NDT Test Instruments PCE-PGM 60-ICA incl. ISO calibration certificate
US$ 1,315.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


  • Measuring geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate
  • Includes PC-compatible software for detailed analysis

NDT Tester - Hardness Tester PCE-HT 224E with Digital Display
US$ 1,315.00
ex. VAT, ex. delivery costs
Wireless
The NDT Tester is a measuring tool for testing the strength of concrete. The NDT Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the NDT Tester.  The NDT Tester is also suitable for measuring hardness of rolled paper.  The NDT Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

  • Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Digital Display of results
  • USB interface for connection to a PC
  • Data storage
  • Rechargeable battery
Paint Gloss Tester PCE-PGM 60-ICA incl. ISO calibration certificate
US$ 1,315.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


  • Measuring geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate
  • Includes PC-compatible software for detailed analysis

Surface Tester PCE-HT 224E with Digital Display
US$ 1,315.00
ex. VAT, ex. delivery costs
Wireless
The Surface Tester is a measuring tool for testing the strength of concrete. The Surface Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Surface Tester.  The Surface Tester is also suitable for measuring hardness of rolled paper.  The Surface Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

  • Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Digital Display of results
  • USB interface for connection to a PC
  • Data storage
  • Rechargeable battery
Surface Testing - Gloss Meter PCE-PGM 60-ICA incl. ISO calibration certificate
US$ 1,315.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-PGM 60 Surface Testing has a measuring geometry of 60°. The Surface Testing is used to analyze surfaces of different materials. Gloss measurements are particularly carried out in the production industry where products must have exactly the same characteristics.


  • Measurement geometry: 60° degree angle
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Measuring range: 0 … 300 GU
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate
  • Includes PC-compatible software for detailed analysis

Absolute Moisture Meter FMD 6
US$ 1,313.00
ex. VAT, ex. delivery costs

The FMD 6 is a handy and versatile absolute moisture meter for reliable measurement of the moisture content of paper, wood and construction materials. The absolute moisture meter has preset characteristic curves for the moisture measurement of specific materials. The moisture meter needs external sensors (sold separately - please see accessory list) to operate.The sensors can be positioned on the surface of a material or inserted into a material, thereby permitting either non-destructive or destructive measurement.


  • Measuring range: 5-99% for wood / 0-99% for building materials
  • Resolution: 0.1%
  • Accuracy: ±0.2%
  • Memory stores up to 1,000 measurement values for transfer to PC using  included software

Building Moisture Meter FMD 6
US$ 1,313.00
ex. VAT, ex. delivery costs

The building moisture meter is a handy and versatile absolute moisture meter for reliable measurement of the moisture content of paper, wood and construction materials. The building moisture meter has preset characteristic curves for the moisture measurement of specific materials. The building moisture meter needs external sensors (sold separately - please see accessory list) to operate.The sensors can be positioned on the surface of a material or inserted into a material, thereby permitting either non-destructive or destructive measurement.


  • Measuring range: 5-99% for wood / 0-99% for building materials
  • Resolution: 0.1%
  • Accuracy: ±0.2%
  • Memory stores up to 1,000 measurement values for transfer to PC using  included software

Coating Thickness Gauge PCE-CT 80HP-FN0D5
US$ 1,313.00
ex. VAT, ex. delivery costs
The material tester can reliably determine the thicknessHigh Accuracy of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the material tester covers a wide range of measuring tasks.

  • Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
  • Accuracy after foil calibration: ±(1.0 % of measured value + 0.5 µm)
  • Data memory for 2000 readings
  • Fe substrates such as: steel and iron
  • NFe substances such as: aluminum and copper
  • Practical V-groove on the measuring heads
Coating Thickness Gauge PCE-CT 80HP-FN3
US$ 1,313.00
ex. VAT, ex. delivery costs
The material thickness meter can reliably determine the thicknessHigh Accuracy of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the material thickness meter covers a wide range of measuring tasks.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
  • Data memory for 2000 readings
  • Fe substrates such as: steel and iron
  • NFe substances such as: aluminum and copper
  • Practical V-groove on the measuring heads