Products for 'Endüstriyel Dijital Termometre PCE HMM 50 '

US$ 15,168.00

ex. VAT, ex. delivery costs

The Density Meter is a modern measuring instrument that enables precise analyses of wet and dry density, degree of compaction and moisture content in soil. Equipped with an integrated GPS, the Density Meter provides precise location data for every measurement.

wet and dry density, % compaction, % moisture
measuring depth: 50 ... 300 mm
measurement within 5 seconds
internal data memory for 4200 values
status bar for GPS signal, memory and battery
5-inch touch screen
location determination via GPS
software
standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

Building Moisture Meter / Building Material Moisture Meter PCE-SCD 50

US$ 15,168.00

ex. VAT, ex. delivery costs

The Building Moisture Meter / Building Material Moisture Meter is a modern measuring instrument that enables precise analyses of wet and dry density, degree of compaction and moisture content in soil. Equipped with an integrated GPS, the Building Moisture Meter / Building Material Moisture Meter provides precise location data for every measurement.

wet and dry density, % compaction, % moisture
measuring depth: 50 ... 300 mm
measurement within 5 seconds
internal data memory for 4200 values
status bar for GPS signal, memory and battery
5-inch touch screen
location determination via GPS
software
standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

Weighing Hook PCE-DDM 50

US$ 5,804.00

ex. VAT, ex. delivery costs

The PCE-DDM 50 weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

Measurement range: 50,000 kg / 500 kN / 110,231 lbs
Resolution: 20 kg / 200 N
Units of measurement: kg / t / lbs / N / kN
Supplied with remote control indicator

Force Gage PCE-DDM 50

US$ 5,804.00

ex. VAT, ex. delivery costs

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

Measurement range: 50,000 kg / 500 kN / 110,231 lb
Resolution: 20 kg / 200 N / 44 lb
Minimum load: 400 kg / 881 lb
Supplied with remote control indicator

Suspended Scale PCE-DDM 50

US$ 5,804.00

ex. VAT, ex. delivery costs

The suspended scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The suspended scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

Measurement range: 50,000 kg / 500 kN / 110,231 lbs
Resolution: 20 kg / 200 N
Units of measurement: kg / t / lbs / N / kN
Supplied with remote control indicator

Material Tester PCE-ACA 50

US$ 5,121.00

ex. VAT, ex. delivery costs

The Material Tester is mainly used to determine the ash content of plastics. The Material Tester can intelligently control time and temperature in the individual sections of the heating process. It is suitable for determining the ash content in polyethylene, polypropylene and polybutene plastics.

temperature range: 5 ... 1000 °C
resolution: 0.01 °C
accuracy: ±5 °C
8-inch capacitive touch screen
cylindrical heating chamber
programmable temperature control
measures according to ISO 3451 and GB / T9345.1-2008

Test Stand PCE-ACA 50

US$ 5,121.00

ex. VAT, ex. delivery costs

The Test Stand is mainly used to determine the ash content of plastics. The Test Stand can intelligently control time and temperature in the individual sections of the heating process. It is suitable for determining the ash content in polyethylene, polypropylene and polybutene plastics.

temperature range: 5 ... 1000 °C
resolution: 0.01 °C
accuracy: ±5 °C
8-inch capacitive touch screen
cylindrical heating chamber
programmable temperature control
measures according to ISO 3451 and GB / T9345.1-2008

Ash Content Analyzer / Incinerator PCE-ACA 50

US$ 5,121.00

ex. VAT, ex. delivery costs

The Ash Content Analyzer / Incinerator is mainly used to determine the ash content of plastics. The Ash Content Analyzer / Incinerator can intelligently control time and temperature in the individual sections of the heating process. It is suitable for determining the ash content in polyethylene, polypropylene and polybutene plastics.

temperature range: 5 ... 1000 °C
resolution: 0.01 °C
accuracy: ±5 °C
8-inch capacitive touch screen
cylindrical heating chamber
programmable temperature control
measures according to ISO 3451 and GB / T9345.1-2008

Defectoscope PCE-UFD 50

US$ 3,545.00

ex. VAT, ex. delivery costs

The defectoscope is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the defectoscope considerably easier.

Test range: 0 … 10000 mm
Pulse shift: -20 … +3400 µs
Single or dual probe measurement
AVG and DAC evaluation methods
Speed of sound 1000 … 15000 m/s
USB interface and software
Memory for up to 100 data records

Flaw Detector PCE-UFD 50

US$ 3,545.00

ex. VAT, ex. delivery costs

The flaw detector is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the flaw detector considerably easier.

Test range: 0 … 10000 mm
Pulse shift: -20 … +3400 µs
Single or dual probe measurement
AVG and DAC evaluation methods
Speed of sound 1000 … 15000 m/s
USB interface and software
Memory for up to 100 data records

Data Logger PCE-CPC 50

US$ 3,091.00

ex. VAT, ex. delivery costs

The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the data logger is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Air Sampler PCE-CPC 50

US$ 3,091.00

ex. VAT, ex. delivery costs

The state-of-the-art air samplerenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air sampler is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Dust Monitor PCE-CPC 50

US$ 3,091.00

ex. VAT, ex. delivery costs

The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the dust monitor is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Particle Counter PCE-CPC 50

US$ 3,091.00

ex. VAT, ex. delivery costs

The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the particle counter is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Ultrasonic testing device PCE-UFD 50

US$ 3,545.00

ex. VAT, ex. delivery costs

The Ultrasonic testing device is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the Ultrasonic testing device considerably easier.

Test range: 0 … 10000 mm
Pulse shift: -20 … +3400 µs
Single or dual probe measurement
AVG and DAC evaluation methods
Speed of sound 1000 … 15000 m/s
USB interface and software
Memory for up to 100 data records

Ultrasonic testing device PCE-UFD 50

US$ 3,545.00

ex. VAT, ex. delivery costs

Test range: 0 … 10000 mm
Pulse shift: -20 … +3400 µs
Single or dual probe measurement
AVG and DAC evaluation methods
Speed of sound 1000 … 15000 m/s
USB interface and software
Memory for up to 100 data records

Ultrasonic Thickness Gauges PCE-UFD 50

US$ 3,545.00

ex. VAT, ex. delivery costs

The ultrasonic thickness gauges is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the ultrasonic thickness gauges considerably easier.

Test range: 0 … 10000 mm
Pulse shift: -20 … +3400 µs
Single or dual probe measurement
AVG and DAC evaluation methods
Speed of sound 1000 … 15000 m/s
USB interface and software
Memory for up to 100 data records

Ultrasonic Thickness Tester PCE-UFD 50

US$ 3,545.00

ex. VAT, ex. delivery costs

The ultrasonic thickness tester is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the ultrasonic thickness tester considerably easier.

Test range: 0 … 10000 mm
Pulse shift: -20 … +3400 µs
Single or dual probe measurement
AVG and DAC evaluation methods
Speed of sound 1000 … 15000 m/s
USB interface and software
Memory for up to 100 data records