Products for 'Electrical Tester PCE ODM 10 '

Electrical Tester PCE-MCM 10-ICA incl. ISO Calibration Certificate

US$ 590.00

ex. VAT, ex. delivery costs

The electrical tester has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the electrical tester is a particularly accurate measuring instrument. In order to conveniently perform measurements with the electrical tester, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

Measuring range 1: ±20.99 mA DC
Measuring range 2: ±21.0 … ±99.9 mA DC
Diameter of clamp opening: Ø5 mm
Detachable electrical tester with 1 m / 3.3 ft cable
- Incl. ISO Calibration Certificate

Electrical Tester PCE-CTI 10-ICA incl. ISO Calibration Certificate

US$ 581.00

ex. VAT, ex. delivery costs

The electrical tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the electrical tester is inductive. To do this, the supply line is placed in the electrical tester.

Measuring range: 0 … 1500 V AC/DC
Free app for Android and iOS
Data logging for up to 100,000 measured values
Inrush current measurement
Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
incl. ISO Calibration Certificate

Electric Vehicle EVSE Tester PCE-EVSE 310+

US$ 562.00

ex. VAT, ex. delivery costs

The electric vehicle EVSE tester is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

- PE pre-test

- Proximity-Pilot PP / Control-Pilot CP

- Simulation CP error "E" / PE error

- Mains socket for measuring purposes

- Safety measuring sockets

- incl. type 2 plug and adapter to type 1

Electrical Tester PCE-CLT 20-ICA incl. ISO calibration certificate

US$ 618.00

ex. VAT, ex. delivery costs

The electrical tester represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the electrical tester determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω.

Cable Length: 0.1 m … 30 km
Standard Cable Types: Selectable from 0.15 … 240 mm²
Units in meters, kilometers, and feet
8 memory slots for custom cable types

Copper and aluminum cables
Resistance: 0.1 mΩ … 1999.9 Ω
incl. ISO calibration certificate

Environmental Tester PCE-AQD 10

US$ 600.00

ex. VAT, ex. delivery costs

The environmental tester PCE-AQD 10 is used to measure air quality. The environmental tester measures carbon dioxide, temperature and humidity. The CO2 sensor from the environmental tester is disconnected from the main unit with a connection cable.

Measuring range: 0 … 4000 ppm
Measuring range: 10 … 90% rh
Measuring range: 0 … 50°C / 32 … 122°F
Memory on SD card
3 parameters of air quality
CO2, air temperature and humidity

Clamp on Tester PCE-MCM 10-ICA incl. ISO Calibration Certificate

US$ 590.00

ex. VAT, ex. delivery costs

The clamp on tester has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the clamp on tester is a particularly accurate measuring instrument. In order to conveniently perform measurements with the clamp on tester, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

Measuring range 1: ±20.99 mA DC
Measuring range 2: ±21.0 … ±99.9 mA DC
Diameter of clamp opening: Ø5 mm
Detachable clamp on tester with 1 m / 3.3 ft cable
- Incl. ISO Calibration Certificate

Clamp on Tester PCE-CTI 10-ICA incl. ISO Calibration Certificate

US$ 581.00

ex. VAT, ex. delivery costs

The clamp on tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp on tester is inductive. To do this, the supply line is placed in the clamp on tester.

Measuring range: 0 … 1500 V AC/DC
Free app for Android and iOS
Data logging for up to 100,000 measured values
Inrush current measurement
Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
incl. ISO Calibration Certificate

Automotive Tester PCE-CTI 10-ICA incl. ISO Calibration Certificate

US$ 581.00

ex. VAT, ex. delivery costs

The automotive tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the automotive tester is inductive. To do this, the supply line is placed in the automotive tester.

Measuring range: 0 … 1500 V AC/DC
Free app for Android and iOS
Data logging for up to 100,000 measured values
Inrush current measurement
Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
incl. ISO Calibration Certificate

Automotive Tester PCE-MCM 10-ICA incl. ISO Calibration Certificate

US$ 590.00

ex. VAT, ex. delivery costs

The automotive tester has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the automotive tester is a particularly accurate measuring instrument. In order to conveniently perform measurements with the automotive tester, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

Measuring range 1: ±20.99 mA DC
Measuring range 2: ±21.0 … ±99.9 mA DC
Diameter of clamp opening: Ø5 mm
Detachable automotive tester with 1 m / 3.3 ft cable
- Incl. ISO Calibration Certificate