Order no.: PCE-IR 31

PCE-IR 31 is a non-contact digital infrared thermometer or temperature meter for high-temperature applications. Made of stainless steel and designed for use in harsh industrial conditions, the temperature meter features an IP 65 rating. The device measures infrared radiation and converts it into an analog and switching signal. The switching signal can be used as an opener or closer. In addition, the temperature meter shows the measured value on the built-in LED screen.


- Measuring range: 0 ... 1000°C / 32 ... 1832°F
- M12 thread 5-pin connection
- Quick response time


Manufacturer: PCE Instruments
US$ 1,144.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 5K
The dynamometer PCE DFG N 5K measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch. You can buy the dynamometer PCE-DFG N 5K here in our online shop. 

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,143.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 5K
The force gauge PCE DFG N 5K measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch. You can buy the force gauge PCE-DFG N 5K here in our online shop. 

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,143.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU

 

Manufacturer: PCE Instruments
US$ 1,137.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PGM 100

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU 

 

Manufacturer: PCE Instruments
US$ 1,137.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-IR-2

The Xgard-IR-2 is a single-gas Gas Leak Detector used to warn for gases (Carbon Dioxide, CO2, 0 ... 2 %), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Dioxide, CO2, 0 ... 5 %)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,136.80

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-IR-3

The Xgard-IR-3 is a single-gas Gas Leak Detector used to warn for gases (Inflammable Gases, 0 ... 100 % LEL), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Inflammable Gases, 0 ... 100 % LEL)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,136.80

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500-ICA

PCE-2500-ICA is a portable, handheld, pen-sized, digital material hardness tester, rebound hammer or durometer for use with metals. This metal hardness tester quickly and accurately measures 10 common metal materials including steel / cast steel, alloy tool steel, stainless steel, lamellar iron, nodular iron, cast aluminum, brass, bronze, wrought copper and forging steel.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS, σb
- Measurement ranges: HL 170-960, HRA 30-88, HRB 13-109, HRC 17-70, HB 20-665, HV 80-940, HS 32- 99.5, σb(rm) 255-2639N/mm2
- Accuracy: ± 0.3%, Repeatability: ± 0.3%
- Internal type D rebound mechanism
- Memory size: 360,000 values
- LED display
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,130.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500-ICA

PCE-2500-ICA is a portable, handheld, pen-sized, digital metal hardness tester, rebound hammer or durometer. This hardness tester quickly and accurately measures 10 common metal materials including steel / cast steel, alloy tool steel, stainless steel, lamellar iron, nodular iron, cast aluminum, brass, bronze, wrought copper and forging steel.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS, σb
- Measurement ranges: HL 170-960, HRA 30-88, HRB 13-109, HRC 17-70, HB 20-665, HV 80-940, HS 32- 99.5, σb(rm) 255-2639N/mm2
- Accuracy: ± 0.3%, Repeatability: ± 0.3%
- Internal type D rebound mechanism
- Memory size: 360,000 values
- LED display
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,130.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500-ICA

PCE-2500-ICA is a portable, handheld, pen-sized, digital metal hardness tester, rebound hammer or durometer. This hardness tester quickly and accurately measures 10 common metal materials including steel / cast steel, alloy tool steel, stainless steel, lamellar iron, nodular iron, cast aluminum, brass, bronze, wrought copper and forging steel.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS, σb
- Measurement ranges: HL 170-960, HRA 30-88, HRB 13-109, HRC 17-70, HB 20-665, HV 80-940, HS 32- 99.5, σb(rm) 255-2639N/mm2
- Accuracy: ± 0.3%, Repeatability: ± 0.3%
- Internal type D rebound mechanism
- Memory size: 360,000 values
- LED display
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,130.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500-ICA

PCE-2500-ICA is a portable, handheld, pen-sized, digital metal hardness tester, rebound hammer or durometer. This hardness tester quickly and accurately measures 10 common metal materials including steel / cast steel, alloy tool steel, stainless steel, lamellar iron, nodular iron, cast aluminum, brass, bronze, wrought copper and forging steel.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS, σb
- Measurement ranges: HL 170-960, HRA 30-88, HRB 13-109, HRC 17-70, HB 20-665, HV 80-940, HS 32- 99.5, σb(rm) 255-2639N/mm2
- Accuracy: ± 0.3%, Repeatability: ± 0.3%
- Internal type D rebound mechanism
- Memory size: 360,000 values
- LED display
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,130.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: ZXCON

ZXCON is a consistometer / viscometer used to measure flow rate, viscosity or consistency by Bostwick method. Designed for conducting quick and accurate Bostwick tests of liquids and pastes for compliance with MIL-R-81294D and ASTM F1080-93, this consistometer features:


- Scale length of 240 mm
- 75 ml sample size acceptance
- Built-in level and leveling feet
- Engraved 0.5 cm graduations
- Durable, stainless steel construction
- Spring-loaded gate that prevents premature flow

 

Manufacturer: ENDECOTTS LIMITED
US$ 1,125.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-1-SO2

The Xgard-1-SO2 is a single-gas Gassensor used to warn for gases (Sulfur Dioxide, SO2, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO2, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,125.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-1-SO2

The Xgard-1-SO2 is a single-gas Gas Leak Detector used to warn for gases (Sulfur Dioxide, SO2, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO2, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,125.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428

PCE-428 is a class 2 data logging sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. The sound level meter calculates the equivalent continuous sound level Leq (LXeq).

- Measuring range: 25 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
US$ 1,112.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428

PCE-428 is a class 2 data-logging decibel meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.

- Measuring range: 25 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
US$ 1,112.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428

PCE-428 is a class 2 data-logging noise dose meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.

- Measuring range: 25 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
US$ 1,112.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428

PCE-428 is a class 2 data-logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.

- Measuring range: 25 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
US$ 1,112.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428

PCE-428 is a class 2 data-logging sound pressure level (SPL) meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the SPL numerically and graphically in real time.

- Measuring range: 25 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
US$ 1,112.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428

The Data Logger PCE-428 is a class 2 data logging sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy data logger has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. The data logger calculates the equivalent continuous sound level Leq (LXeq).

- Measuring range: 25 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
US$ 1,112.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer