Order no.: HM-BP1

This Timber Moisture Meter HM-BP1 meter has been developed to measure moisture in wood pellets quickly and accurately.


- Robust and stainless casing
- Automatic temperature compensation
- Sample material temperature measurement
- Temperature switchable between °C and °F
- Interference-free measurement method

Manufacturer: Messtechnik Schaller GmbH
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VMS 501

The wireless PCE-VMS 501 Vibration Analyzer Sensor detects vibration within an acceleration range of up to 30 g and a frequency range between 5 and 10 KHz. The wireless vibration sensor, which measures vibrations at machines to transfer those wireless vibrations to a receiving unit.


- Acceleration range: up to 300 m/s2
- Wireless communication via ZigBee
- Frequency range between 5 Hz and 10 kHz
- Wireless transferring Piezo sensors
- Transmission rate of 1 minute per sensor

 

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VMS 501

The wireless PCE-VMS 501 Vibration Meter Sensor detects vibration within an acceleration range of up to 30 g and a frequency range between 5 and 10 KHz. The wireless vibration sensors, which measures vibrations at machines to transfer those wireless vibrations to a receiving unit.


- Acceleration range: up to 300 m/s2
- Wireless communication via ZigBee
- Frequency range between 5 Hz and 10 kHz
- Wireless transferring Piezo sensors
- Transmission rate of 1 minute per sensor

 

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HM-BP1

This Wood Moisture Meter HM-BP1 has been developed to measure moisture in wood pellets quickly and accurately. The use of the Wood Moisture Meter HM-BP1 for wood pellets is important for using only wood pellets which burn with low emissions (soot-free) in addition to their high calorific value (type of wood).


- Robust and stainless casing
- Automatic temperature compensation
- Sample material temperature measurement
- Temperature switchable between °C and °F
- Interference-free measurement method

Manufacturer: Messtechnik Schaller GmbH
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSM 100
The camera microscope PCE-WMS 100 is the ideal aid for repair and service workshops. Thanks to the movable camera arm, the camera can be precisely aligned by the camera microscope on the object to be optically examined.

- Resolution: 2304 x 1536 pixels
- Magnification: 4.8x ... 220x
- Light source: LED ring light
- Full-HD resolution
- HDMI & USB interface
- SD memory to 64 GB
Manufacturer: PCE Instruments
US$ 1,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 Industrial Endoscope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m telescopic rod of the industrial endoscope, it is also possible to view areas that are difficult to access. Visual monitoring with the industrial endoscope is supported by the flexible camera head.


- flexible camera head
- 8" LCD monitor
- up to three meters long
- diameter of the camera: 23 mm / 0.9 in
- memory function

Manufacturer: PCE Instruments
US$ 1,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 industrial borescope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft telescopic rod of the borescope, it is also possible to view areas that are difficult to access. Visual monitoring with the borescope is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
US$ 1,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSM 100
The Inspection Camera PCE-WMS 100 is the ideal aid for repair and service workshops. Thanks to the movable camera arm, the camera can be precisely aligned by the inspection camera on the object to be optically examined.

- Resolution: 2304 * 1536 pixels
- Magnification: 4.8x ... 220x
- Light source: LED ring light
- Full-HD resolution
- HDMI & USB interface
- SD memory to 64 GB
Manufacturer: PCE Instruments
US$ 1,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft  telescopic rod of the inspection camera, it is also possible to view areas that are difficult to access. Visual monitoring with the inspection camera is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
US$ 1,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IVE 330

The PCE-IVE 330 videoscope or inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft telescopic rod of the videoscope, it is also possible to view areas that are difficult to access. Visual monitoring with the videoscope is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
US$ 1,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HFX205

This Air Quality Meter is designed to detect formaldehyde in air. The Air Quality Meter shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The formaldehyde Air Quality Meter runs with the help of an electromechanical sensor and is designed to determine the current permitted limit.


- Measuring range: 0 … 10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HFX205

This Formaldehyde Meter HFX205 is designed to detect formaldehyde in air. The Formaldehyde Meter HFX205 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Meter HFX205 runs with the help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Range Formaldehyde: 0…10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HFX205

This Gas Leak Detector is designed to detect formaldehyde in air. The Gas Leak Detector shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The formaldehyde Gas Leak Detector runs with the help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Measuring range: 0…10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TETRA-MINI

TETRA-MINI alerts the user acoustically, visually and vibrationally to the presence of flammable gases (CH4), oxygen (O2), hydrogen sulfide (H2S) and carbon monoxide (CO). Furthermore, this unpumped four-gas meter displays the current measured value on its graphic LCD screen with backlight. Other gas sensors are available for this instrument. Call for details.


- Sensor types: CH4 / H2S / CO / O2
- Easy one-button operation
- Rechargeable Li-ion battery
- ATEX II 2G EEx iad IIC T4 approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,219.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TETRA-MINI

TETRA-MINI alerts the user acoustically, visually and vibrationally to the presence of flammable gases (CH4), oxygen (O2), hydrogen sulfide (H2S) and carbon monoxide (CO). Furthermore, this unpumped four-gas meter displays the current measured value on its graphic LCD screen with backlight. Other gas sensors are available for this instrument. Call for details.


- Sensor types: CH4 / H2S / CO / O2
- Easy one-button operation
- Rechargeable Li-ion battery
- ATEX II 2G EEx iad IIC T4 approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,219.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 0.5K
The dynamometer PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs
- Resolution: 0.05 N / 0.01 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 1K
The dynamometer PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs
- Resolution: 0.1 N / 0.02 lbs
- Accuracy: ±0.5 % of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 5K
The dynamometer PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs
- Resolution: 0.5 N / 0.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 0.5K
The force gauge PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs
- Resolution: 0.05 N / 0.01 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 1K

The force gauge PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation. 


- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs
- Resolution: 0.1 N / 0.02 lbs
- Accuracy: ±0.5 % of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer