Products for 'Electrical Tester PCE DC 20 '

US$ 5,636.00

ex. VAT, ex. delivery costs

The electrical tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The electrical tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

Voltages: 1 … 1000 V
Current: 15 … 3000 A AC
Graphical representation of waveform and vector graphics
Data logger with 8 GB storage
LAN and USB data interface
Includes flexible current clamps
Compliance with standards: IEC61000-4-30, 61000-4-15,
61000-4-7, EN50160

Electrical Tester PCE-PA 8500-ICA incl. ISO-Calibration Certificate

US$ 6,376.00

ex. VAT, ex. delivery costs

Voltages: 1 … 1000 V
Current: 15 … 3000 A AC
Graphical representation of waveform and vector graphics
Data logger with 8 GB storage
LAN and USB data interface
Includes flexible current clamps
Compliance with standards: IEC61000-4-30, 61000-4-15,
61000-4-7, EN50160
incl. ISO-Calibration Certificate

Material Tester for Metals PCE-COM 20

US$ 7,761.00

ex. VAT, ex. delivery costs

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration

Conductivity Tester for Metals PCE-COM 20

US$ 7,761.00

ex. VAT, ex. delivery costs

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration

Electrical Tester PCE-PA 8500 HP

US$ 4,335.00

ex. VAT, ex. delivery costs

The electrical tester redefines the standards in electrical measurement technology and offers a comprehensive range of functions for precise and detailed measurements. The electrical tester enables accurate measurements of electrical voltage, current, frequency, harmonics, harmonic and starting currents. In addition, precise power and energy measurements can be made, enabling accurate monitoring and optimisation of energy consumption.

Voltages: 1 … 1000 V
Current: 1 … 1500 A AC
Graphical representation of the
waveform and vector graphics
Data logger with 8 GB memory
LAN and USB data interface
incl. flexible current clamps
Test standards:
IEC61000-4-30, 61000-4-15, 61000-4-7, EN50160

Electrical Tester PCE-830-2

US$ 3,564.00

ex. VAT, ex. delivery costs

The PCE-830-2 Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

PCE-830 + PCE-6802 amp clamp (1000 A)
Electrical conductor pick-up: 55 mm / 2.1 in diameter
Range selection: manual (10 A, 100 A, 1000 A)
Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
Sampling rate: 2 sec.
Memory size: 512 kB (max. 52,000 values (single phase)

Electrical Tester PCE-PA 8300-1

US$ 3,956.00

ex. VAT, ex. delivery costs

The easy-to-use PCE-PA 8300 Electrical Tester is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:

Voltage measurement range of 10 V … 600 V AC
Current measurement range of (Set 1) 20 A … 1200 A AC
Performance measurement range of 0 kW … 9.999 MW (VA/VAR)
Simultaneous display of harmonics and waveform
Graphic Phasor diagram
Captures transients including dip, swell, and outage

Electrical Tester PCE-PA 8300-2

US$ 4,105.00

ex. VAT, ex. delivery costs

Voltage measurement range of 10 V … 600 V AC
Current measurement range of (Set 2) 30 A … 3000 A AC
Performance measurement range of 0 kW … 9.999 MW (VA/VAR)
Simultaneous display of harmonics and waveform
Graphic Phasor diagram
Captures transients including dip, swell, and outage

Electrical Tester PCE-IT 150

US$ 2,450.00

ex. VAT, ex. delivery costs

The electrical tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 … 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the electrical tester.

Insulation resistance: 0 … 30 TΩ
Accuracy: ± (5% of Mw.+5 digits)
Test voltage: 500 V … 15 kV
Direct alternating voltage: 30 … 600 V
Accuracy: ± (2.0% v.Mw. +3 digits)
Polarisation index PI
Dielectric absorption ratio DAR
Memory and software