Query results | PCE Instruments

Automotive Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate

Car Measuring Device PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

Coating Thickness Gauge PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

Digital Force Gauge PCE-DFG 1K X

US$ 1,366.00

ex. VAT, ex. delivery costs

The digital force gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The digital force gauge is supplied with an external measuring cell and can measure forces of up to 1,000 N.

- Measuring range: 0 ... 1000 N

- Resolution: 0.5 N

- Accuracy: ±0.05 % rdg.
- Measuring rate: 1 .... 7,200 Hz

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

Dynamometer PCE-DFG 2K5 X

US$ 1,366.00

ex. VAT, ex. delivery costs

The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 2,500 N.

- Measuring range: 0 ... 2500 N

- Resolution: 1 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7,200 Hz

Dynamometer PCE-DFG 2K5 X

US$ 1,366.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 2500 N

- Resolution: 1 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7,200 Hz

Force Gage PCE-DFG 1K X

US$ 1,366.00

ex. VAT, ex. delivery costs

The force gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The force gauge is supplied with an external measuring cell and can measure forces of up to 1,000 N.

- Measuring range: 0 ... 1000 N

- Resolution: 0.5 N

- Accuracy: ±0.05 % rdg.
- Measuring rate: 1 .... 7,200 Hz

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

Force Gage PCE-DFG N 1K

US$ 1,366.00

ex. VAT, ex. delivery costs

The PCE-DFG N 1K force gage measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Force Gage PCE-DFG N 2.5K

US$ 1,366.00

ex. VAT, ex. delivery costs

The PCE-DFG N 2.5K force gage measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch.

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Force Gauge PCE-DFG N 1K

US$ 1,366.00

ex. VAT, ex. delivery costs

The PCE-DFG N 1K force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Force Gauge PCE-DFG N 2.5K

US$ 1,366.00

ex. VAT, ex. delivery costs

The PCE-DFG N 2.5K force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch.

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Material Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Material Thickness Meter PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

Paint Gauge PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

Paint Thickness Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Surface Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

Thickness Gauge PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

Thickness Meter PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,366.00

ex. VAT, ex. delivery costs

The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.