Industrial Measurement Products and Solutions
Order no.: MSR165-

The bestseller for transportation monitoring, fault diagnoses and load tests! The robust MSR165 Accelerometer is capable of making 1600 acceleration (shock, vibrations) measurements per second in all three axes. Shock monitoring with this Accelerometer is possible up to ±15 g or up to ±200 g, 32 measurement values are recorded even before the event takes place.


- Possible test parameters: temperature, humidity, pressure, 3-axis
  acceleration and light
- Measurement/storage rate: up to 1600/s
- The logger records over 2 000 000 measured data - with an
  optional microSD card, even over a billion
- Parameters, sensors, etc. can be selected (Configurator)

Manufacturer: MSR Electronics GmbH
US$ 1,257.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Gas-Pro-1

This gas detector Gas-Pro-1 can gauge with its sensors a maximum of four different gases. Because of this versatility, the gas detector Gas-Pro-1 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.


- Purpose: Personal protection
- Sensor type: CO / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,249.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428-Kit

The PCE-428-KIT Sound Level Meter Kit is commonly used by professionals to ensure compliance with environmental noise regulations and workplace noise permissible exposure limits. The sound level meter also functions as a data logger, recording measurements at an adjustable interval from 1 s ... 24 h and storing the recorded measurement data to a micro SD card memory. Alternatively, the sound level meter can be connected directly to a PC via USB.

- Class 2
- Measuring range: 25 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Kit includes factory calibration certificates (per ISO 9001) and a type 2 / class 2 acoustic calibrator (PCE-SC 42)

Manufacturer: PCE Instruments
US$ 1,245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428-Kit

PCE-428-KIT is a class 2 data-logging condition monitoring noise meter kit that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.

- Measuring range: 25 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Kit includes factory calibration certificates (per ISO 9001) and a type 2 / class 2 acoustic calibrator (PCE-SC 42)

Manufacturer: PCE Instruments
US$ 1,245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428-Kit

PCE-428-KIT is a class 2 data-logging noise meter / sound meter kit that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.

- Measuring range: 25 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Kit includes factory calibration certificates (per ISO 9001) and a type 2 / class 2 acoustic calibrator (PCE-SC 42)

Manufacturer: PCE Instruments
US$ 1,245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-428-Kit

PCE-428-KIT is a class 2 sound data logger kit that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.

- Measuring range: 25 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Kit includes factory calibration certificates (per ISO 9001) and a type 2 / class 2 acoustic calibrator (PCE-SC 42)

Manufacturer: PCE Instruments
US$ 1,245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VMS 501

The wireless PCE-VMS 501 Vibration Sensor detects vibration within an acceleration range of up to 30 g and a frequency range between 5 and 10 KHz. The wireless vibration sensors, which measures vibrations at machines to transfer those wireless vibrations to a receiving unit.


- Acceleration range: up to 300 m/s2
- Wireless communication via ZigBee
- Frequency range between 5 Hz and 10 kHz
- Wireless transferring Piezo sensors
- Transmission rate of 1 minute per sensor

 

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDM 5

The PCE-DDM 5 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 5 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

 

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HM-BP1

This Damp Meter HM-BP1 has been developed to measure moisture in wood pellets quickly and accurately.


- Robust and stainless casing
- Automatic temperature compensation
- Sample material temperature measurement
- Temperature switchable between °C and °F
- Interference-free measurement method

Manufacturer: Messtechnik Schaller GmbH
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 2K
The dynamometer PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs
- Resolution: 0.2 N / 0.04 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDM 5

The PCE-DDM 5 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 5 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 2K
The force gauge PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs
- Resolution: 0.2 N / 0.04 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDM 5

The PCE-DDM 5 Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2600N

The Material Hardness Tester for Metal PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N to determine the surface hardness of many metals. The material tester PCE-2600N is especially suitable for quality or product inspection.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.8%
- Impactor: DL
- Display: 128 x 64 OLED

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2600N

The Material Hardness Tester for Metal PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N to determine the surface hardness of many metals. The material tester PCE-2600N is especially suitable for quality or product inspection.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.8%
- Impactor: DL
- Display: 128 x 64 OLED

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2600N

The Metal Hardness Testing Durometer PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the durometer PCE-2600N to determine the surface hardness of many metals. The durometer PCE-2600N is especially suitable for quality or product inspection.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.8%
- Impactor: DL
- Display: 128 x 64 OLED

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HM-BP1

This moisture device HM-BP1 has been developed to measure moisture in wood pellets quickly and accurately.


- Robust and stainless casing
- Automatic temperature compensation
- Sample material temperature measurement
- Temperature switchable between °C and °F
- Interference-free measurement method

Manufacturer: Messtechnik Schaller GmbH
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IGM 60

The NDT tester or gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HM-BP1

This pellet moisture analyzer HM-BP1 has been developed to measure moisture in wooden pellets quickly and accurately. The use of the moisture analyzer HM-BP1 for wood pellets is important for using only wooden pellets which burn with low emissions (soot-free) and in addition to their high calorific value (type of wood) can better be used at certain moisture contents. Very important for companies which burn higher amounts is to measure the moisture content for doing payments for wooden pcs instead of paying for water.


- Robust and stainless casing
- Automatic temperature compensation
- Sample material temperature measurement
- Temperature switchable between °C and °F
- Interference-free measurement method

Manufacturer: Messtechnik Schaller GmbH
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDM 5

The Tension Dynamometer PCE-DDM 5 is the ideal tool for weighing big loads and for measuring strong tensile forces. The Tension Dynamometer PCE-DDM 5 is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

 

Manufacturer: PCE Instruments
US$ 1,236.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer