The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Incl. ISO calibration certificate

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Incl. ISO calibration certificate

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

The TXgard-IS+O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

 

PCE-VE 360N is a small-diameter automotive tester, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

PCE-VE 360N is a small-diameter industrial borescope or borescope camera for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head of this kind of borescope features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

PCE-VE 360N is a small-diameter inspection camera, borescope or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

PCE-SW 5000N are portable battery-powered industrial pallet beams or floor scales featuring two heavy-duty parallel weighing beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the scale's stainless-steel-encased display can be placed up to 4 m / 13 ft away from the pallet beams, allowing for wall mounting.

- Weighing capacity: 5000 kg / 11023 lb (=5.5 T)
- Weighing units: kilograms (kg) or pounds (lbs)
- Resolution: 2 kg
- Accuracy: ± 8 kg
- Bi-directional RS-232 interface 

PCE-VE 360N is a small-diameter snake camera, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial snake camera is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof snake camera head features 3 LED lights with automatic illumination.

 

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

The Video Fiberscope PCE-VE 360N is the ideal tool for professional, technical, maintenance and development. The Video Fiberscope also allows you to visualize the interior of installations and machinery without the need to disassemble them, to take pictures and video clips of the parts to check and to in the Video Borescope and then transfer them to your PC.

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

PCE-VE 360N is a small-diameter videoscope, video borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.

- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 1000 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457 
- Incl. ISO calibration certificate

PCE-950-ICA is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: 2% / Repeatability: 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
- Includes ISO calibration certificate

PCE-950-ICA is a handheld metal hardness durometer used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: 2% / Repeatability: 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
- Includes ISO calibration certificate

PCE-950-ICA is a handheld metal hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: 2% / Repeatability: 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
- Includes ISO calibration certificate

PCE-950-ICA is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: 2% / Repeatability: 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
- Includes ISO calibration certificate

This multiposition magnetic stirrer is particularly suitable for a series examination. The 10 synchronously rotating stirring points of the magnetic stirrer ensure the reproducibility of the results. The stirring speed of the magnetic stirrer can be set between 300 and 1500 revolutions per minute in steps of 10.

- Number of stirring points: 10
- Stirring quantity: 400 ml per stirring point
- Stirring speed: 300 ... 1500 rpm
- Timer and pulse function
- Change of direction: automatic
- Stainless steel platform