Wind Speed Meter PCE-WSAC 50W 230
US$ 1,571.00
ex. VAT, ex. delivery costs
The Wind Speed Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed meter means stormy gusts can also be monitored.

  • Measuring range up to 180 km / h
  • Input: Pulse, analogue (4 … 20-mA) or radio transmission
  • 4 … 20-mA analogue output
  • Supply voltage: 110 … 230V AC, 50/60 Hz
  • Ambient temperature -20 .. . 70°C / -4 … 158°F
  • Units adjustable: km / h, mph, m / s
Wind Speed Meter PCE-WSAC 50W 24
US$ 1,571.00
ex. VAT, ex. delivery costs

The Wind Speed Meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed meter means stormy gusts can also be monitored.

  • Measuring range up to 180 km / h
  • Input: pulse, analogue (4 … 20-mA) or radio transmission
  • 4 … 20-mA analog output
  • Supply voltage: 24V DC
  • Ambient temperature -20 … 70°C / -4 … 158°F
  • units adjustable: km / h, mph, m / s

Flow Meter PCE-UFM 32PVC
US$ 1,565.00
ex. VAT, ex. delivery costs
Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN32 (35 ... 43 mm)
Heat Pump Test Equipment PCE-UFM 32PVC
US$ 1,565.00
ex. VAT, ex. delivery costs
Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN32 (35 ... 43 mm)
HVAC Meter / HVACR Tester PCE-UFM 32PVC
US$ 1,565.00
ex. VAT, ex. delivery costs
Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN32 (35 ... 43 mm)
Ultrasonic Flow Meter PCE-UFM 32PVC
US$ 1,565.00
ex. VAT, ex. delivery costs
Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Ultrasonic Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN32 (35 ... 43 mm)
Ultrasonic Tester / Ultrasonic Testing PCE-UFM 32PVC
US$ 1,565.00
ex. VAT, ex. delivery costs
Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN32 (35 ... 43 mm)
Condition Monitoring Device PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

IoT Meter PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Material Tester PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Material Thickness Meter PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

NDT Test Instrument PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Paint Thickness Tester PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Thickness Gauge PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Thickness Meter PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Ultrasonic Thickness Gauge PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Ultrasonic Thickness Tester PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Wall Thickness Meter PCE-TG 300-NO2-ICA incl. ISO calibration certificate
US$ 1,557.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO2 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth
  • incl. ISO calibration certificate