Products for 'NDT Tester PCE CT 25 '

NDT Tester - Hardness Tester PCE-HT 224E with Digital Display

US$ 1,012.00

ex. VAT, ex. delivery costs

The NDT Tester is a measuring tool for testing the strength of concrete. The NDT Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the NDT Tester. The NDT Tester is also suitable for measuring hardness of rolled paper. The NDT Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
Digital Display of results
USB interface for connection to a PC
Data storage
Rechargeable battery

Material Tester PCE-CT 80-FN0D5

US$ 913.00

ex. VAT, ex. delivery costs

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Automotive Tester PCE-CT 80-FN0D5

US$ 913.00

ex. VAT, ex. delivery costs

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

NDT Tester - Opacity Meter PCE-RM 100

US$ 888.00

ex. VAT, ex. delivery costs

The NDT tester - opacity meter PCE-RM 100 is used to measure the reflection properties of surfaces. The NDT tester - opacity meter PCE-RM 100 is used in tinting glass, film quality, opacity of paper, light shading and the hiding power of various paints, inks, and coatings.

Measuring range: 0 … 100 (0 is transparent and 100 is fully opaque)
Optical measurement angle: 45º degree angle
Measuring accuracy: ± 1
Resolution: 0.1
Battery operation
Interface and software

Paint Thickness Tester PCE-CT 80-FN0D5

US$ 913.00

ex. VAT, ex. delivery costs

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Surface Tester PCE-CT 80-FN0D5

US$ 913.00

ex. VAT, ex. delivery costs

The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

NDT Tester - Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,020.00

ex. VAT, ex. delivery costs

The NDT tester - thickness Meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the NDT tester - thickness Meter.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

NDT Tester - Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate

US$ 999.00

ex. VAT, ex. delivery costs

The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

Measurement geometry: 60°
Measuring range up to 1000 GU
Measuring surface: Ø 4.5 mm
Data storage: 1245 measured values
Interface: Micro USB
Incl. ISO calibration certificate

Paint Gauge PCE-CT 80-FN0D5

US$ 913.00

ex. VAT, ex. delivery costs

The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"