Industrial Measurement Products and Solutions
Order no.: PCE-DFG N 50K-ICA
The Force Gage PCE-DFG N 50K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 50 kN / 50,000 N
- Resolution: 5 N
- Accuracy: ± 0.2% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Including ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,887.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 50K-ICA
The force gauge PCE-DFG N 50K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 50 kN / 50,000 N
- Resolution: 5 N
- Accuracy: ± 0.2% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Including ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,887.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-BTM 2000TVT-KIT
A belt tension meter measures the belt tension of a belt when it is stationary. The maintenance kit includes a vibration accelerometer for checking vibrating parts, machines and systems. It is also possible to measure the surface speed with a tachometer up to 99,999 revolutions per minute.

Belt Tension Meter
- Measurement of the vibration frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of reading + 4 digits)
Vibration Meter
- Acceleration: 0.0 ... 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 ... 3.9 mm / 0.000 - 0.154 in
Tachometer
- Contactless measurement: 5 ... 99,999 rpm
- Contact measurement: 0.5 ... 19,999 rpm
- Surface measurement: 0.05 ... 1,999.9 m/min
Manufacturer: PCE Instruments
US$ 1,881.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100-ICA

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,876.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100-ICA

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,876.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100-ICA

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU 
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,876.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LDC 8
The Gas Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Gas Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound
- Measuring principle: air, coolant, non-explosive gases
- Working frequency of 40 kHz
- up to 6 h battery operation 
- Leak detection via headphones and LCD display
- Localize leaks up to 18m, 59 ft.
Manufacturer: PCE Instruments
US$ 1,868.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LDC 8
The Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound
- Measuring principle: air, coolant, non-explosive gases
- Working frequency of 40 kHz
- up to 6 h battery operation 
- Leak detection via headphones and LCD display
- Localize leaks up to 18m, 59 ft.
Manufacturer: PCE Instruments
US$ 1,868.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LDC 8
The Ultrasonic Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound
- Measuring principle: air, coolant, non-explosive gases
- Working frequency of 40 kHz
- up to 6 h battery operation 
- Leak detection via headphones and LCD display
- Localize leaks up to 18m, 59 ft.
Manufacturer: PCE Instruments
US$ 1,868.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 1

The color meter PCE-CSM 1 was developed for quality control and offers a very high accuracy. When using the color meter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the color meter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference values easily. 6 mm aperture for sample scanning.


- CIE L*a*b*C*h, L*a*b* and XYZ
- Automatic white and black calibration
- 8°/d geometry diffused illumination integrating sphere system
- Rechargable Li-ion battery

 

Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 1

The handheld portable digital colorimeter PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily. A 6 mm aperture is used for sample scanning.


- CIE L*a*b*C*h, L*a*b* and XYZ
- Automatic white and black calibration
- 8°/d geometry diffused illumination integrating sphere system
- Rechargeable Li-ion battery

 

Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MO 3001

Electrical Tester in a robust case with a resolution of up to 1 μΩ.


- Four-wire method
- Six selectable measuring ranges
- Large LCD display
- Max. Current is 1 A
- Safety: EN 61010-1


Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TDS 75
The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy. 

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MO 3001

Microohm-Meter in a robust case with a resolution of up to 1 μΩ.


- Four-wire method
- Six selectable measuring ranges
- Large LCD display
- Max. current is 1 A
- Safety: EN 61010-1 

 

Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 1

The handheld portable digital Spectrophotometer PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the Spectrophotometer, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the Spectrophotometer, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily. A 6 mm aperture is used for sample scanning.


- CIE L*a*b*C*h, L*a*b* and XYZ
- Automatic white and black calibration
- 8°/d geometry diffused illumination integrating sphere system
- Rechargeable Li-ion battery

 

Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 1

The colorimeter PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference values easily. A 6 mm aperture is used for sample scanning.


- CIE L*a*b*C*h, L*a*b* and XYZ
- Automatic white and black calibration
- 8°/d geometry diffused illumination integrating sphere system
- Rechargeable Li-ion battery

 

Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TDS 75
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy. 

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TDS 75
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy. 

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TDS 75
The ultrasonic flow tester is a fixed installation meter. The flow rate of liquids in pipes can be determined with this ultrasonic flow tester. The sensors from the ultrasonic flow tester can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy. 

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output
Manufacturer: PCE Instruments
US$ 1,860.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: 111949

The paddle measurement system is often used as a standard system in the cosmetics and paint industry. Another field of application is food and beverage production. Even with heterogeneous products that contain solids or lumps in permeated fluids, the measurement system also can be used.

For viscosities of 1 ... 510 000 000 mPa.s

US$ 1,859.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer