Order no.: PCE-DFG NF 0.5K
The dynamometer PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs
- Resolution: 0.05 N / 0.01 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 1K
The dynamometer PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs
- Resolution: 0.1 N / 0.02 lbs
- Accuracy: ±0.5 % of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 5K
The dynamometer PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs
- Resolution: 0.5 N / 0.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 0.5K
The force gauge PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs
- Resolution: 0.05 N / 0.01 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 1K

The force gauge PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation. 


- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs
- Resolution: 0.1 N / 0.02 lbs
- Accuracy: ±0.5 % of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 5K
The force gauge PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs
- Resolution: 0.5 N / 0.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,211.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,211.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SGM 60-ICA
The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,211.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-IS+O2

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,207.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-IS+O2

The TXgard-IS+O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,207.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-IS+O2

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,207.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 360N

PCE-VE 360N is a small-diameter automotive tester, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

Manufacturer: PCE Instruments
US$ 1,205.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 360N

PCE-VE 360N is a small-diameter industrial borescope or borescope camera for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head of this kind of borescope features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

Manufacturer: PCE Instruments
US$ 1,205.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SW 5000N

PCE-SW 5000N is a portable battery-powered industrial scale or floor scale featuring two heavy-duty parallel weighing beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the scale's stainless-steel-encased display can be placed up to 4 m / 13 ft away from the weighing beams, allowing for wall mounting.


- Weighing capacity: 5000 kg / 11023 lb (=5.5 T)
- Weighing units: kilograms (kg) or pounds (lbs)
- Resolution: 2 kg
- Accuracy: ± 8 kg
- Bi-directional RS-232 interface


Manufacturer: PCE Instruments
US$ 1,205.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 360N

PCE-VE 360N is a small-diameter inspection camera, borescope or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

Manufacturer: PCE Instruments
US$ 1,205.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SW 5000N

PCE-SW 5000N is a portable battery-powered industrial pallet scale or floor scale featuring two heavy-duty parallel weighing beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the scale's stainless-steel-encased display can be placed up to 4 m / 13 ft away from the weighing beams, allowing for wall mounting.


- Weighing capacity: 5000 kg / 11023 lb (=5.5 T)
- Weighing units: kilograms (kg) or pounds (lbs)
- Resolution: 2 kg
- Accuracy: ± 8 kg
- Bi-directional RS-232 interface


Manufacturer: PCE Instruments
US$ 1,205.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 360N

PCE-VE 360N is a small-diameter snake camera, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial snake camera is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof snake camera head features 3 LED lights with automatic illumination.

 

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"
Manufacturer: PCE Instruments
US$ 1,205.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 360N

The Video Fiberscope PCE-VE 360N is the ideal tool for professional, technical, maintenance and development. The Video Fiberscope also allows you to visualize the interior of installations and machinery without the need to disassemble them, to take pictures and video clips of the parts to check and to in the Video Borescope and then transfer them to your PC.


- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

Manufacturer: PCE Instruments
US$ 1,205.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 360N

PCE-VE 360N is a small-diameter videoscope, video borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

Manufacturer: PCE Instruments
US$ 1,205.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer