- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer
- Switchable graphic view
- Application, e.g. photovoltaic systems

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.

- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 1000 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
 

 

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

 

The PCE-TG 300-P5EE is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

- Weighing range: 0 ... 1500 kg / 3306 lb
- Resolution: 0.1 kg / 0.22 lb
- Accuracy: ±0.2% of measuring range
- Fork height: 86 ... 196 mm / 3.3 x 7.7"
- Electric drive
- Speed (loaded): 4 km/h / 2.5 mph
- Speed (unloaded): 4.5 km/h / 2.8 mph
- Motor power: 450 W
- Rubber wheels
- Weight: 160 kg / 352 lb
- Note: The weighing pallet truck must be assembled after delivery.
- You can order the pallet truck scale assembled for an extra charge
   (see optional accessories)

- Weighing range: 0 ... 1500 kg / 3306 lb
- Resolution: 0.1 kg / 0.22 lb
- Accuracy: ±0.2% of measuring range
- Fork height: 86 ... 196 mm / 3.3 x 7.7"
- Electric drive
- Speed (loaded): 4 km/h / 2.5 mph
- Speed (unloaded): 4.5 km/h / 2.8 mph
- Motor power: 450 W
- Rubber wheels
- Weight: 160 kg / 352 lb
- Note: The weighing pallet truck must be assembled after delivery.
- You can order the pallet truck scale assembled for an extra charge
   (see optional accessories)

- Weighing range: 0 ... 1500 kg / 3306 lb
- Resolution: 0.1 kg / 0.22 lb
- Accuracy: ±0.2% of measuring range
- Fork height: 86 ... 196 mm / 3.3 x 7.7"
- Electric drive
- Speed (loaded): 4 km/h / 2.5 mph
- Speed (unloaded): 4.5 km/h / 2.8 mph
- Motor power: 450 W
- Rubber wheels
- Weight: 160 kg / 352 lb
- Note: The weighing pallet truck must be assembled after delivery.
- You can order the pallet truck scale assembled for an extra charge
   (see optional accessories)

The PCE-TG 300-P5EE is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

The PCE-TG 300-P5EE is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

The PCE-TG 300-P5EE is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

The PCE-TG 300-P5EE is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

The PCE-TG 300-P5EE is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

- Weighing range: 0 ... 1500 kg / 3306 lb
- Resolution: 0.1 kg / 0.22 lb
- Accuracy: ±0.2% of measuring range
- Fork height: 86 ... 196 mm / 3.3 x 7.7"
- Electric drive
- Speed (loaded): 4 km/h / 2.5 mph
- Speed (unloaded): 4.5 km/h / 2.8 mph
- Motor power: 450 W
- Rubber wheels
- Weight: 160 kg / 352 lb
- Note: The weighing pallet truck must be assembled after delivery.
- You can order the pallet truck scale assembled for an extra charge
   (see optional accessories)

- Weighing range: 0 ... 1500 kg / 3306 lb
- Resolution: 0.1 kg / 0.22 lb
- Accuracy: ±0.2% of measuring range
- Fork height: 86 ... 196 mm / 3.3 x 7.7"
- Electric drive
- Speed (loaded): 4 km/h / 2.5 mph
- Speed (unloaded): 4.5 km/h / 2.8 mph
- Motor power: 450 W
- Rubber wheels
- Weight: 160 kg / 352 lb
- Note: The weighing pallet truck must be assembled after delivery.
- You can order the pallet truck scale assembled for an extra charge
   (see optional accessories)

The PCE-TG 300-P5EE is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

The PCE-TG 300-P5EE is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

The PCE-TG 300-P5EE is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

The PCE-TG 300-P5EE is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth