The industrial borescope has a 1.2 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this industrial borescope. The camera head of this industrial borescope can move freely in 4 directions.

• Cable / head diameter: 2 mm
• Direction of movement camera head: 4-way
• Camera head length: 7 mm
• Bending radius: 6 mm
• 1.2 m / 3.9 ft endoscope cable
• 5" monitor
• Image and video memory
• IP58 camera cable
• 400 x 400 pixel image resolution

• water activity: 0 ... 1 aw
• resolution: 0.0001 aw
• accuracy: ±0.01 aw (10 ... 30 °C)
• temperature: -10 ... +50 °C
• external measuring cell
• up to 4 aw sensors simultaneously
• integrated printer
• memory: 65535 data records per channel
• real-time display of the measurement curve
• 7" LC touch display
• incl. software
• incl. 4 sensors

• torque: 0.1 ... 2000 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

• water activity: 0 ... 1 aw
• resolution: 0.0001 aw
• accuracy: ±0.01 aw (10 ... 30 °C)
• temperature: -10 ... +50 °C
• external measuring cell
• up to 4 aw sensors simultaneously
• integrated printer
• memory: 65535 data records per channel
• real-time display of the measurement curve
• 7" LC touch display
• incl. software
• incl. 4 sensors

• water activity: 0 ... 1 aw
• resolution: 0.0001 aw
• accuracy: ±0.01 aw (10 ... 30 °C)
• temperature: -10 ... +50 °C
• external measuring cell
• up to 4 aw sensors simultaneously
• integrated printer
• memory: 65535 data records per channel
• real-time display of the measurement curve
• 7" LC touch display
• incl. software
• incl. 4 sensors

• water activity: 0 ... 1 aw
• resolution: 0.0001 aw
• accuracy: ±0.01 aw (10 ... 30 °C)
• temperature: -10 ... +50 °C
• external measuring cell
• up to 4 aw sensors simultaneously
• integrated printer
• memory: 65535 data records per channel
• real-time display of the measurement curve
• 7" LC touch display
• incl. software
• incl. 4 sensors

• water activity: 0 ... 1 aw
• resolution: 0.0001 aw
• accuracy: ±0.01 aw (10 ... 30 °C)
• temperature: -10 ... +50 °C
• external measuring cell
• up to 4 aw sensors simultaneously
• integrated printer
• memory: 65535 data records per channel
• real-time display of the measurement curve
• 7" LC touch display
• incl. software
• incl. 4 sensors

The PCE-830 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm diameter / 2.2 in
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
• Incl. ISO calibration certificate

• torque: 0.01 ... 500 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Diameter: Ø2.2mm / 0.08"
• Cable length: 1m / 3.2 ft
• Camera direction: 90°
• Resolution: 160,000 pixels
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

PCE-5000 is a portable material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

• Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
• Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
• Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
• Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
• Memory size: 1,000 groups for measurement data and 20 groups for calibration data
• Different probe types (also automatic motorized probes) available

• wet and dry density, % compaction, % moisture
• measuring depth: 50 ... 300 mm
• measurement within 5 seconds
• internal data memory for 4200 values
• status bar for GPS signal, memory and battery
• 5-inch touch screen
• location determination via GPS
• software
• standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Endoscope cable length: approx. 2 m / 6.5 ft
• Diameter: 3.8mm / 0.15"
• Camera resolution 160,000 pixels each
• Viewing angle front camera 120°, side camera 90°
• Focusing distance 5 … 50 mm / 0.19 … 1.96" each
• Camera head length: 42 mm / 1.6"
• Bending radius at 90° 35 mm / 1.3"
• Live images from both cameras side by side
• 7" touch screen for easy operation
• Replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

Our motorized tension dynamometer test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized tension dynamometer test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized tension dynamometer test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

• torque: 0.01 ... 100 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Diameter: Ø2.8mm / 0.11"
• Cable length: 2m / 6.5 ft
• Camera direction: 0°
• Resolution: 160,000 pixels
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• Replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

The class 2 data logging decibel meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The decibel meter is a class 2 device and is equipped with an octave band frequency filter. The decibel meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator

The class 2 data logging SPL meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The SPL meter is a class 2 device and is equipped with an octave band frequency filter. The SPL meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator