Force Gage PCE-DFG 1000 X-ICA incl. ISO-Calibration Certificate
US$ 1,424.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 ... 1000 N
  • Resolution: 0.5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gauge / Digital Force Gauge PCE-DFG 1000 X-ICA incl. ISO-Calibration Certificate
US$ 1,424.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 ... 1000 N
  • Resolution: 0.5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tensile Tester PCE-DFG 1000 X-ICA incl. ISO-Calibration Certificate
US$ 1,424.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 ... 1000 N
  • Resolution: 0.5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tension Dynamometer / Tension Load Cell PCE-DFG 1000 X-ICA incl. ISO-Calibration Certificate
US$ 1,424.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 ... 1000 N
  • Resolution: 0.5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Condition Monitoring Ultrasonic Material Thickness Meter PCE-TG 150A HT-ICA incl. ISO-calibration certificate
US$ 1,422.00
ex. VAT, ex. delivery costs
ISO Calibration
The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

  • Measuring range (with sensor): 1.20 … 300.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of the weight. + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • High temperature probe: -10 … 350 °C
    - incl. ISO-calibration certificate
Durometer PCE-2000N-ICA incl. ISO calibration certificate
US$ 1,422.00
ex. VAT, ex. delivery costs
ISO Calibration
The PCE Instruments PCE-2000N durometer uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
  • Incl. ISO calibration certificate
Hardness Tester PCE-2000N-ICA incl. ISO calibration certificate
US$ 1,422.00
ex. VAT, ex. delivery costs
ISO Calibration
The PCE Instruments PCE-2000N hardness tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
  • Incl. ISO calibration certificate
HVAC Meter PCE-TG 150A HT-ICA incl. ISO-calibration certificate
US$ 1,422.00
ex. VAT, ex. delivery costs
ISO Calibration
The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

  • Measuring range (with sensor): 1.20 … 300.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of the weight. + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • High temperature probe: -10 … 350 °C
    - incl. ISO-calibration certificate
Material Tester PCE-2000N-ICA incl. ISO calibration certificate
US$ 1,422.00
ex. VAT, ex. delivery costs
ISO Calibration
The PCE Instruments PCE-2000N material tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
  • Incl. ISO calibration certificate