Gas Detector PCE-LDC 20
US$ 6,851.00
ex. VAT, ex. delivery costs
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

  • Units: bar, psi, MPa, l/min, m³/h, cfm
  • Leak detection in compressed air, refrigerant  and gas systems
  • Leakage assessment
  • Various attachments
  • Wireless headphones
  • Frequency: 38 . .. 42 kHz
  • Measurement rate: 1 Hz
  • Memory capacity: 1 GB
Gas Detector HFX205-100
US$ 1,577.00
ex. VAT, ex. delivery costs

This Gas Detector is designed to detect formaldehyde in air. The Gas Detector shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Gas Detector runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.

  • Range Formaldehyde: 0…100 ppm
  • Short reaction time
  • Real-time display
  • Manual and auto data storage
  • High-speed USB
  • Software for Online Data transfer

Gas Leak Detector PCE-LDC 20
US$ 6,851.00
ex. VAT, ex. delivery costs
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

  • Units: bar, psi, MPa, l/min, m³/h, cfm
  • Leak detection in compressed air, refrigerant  and gas systems
  • Leakage assessment
  • Various attachments
  • Wireless headphones
  • Frequency: 38 . .. 42 kHz
  • Measurement rate: 1 Hz
  • Memory capacity: 1 GB
Gas Detector PCE-LDC 15
US$ 5,082.00
ex. VAT, ex. delivery costs

The gas detector is used in various areas of industry. For example, the gas detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

  • Working frequency: 40 kHz (± 2 kHz)
  • Operating time: >10 hours
  • Various attachments
  • Color display: 3.5" touch panel TFT
  • Soundproof headphones

Gas Leak Detector PCE-LDC 15
US$ 5,082.00
ex. VAT, ex. delivery costs

The gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

  • Working frequency: 40 kHz (± 2 kHz)
  • Operating time: >10 hours
  • Various attachments
  • Color display: 3.5" touch panel TFT
  • Soundproof headphones

Gas Detector PCE-WMM 100
US$ 1,055.00
ex. VAT, ex. delivery costs

The gas detector PCE-WMM 100 consists of a main unit and a remote display. The CO2 gas detector is used to measure carbon dioxide and oxygen in a fixed location. The gas detector has two relays that can be used to control alarm lights or sounders.

  • Measuring range CO2: 0 … 50000 ppm
  • Measuring range O2: 0 … 30 %
  • Measuring range temperature: 0 … 50 °C / 32 … 122 °F
  • Main and remote unit
  • Alarm relay
  • 4 … 20 mA analog outputs
  • Acoustic alarm

Radiation Detector PCE-LMD 100
US$ 4,933.00
ex. VAT, ex. delivery costs
The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

  • Measurement range: 0.00 … 50000 cd/m²
  • Resolution: 0.01 cd/m²
  • Accuracy class:  A in accordance with DIN 5032-7
  • External sensor with multifunction button
  • 8 GB measured value memory
Gas Detector Gas-Pro-3
US$ 2,804.00
ex. VAT, ex. delivery costs

This gas detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.


  • Purpose: Personal protection
  • Sensor type: CO / CO2 / H2S / O2 / CH4
  • Memory: Yes
  • Interface: USB
  • Includes suction pump
  • Other gas sensors available upon request. Please email jmu@pce-  instruments.com (UK) or rhe@pce-instruments.com (US) for details


Gas Leak Detector PCE-LDC 20
US$ 6,851.00
ex. VAT, ex. delivery costs
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

  • Units: bar, psi, MPa, l/min, m³/h, cfm
  • Leak detection in compressed air, refrigerant  and gas systems
  • Leakage assessment
  • Various attachments
  • Wireless headphones
  • Frequency: 38 . .. 42 kHz
  • Measurement rate: 1 Hz
  • Memory capacity: 1 GB