meter PCE-DFG N 100TW consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
Details
Gloss Meter PCE-PGM 100-ICA incl. ISO calibration certificate
US$ 2,072.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

Details
NDT Test Instruments PCE-PGM 100-ICA incl. ISO calibration certificate
US$ 2,072.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU 
- Incl. ISO calibration certificate

Details
Paint Gloss Tester PCE-PGM 100-ICA incl. ISO calibration certificate
US$ 2,072.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

Details
Surface Testing - Gloss Meter PCE-PGM 100-ICA incl. ISO calibration certificate
US$ 2,072.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU 
- Incl. ISO calibration certificate

Details
Crane Scales PCE-DDM 3-ICA Incl. ISO Calibration
US$ 2,064.00
ex. VAT, ex. delivery costs
ISO Calibration
The crane scales are ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the crane scales. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate
Details
Force Gage PCE-DDM 3-ICA Incl. ISO Calibration
US$ 2,064.00
ex. VAT, ex. delivery costs
ISO Calibration
The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate
Details
Force Gauge PCE-DDM 3-ICA Incl. ISO Calibration
US$ 2,064.00
ex. VAT, ex. delivery costs
ISO Calibration
The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate
Details