Products for 'Ultrasonic Wall Thickness Gauges PCE TG 75 ICA incl. ISO Calibration Certificate '

Ultrasonic Wall Thickness Gauges PCE-TG 150A HT-ICA incl. ISO-calibration certificate

US$ 1,422.00

ex. VAT, ex. delivery costs

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C
- incl. ISO-calibration certificate

Wall Thickness Gauge PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

US$ 1,413.00

ex. VAT, ex. delivery costs

The ultrasonic wall thickness gauges can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic wall thickness gauges.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

Ultrasonic Thickness Gauge PCE-TG 300-HT5-ICA incl. ISO calibration certificate

US$ 1,738.00

ex. VAT, ex. delivery costs

The PCE-TG 300-HT5 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 12mm / 0.47"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Ultrasonic Thickness Gauge PCE-TG 300-P5EE-ICA incl. ISO calibration certificate

US$ 1,844.00

ex. VAT, ex. delivery costs

The PCE-TG 300-P5EE is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Ultrasonic Wall Thickness Gauges PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,020.00

ex. VAT, ex. delivery costs

The ultrasonic wall thickness gauges can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic wall thickness gauges.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Ultrasonic Flow Tester PCE-TDS 75-ICA incl. ISO Calibration Certificate

US$ 3,288.00

ex. VAT, ex. delivery costs

The ultrasonic flow tester is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the ultrasonic flow tester can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Thickness Gauge PCE-TG 300-NO2-ICA incl. ISO calibration certificate

US$ 1,567.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO2 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
Diameter: 14 mm / 0.55"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 2.5 MHz
Bluetooth
incl. ISO calibration certificate

Ultrasonic testing device PCE-TDS 75-ICA incl. ISO Calibration Certificate

US$ 3,288.00

ex. VAT, ex. delivery costs

The Ultrasonic testing device is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the Ultrasonic testing device can be mounted directly on the pipes to be measured without having to cut them open.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Thickness Gauge PCE-TG 300-NO7-ICA incl. ISO calibration certificate

US$ 1,557.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO7 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: 0.65 … 200 mm / 0.025 … 7.87" (steel)
Diameter: 6 mm / 0.23"
Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
Frequency: 7 MHz
Bluetooth
incl. ISO calibration certificate