Weighing Hook PCE-DDM 5
US$ 1,874.00
ex. VAT, ex. delivery costs

The PCE-DDM 5 Weighing Hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 5 Weighing Hook is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


  • Measurement range: 5,000 kg / 50 kN / 11,023 lbs
  • Resolution: 2 kg / 20 N
  • Units of measurement: kg / t / lbs / N / kN
  • Supplied with remote control indicator

Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 1,869.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 1,869.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Gloss Test Instrument PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 1,869.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Paint Gloss Tester PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 1,869.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 1,869.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Gloss Meter PCE-IGM 60 ICA incl. ISO calibration certificate
US$ 1,861.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

NDT Test Instruments PCE-IGM 60 ICA incl. ISO calibration certificate
US$ 1,861.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Paint Gloss Tester PCE-IGM 60 ICA incl. ISO calibration certificate
US$ 1,861.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-IGM 60 ICA incl. ISO calibration certificate
US$ 1,861.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 1000 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Force Gage PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
US$ 1,856.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Force Gage is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gage PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
US$ 1,856.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gauge / Digital Force Gauge PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
US$ 1,856.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Force Gauge / Digital Force Gauge is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gauge / Digital Force Gauge PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
US$ 1,856.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tensile Tester PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
US$ 1,856.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tensile Tester is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tensile Tester PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
US$ 1,856.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tension Dynamometer / Tension Load Cell PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
US$ 1,856.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tension Dynamometer / Tension Load Cell PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
US$ 1,856.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate