Condition Monitoring Device PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
US$ 1,488.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO5/90 is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Sensor at 90° angle
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Gas Detector Xgard Type 1 CL2
US$ 1,488.00
ex. VAT, ex. delivery costs

The Xgard-1-CL2 is a single-gas sas detector used to warn for gases (Chlorine, CL2, 0 … 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


  • Stationary
  • For (Chlorine, CL2, 0 … 5 ppm)
  • Additional display and alarm station
  • ATEX or UL approval

Gas Leak Detector Xgard Type 1 CL2
US$ 1,488.00
ex. VAT, ex. delivery costs

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL2, 0 … 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

  • Stationary
  • For (Chlorine, CL2, 0 … 5 ppm)
  • Additional display and alarm station
  • ATEX or UL approval

IoT Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
US$ 1,488.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO5/90 is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Sensor at 90° angle
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Material Tester PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
US$ 1,488.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO5/90 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Sensor at 90° angle
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Material Thickness Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
US$ 1,488.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO5/90 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Sensor at 90° angle
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

NDT Test Instrument PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
US$ 1,488.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO5/90 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Sensor at 90° angle
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Paint Thickness Tester PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
US$ 1,488.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO5/90 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Sensor at 90° angle
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth
  • incl. ISO calibration certificate

Thickness Gauge PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
US$ 1,488.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO5/90 is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Sensor at 90° angle
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth
  • incl. ISO calibration certificate