Order no.: AQ-200 Set OZU

Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)

 

Manufacturer: Aeroqual
US$ 1,075.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-200 Set OZU

Ozone Meter AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)

 

Manufacturer: Aeroqual
US$ 1,075.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-1-Cl2

The Xgard-1-CL2 is a single-gas Gas detector used to warn for gases (Chlorine, CL2, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Chlorine, CL2, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,070.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-1-CL2

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL2, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL2, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,070.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 10

The Material Surface Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.02 to 100um / 3.93 µinch ... 1968.50 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)

Manufacturer: PCE Instruments
US$ 1,069.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 10

The Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.1 to 50um / 3.93 µinch ... 1968.50 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)

Manufacturer: PCE Instruments
US$ 1,069.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 10

The Surface Profilometer PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.1 to 50um / 3.93 µinch ... 1968.50 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)
Manufacturer: PCE Instruments
US$ 1,069.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 10

The Surface Testing Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.1 to 50um / 3.93 µinch ... 1968.50 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)

Manufacturer: PCE Instruments
US$ 1,069.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PMP
PMP is a portable handheld moisture analyzer used to take quick, accurate, nondestructive measurements of the moisture or water content and temperature of paper products. Ideal for stacks and rolls of paper products. Minimum material thickness is 25 mm or 1-inch.

- Moisture content range: 1 ... 15%
- Temperature range: 0 ... +50 °C / +32 ... +122 °F
- Resolution: 0.1%
- Measuring depth 20 mm / 0.8"
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 1,064.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PMP
PMP is a portable handheld moisture meter used to take quick, accurate, nondestructive measurements of the moisture or water content and temperature of paper products. Ideal for stacks and rolls of paper products. Minimum material thickness is 25 mm or 1-inch.

- Moisture content range: 1 ... 15%
- Temperature range: 0 ... +50 °C / +32 ... +122 °F
- Resolution: 0.1%
- Measuring depth 20 mm / 0.8"
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 1,064.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PMP
PMP is a portable handheld moisture meter used to take quick, accurate, nondestructive measurements of the moisture or water content and temperature of paper products. Ideal for stacks and rolls of paper products. Minimum material thickness is 25 mm or 1-inch.

- Moisture content range: 1 ... 15%
- Temperature range: 0 ... +50 °C / +32 ... +122 °F
- Resolution: 0.1%
- Measuring depth 20 mm / 0.8"
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 1,064.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDM 3WI-ICA

The PCE-DDM 3WI-ICA Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3WI-ICA Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control / indicator
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 1,062.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62-ICA

This clamp meter is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The clamp meter is equipped with data logger. The test instrument is delivered manufacturer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Datalogger for 50,000 readings / software/ USB interface 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 1,058.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62-ICA

This clamp on tester is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The clamp on tester is equipped with data logger. The test instrument is delivered manufacturer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Datalogger for 50,000 readings / software/ USB interface 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 1,058.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62-ICA

This current clamp is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The current clamp is equipped with data logger. The test instrument is delivered manufacturer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Datalogger for 50,000 readings / software/ USB interface 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 1,058.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62-ICA

This HVAC meter is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The HVAC meter is equipped with data logger. The test instrument is delivered manufacturer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Datalogger for 50,000 readings / software/ USB interface 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 1,058.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62-ICA

This 1-Phase-Power Meter is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The power analyzer clamp is equipped with data logger. The test instrument is delivered manufacturer ISO calibrated.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records
incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 1,058.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62-ICA

This power analyzer is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The power analyzer clamp is equipped with data logger. The test instrument is delivered manufacturer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Datalogger for 50,000 readings / software/ USB interface 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 1,058.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62-ICA

This power datalogger is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The power analyzer clamp is equipped with data logger. The test instrument is delivered manufacturer ISO calibrated.

- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Datalogger for 50,000 readings / software/ USB interface 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 1,058.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HOMMEL ETAMIC P5
The optional mobile, wireless printer HOMMEL-ETAMIC P5 will allow you to print your measured data directly and wirelessly. The mobile roughness tester Hommel Etamic W5 can be easily connected to the printer through the Bluetooth interface.
Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
US$ 1,058.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer